IPAC2019 - List of Authors (Shibata, T.)

Paper	Title	Page
MOPTS046	Upgrade of the 3-MeV LINAC for Testing of Accelerator Components at J-PARC	960
	Y. Kondo, K. Hirano, T. Ito, N. Kikuzawa, R. Kitamura, T. Morishita, H. Oguri, K. Ohkoshi, S. Shinozaki, K. Shinto JAEA/J-PARC, Tokai-mura, Japan Z. Fang, Y. Fukui, K. Futatsukawa, K. Ikegami, T. Miyao, K. Nanmo, M. Otani, T. Shibata KEK, Ibaraki, Japan T. Hori, Y. Nemoto, Y. Sato Nippon Advanced Technology Co., Ltd., Tokai, Japan T. Ishiyama, Y. Sawabe Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan Y. Ito Total Saport System Corp., Naka-gun, Ibaraki, Japan Y. Kato Total Support Systems Corporation, Tokai-mura, Naka-gun, Ibaraki, Japan F. Kobayashi ULVAC Human Relations, Ltd., Kanagawa, Japan D. Takahashi, R. Tasaki KIS, Ibaraki, Japan
	We are now upgrading a 3-MeV linac at J-PARC. The old 30-mA RFQ is replaced by a spare one of the J-PARC 50-mA RFQ. The ion source is same as the J-PARC linac’s, therefore, the peak beam current is upgraded from 30 mA to 50 mA. This 3-MeV linac will be used for development of various accelerator components, such as beam dyagnostics devices, laser charge exchange equipments, new MEBT buncher, and so on. In this paper, present status of this 3-MeV test linac is presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS046
About •	paper received ※ 30 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS027	Progress of J-PARC LINAC Commissioning	1990
	Y. Liu KEK/JAEA, Ibaraki-Ken, Japan Z. Fang, K. Futatsukawa, T. Miyao, M. Otani, T. Shibata KEK, Tokai, Ibaraki, Japan T. Ito, A. Miura, T. Morishita, K. Moriya, K. Okabe, J. Tamura JAEA/J-PARC, Tokai-mura, Japan
	After energy and intensity upgrade to 400MeV and 50mA respectively, J-PARC linac were ready for 1 MW beam power from RCS. J-PARC is now successfully operated at 50mA/400MeV for 500kW at neutron target, and on the way to 1MW. The next milestones 1.2 and 1.5MW from RCS are relying on feasibility and property of increase of peak current to 60 mA and the pulse width to 600us in linac. Beam studies were carried out at linac to study the initial beam parameters from ion source/RFQ, to find the optimized lattice and matching, to clarify beam loss source and to mitigate the loss/residue dose for the power upgrade.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS027
About •	paper received ※ 17 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Upgrade of the 3-MeV LINAC for Testing of Accelerator Components at J-PARC

960

Y. Kondo, K. Hirano, T. Ito, N. Kikuzawa, R. Kitamura, T. Morishita, H. Oguri, K. Ohkoshi, S. Shinozaki, K. Shinto
JAEA/J-PARC, Tokai-mura, Japan
Z. Fang, Y. Fukui, K. Futatsukawa, K. Ikegami, T. Miyao, K. Nanmo, M. Otani, T. Shibata
KEK, Ibaraki, Japan
T. Hori, Y. Nemoto, Y. Sato
Nippon Advanced Technology Co., Ltd., Tokai, Japan
T. Ishiyama, Y. Sawabe
Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan
Y. Ito
Total Saport System Corp., Naka-gun, Ibaraki, Japan
Y. Kato
Total Support Systems Corporation, Tokai-mura, Naka-gun, Ibaraki, Japan
F. Kobayashi
ULVAC Human Relations, Ltd., Kanagawa, Japan
D. Takahashi, R. Tasaki
KIS, Ibaraki, Japan

We are now upgrading a 3-MeV linac at J-PARC. The old 30-mA RFQ is replaced by a spare one of the J-PARC 50-mA RFQ. The ion source is same as the J-PARC linac’s, therefore, the peak beam current is upgraded from 30 mA to 50 mA. This 3-MeV linac will be used for development of various accelerator components, such as beam dyagnostics devices, laser charge exchange equipments, new MEBT buncher, and so on. In this paper, present status of this 3-MeV test linac is presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS046

About •

paper received ※ 30 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS027

Progress of J-PARC LINAC Commissioning

1990

Y. Liu
KEK/JAEA, Ibaraki-Ken, Japan
Z. Fang, K. Futatsukawa, T. Miyao, M. Otani, T. Shibata
KEK, Tokai, Ibaraki, Japan
T. Ito, A. Miura, T. Morishita, K. Moriya, K. Okabe, J. Tamura
JAEA/J-PARC, Tokai-mura, Japan

After energy and intensity upgrade to 400MeV and 50mA respectively, J-PARC linac were ready for 1 MW beam power from RCS. J-PARC is now successfully operated at 50mA/400MeV for 500kW at neutron target, and on the way to 1MW. The next milestones 1.2 and 1.5MW from RCS are relying on feasibility and property of increase of peak current to 60 mA and the pulse width to 600us in linac. Beam studies were carried out at linac to study the initial beam parameters from ion source/RFQ, to find the optimized lattice and matching, to clarify beam loss source and to mitigate the loss/residue dose for the power upgrade.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS027

About •

paper received ※ 17 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)