IPAC2019 - List of Authors (Zhang, H.)

Paper	Title	Page
MOPRB090	Simulation Challenges for eRHIC Beam-Beam Study	785
	Y. Luo, F.J. Willeke BNL, Upton, Long Island, New York, USA Y. Hao FRIB, East Lansing, Michigan, USA J. Qiang LBNL, Berkeley, California, USA Y. Roblin, H. Zhang JLab, Newport News, Virginia, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The 2015 Nuclear Science Advisory Committee Long Rang Plan identified the need for an electron-ion collider (EIC) facility as a gluon microscope with capabilities beyond those of any existing accelerator complex. To reach the required high energy, high luminosity, and high polarization, the eRHIC design, based on the existing heavy ion and polarized proton collider RHIC, adopts a very small \beta-function at the interaction points, a high collision repetition rate, and a novel hadron cooling scheme. A full crossing angle of 22 mrad and crab cavities for both electron and proton rings are required. In this article, we will present the high priority R\&D items related to the beam-beam interaction studies for the current eRHIC design, the simulation challenges, and our plans and methods to address them. Recent progresses on this project are reported too.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB090
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXXPLM3	Experimental and Simulation Studies of Cooling of a Bunched Ion Beam in a Storage Ring by a Bunched Electron Beam
	Y. Zhang, S.V. Benson, A. Hutton, K. Jordan, T. Powers, R.A. Rimmer, M.F. Spata, A.V. Sy, H. Wang, S. Wang, H. Zhang JLab, Newport News, Virginia, USA J. Li, X.M. Ma, L.J. Mao, M.T. Tang, J.C. Yang, X.D. Yang, H. Zhao, H.W. Zhao IMP/CAS, Lanzhou, People’s Republic of China
	Cooling of a high energy ion beam is essential for future electron-ion colliders to reach high luminosity. It is critical to demonstrate experimentally cooling by a bunched electron beam and to benchmark the experimental data with simulations. Such experimental and simulation studies were carried out by a collaboration of Jefferson Lab and Institute of Modern Physics (IMP), utilizing a DC cooler at IMP. The thermionic gun of the DC cooler was modified by pulsing its grid voltage to produce cooling electron pulses in a pulse length range of 0.07 - 3.5 µs, with a 250 kHZ repetition frequency. The performed experiments clearly demonstrated cooling of a RF focused ion bunches by this pulsed electron beam. The momentum spread of cooled ion bunch has been reduced from ~2x10^-3 to ~6x10-4 in less than 0.5 second. The simulation results agree with the measurements qualitatively. In this paper, we present a brief overview of the experiments and also show the main experimental and simulation results.
	Slides THXXPLM3 [6.436 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Simulation Challenges for eRHIC Beam-Beam Study

785

Y. Luo, F.J. Willeke
BNL, Upton, Long Island, New York, USA
Y. Hao
FRIB, East Lansing, Michigan, USA
J. Qiang
LBNL, Berkeley, California, USA
Y. Roblin, H. Zhang
JLab, Newport News, Virginia, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The 2015 Nuclear Science Advisory Committee Long Rang Plan identified the need for an electron-ion collider (EIC) facility as a gluon microscope with capabilities beyond those of any existing accelerator complex. To reach the required high energy, high luminosity, and high polarization, the eRHIC design, based on the existing heavy ion and polarized proton collider RHIC, adopts a very small \beta-function at the interaction points, a high collision repetition rate, and a novel hadron cooling scheme. A full crossing angle of 22 mrad and crab cavities for both electron and proton rings are required. In this article, we will present the high priority R\&D items related to the beam-beam interaction studies for the current eRHIC design, the simulation challenges, and our plans and methods to address them. Recent progresses on this project are reported too.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB090

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXXPLM3

Experimental and Simulation Studies of Cooling of a Bunched Ion Beam in a Storage Ring by a Bunched Electron Beam

Y. Zhang, S.V. Benson, A. Hutton, K. Jordan, T. Powers, R.A. Rimmer, M.F. Spata, A.V. Sy, H. Wang, S. Wang, H. Zhang
JLab, Newport News, Virginia, USA
J. Li, X.M. Ma, L.J. Mao, M.T. Tang, J.C. Yang, X.D. Yang, H. Zhao, H.W. Zhao
IMP/CAS, Lanzhou, People’s Republic of China

Cooling of a high energy ion beam is essential for future electron-ion colliders to reach high luminosity. It is critical to demonstrate experimentally cooling by a bunched electron beam and to benchmark the experimental data with simulations. Such experimental and simulation studies were carried out by a collaboration of Jefferson Lab and Institute of Modern Physics (IMP), utilizing a DC cooler at IMP. The thermionic gun of the DC cooler was modified by pulsing its grid voltage to produce cooling electron pulses in a pulse length range of 0.07 - 3.5 µs, with a 250 kHZ repetition frequency. The performed experiments clearly demonstrated cooling of a RF focused ion bunches by this pulsed electron beam. The momentum spread of cooled ion bunch has been reduced from ~2x10^-3 to ~6x10-4 in less than 0.5 second. The simulation results agree with the measurements qualitatively. In this paper, we present a brief overview of the experiments and also show the main experimental and simulation results.

Slides THXXPLM3 [6.436 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)