IPAC2019 - List of Authors (Ruber, R.J.M.Y.)

Paper	Title	Page
MOPRB046	Status of the ESSnuSB Accumulator Design	666
	Y. Zou, T.J.C. Ekelöf, M. Olvegård, R.J.M.Y. Ruber Uppsala University, Uppsala, Sweden E. Bouquerel, M. Dracos IPHC, Strasbourg Cedex 2, France M. Eshraqi, B. Gålnander ESS, Lund, Sweden H.O. Schönauer, E.H.M. Wildner CERN, Meyrin, Switzerland
	Funding: This project is supported by the COST Action CA15139 EuroNuNet. It has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 777419. The 2.0 GeV, 5 MW proton linac for the European Spallation Source, ESS, will have the capacity to accelerate additional pulses and send them to a neutrino target, providing an excellent opportunity to produce an unprecedented high performance neutrino beam, the ESS neutrino Super Beam, ESSnuSB, to measure, with precision, the CP violating phase at the 2nd oscillation maximum. In order to comply with the acceptance of the target and horn systems that will form the neutrino super beam, the long pulses from the linac must be compressed by about three orders of magnitude with minimal particle loss, something that will be achieved through multi-turn charge-exchange injection in an accumulator ring. This ring will accommodate over 2·10¹⁴ protons, which means that several design challenges are encountered. Strong space charge forces, low-loss injection with phase space painting, efficient collimation, a reliable charge stripping system, and e-p instabilities are some of the important aspects central to the design work. This paper presents the status of the accumulator ring design, with multi-particle simulations of the injections procedure.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB046
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB032	The CompactLight Design Study Project	1756
	G. D’Auria, S. Di Mitri, R.A. Rochow Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy M. Aicheler HIP, University of Helsinki, Finland A.A. Aksoy Ankara University, Accelerator Technologies Institute, Golbasi, Turkey D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, L. Piersanti, B. Spataro, C. Vaccarezza INFN/LNF, Frascati, Italy R. Apsimon, A. Castilla Cockcroft Institute, Lancaster University, Lancaster, United Kingdom J.M. Arnesano, F. Bosco, L. Ficcadenti, A. Mostacci, L. Palumbo Sapienza University of Rome, Rome, Italy A. Bernhard, J. Gethmann KIT, Karlsruhe, Germany G. Burt Lancaster University, Lancaster, United Kingdom M. Calvi, T. Schmidt, K. Zhang PSI, Villigen PSI, Switzerland H.M. Castaneda Cortes, J.A. Clarke, D.J. Dunning, N. Thompson STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom A.W. Cross, L. Zhang USTRAT/SUPA, Glasgow, United Kingdom G. Dattoli, F. Nguyen, A. Petralia ENEA C.R. Frascati, Frascati (Roma), Italy R.T. Dowd, D. Zhu AS - ANSTO, Clayton, Australia W.D. Fang SINAP, Shanghai, People’s Republic of China A. Faus-Golfe, Y. Han LAL, Orsay, France E.N. Gazis, N. Gazis National Technical University of Athens, Zografou, Greece R. Geometrante, M. Kokole KYMA, Trieste, Italy V.A. Goryashko, M. Jacewicz, R.J.M.Y. Ruber Uppsala University, Uppsala, Sweden X.J.A. Janssen, J.M.A. Priem VDL ETG, Eindhoven, The Netherlands A. Latina, X. Liu, C. Rossi, D. Schulte, S. Stapnes, X.W. Wu, W. Wuensch CERN, Geneva, Switzerland O.J. Luiten, P.H.A. Mutsaers, X.F.D. Stragier TUE, Eindhoven, The Netherlands J. Marcos, E. Marín, R. Muñoz Horta, F. Pérez ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain G. Taylor The University of Melbourne, Melbourne, Victoria, Australia
	Funding: This project has received funding from the European Union’s Horizon2020 research and innovation programme under grant agreement No 777431 The H₂020 CompactLight Project (www. CompactLight.eu) aims at designing the next generation of compact X-rays Free-Electron Lasers, relying on very high gradient accelerating structures (X-band, 12 GHz), the most advanced concepts for bright electron photo injectors, and innovative compact short-period undulators. Compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, and will be significantly more compact, with a smaller footprint, as a consequence of the lower energy and the high-gradient X-band structures. In addition, the whole infrastructure will also have a lower electrical power demand as well as lower construction and running costs.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB032
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB061	The Integration and RF Conditioning of the ESS Double-Spoke Prototype Cryomodule at FREIA	2952
	H. Li, K. Fransson, K.J. Gajewski, L. Hermansson, A. Miyazaki, R.J.M.Y. Ruber, R. Santiago Kern Uppsala University, Uppsala, Sweden
	ESS, the European Spallation Source, will adopt a single family of double-spoke cavities for accelerating the proton beam from the normal conducting section to the first family of the elliptical superconducting cavities. They will be the first double-spoke cavities in the world to be commissioned for a high power proton accelerator. The first double-spoke cavity cryomodule for the ESS project is under high power test at Uppsala University. This paper presents the integration, RF conditioning and experience of this prototype cryomodule.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB061
About •	paper received ※ 26 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of the ESSnuSB Accumulator Design

666

Y. Zou, T.J.C. Ekelöf, M. Olvegård, R.J.M.Y. Ruber
Uppsala University, Uppsala, Sweden
E. Bouquerel, M. Dracos
IPHC, Strasbourg Cedex 2, France
M. Eshraqi, B. Gålnander
ESS, Lund, Sweden
H.O. Schönauer, E.H.M. Wildner
CERN, Meyrin, Switzerland

Funding: This project is supported by the COST Action CA15139 EuroNuNet. It has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 777419.
The 2.0 GeV, 5 MW proton linac for the European Spallation Source, ESS, will have the capacity to accelerate additional pulses and send them to a neutrino target, providing an excellent opportunity to produce an unprecedented high performance neutrino beam, the ESS neutrino Super Beam, ESSnuSB, to measure, with precision, the CP violating phase at the 2nd oscillation maximum. In order to comply with the acceptance of the target and horn systems that will form the neutrino super beam, the long pulses from the linac must be compressed by about three orders of magnitude with minimal particle loss, something that will be achieved through multi-turn charge-exchange injection in an accumulator ring. This ring will accommodate over 2·10¹⁴ protons, which means that several design challenges are encountered. Strong space charge forces, low-loss injection with phase space painting, efficient collimation, a reliable charge stripping system, and e-p instabilities are some of the important aspects central to the design work. This paper presents the status of the accumulator ring design, with multi-particle simulations of the injections procedure.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB046

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB032

The CompactLight Design Study Project

1756

G. D’Auria, S. Di Mitri, R.A. Rochow
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
M. Aicheler
HIP, University of Helsinki, Finland
A.A. Aksoy
Ankara University, Accelerator Technologies Institute, Golbasi, Turkey
D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, L. Piersanti, B. Spataro, C. Vaccarezza
INFN/LNF, Frascati, Italy
R. Apsimon, A. Castilla
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
J.M. Arnesano, F. Bosco, L. Ficcadenti, A. Mostacci, L. Palumbo
Sapienza University of Rome, Rome, Italy
A. Bernhard, J. Gethmann
KIT, Karlsruhe, Germany
G. Burt
Lancaster University, Lancaster, United Kingdom
M. Calvi, T. Schmidt, K. Zhang
PSI, Villigen PSI, Switzerland
H.M. Castaneda Cortes, J.A. Clarke, D.J. Dunning, N. Thompson
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
A.W. Cross, L. Zhang
USTRAT/SUPA, Glasgow, United Kingdom
G. Dattoli, F. Nguyen, A. Petralia
ENEA C.R. Frascati, Frascati (Roma), Italy
R.T. Dowd, D. Zhu
AS - ANSTO, Clayton, Australia
W.D. Fang
SINAP, Shanghai, People’s Republic of China
A. Faus-Golfe, Y. Han
LAL, Orsay, France
E.N. Gazis, N. Gazis
National Technical University of Athens, Zografou, Greece
R. Geometrante, M. Kokole
KYMA, Trieste, Italy
V.A. Goryashko, M. Jacewicz, R.J.M.Y. Ruber
Uppsala University, Uppsala, Sweden
X.J.A. Janssen, J.M.A. Priem
VDL ETG, Eindhoven, The Netherlands
A. Latina, X. Liu, C. Rossi, D. Schulte, S. Stapnes, X.W. Wu, W. Wuensch
CERN, Geneva, Switzerland
O.J. Luiten, P.H.A. Mutsaers, X.F.D. Stragier
TUE, Eindhoven, The Netherlands
J. Marcos, E. Marín, R. Muñoz Horta, F. Pérez
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
G. Taylor
The University of Melbourne, Melbourne, Victoria, Australia

Funding: This project has received funding from the European Union’s Horizon2020 research and innovation programme under grant agreement No 777431
The H₂020 CompactLight Project (www. CompactLight.eu) aims at designing the next generation of compact X-rays Free-Electron Lasers, relying on very high gradient accelerating structures (X-band, 12 GHz), the most advanced concepts for bright electron photo injectors, and innovative compact short-period undulators. Compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, and will be significantly more compact, with a smaller footprint, as a consequence of the lower energy and the high-gradient X-band structures. In addition, the whole infrastructure will also have a lower electrical power demand as well as lower construction and running costs.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB032

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB061

The Integration and RF Conditioning of the ESS Double-Spoke Prototype Cryomodule at FREIA

2952

H. Li, K. Fransson, K.J. Gajewski, L. Hermansson, A. Miyazaki, R.J.M.Y. Ruber, R. Santiago Kern
Uppsala University, Uppsala, Sweden

ESS, the European Spallation Source, will adopt a single family of double-spoke cavities for accelerating the proton beam from the normal conducting section to the first family of the elliptical superconducting cavities. They will be the first double-spoke cavities in the world to be commissioned for a high power proton accelerator. The first double-spoke cavity cryomodule for the ESS project is under high power test at Uppsala University. This paper presents the integration, RF conditioning and experience of this prototype cryomodule.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB061

About •

paper received ※ 26 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)