IPAC2019 - List of Authors (Omet, M.)

Paper	Title	Page
MOYPLM2	SRF Operation at XFEL: Lessons Learned After More Than One Year	12
	D. Kostin, V. Ayvazyan, J. Branlard, W. Decking, L. Lilje, M. Omet, T. Schnautz, E. Vogel, N. Walker DESY, Hamburg, Germany
	The European XFEL is the largest high-field SRF installation in the world and has now been in operation more than a year. It serves as a "prototype" for other facilities being constructed or in the planning stages. Performance of the operation of the SRF system over this period of time and the lessons learned will be discussed.
	Slides MOYPLM2 [4.351 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOYPLM2
About •	paper received ※ 10 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB020	Status of the European XFEL	1721
	W. Decking, F. Brinker, L. Fröhlich, R. Kammering, T. Limberg, S. Liu, D. Nölle, M. Omet, M. Scholz, T. Wamsat DESY, Hamburg, Germany
	The European XFEL is a Hard X-ray Free Electron Laser based on superconducting accelerator technology. In operation since 2017, it now serves 3 FEL beamlines simultaneously for user experiments. We will report on the present operation of the linear accelerator, the beam distribution to the various beamlines and the performance of the FEL radiators.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB020
About •	paper received ※ 15 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB024	Piezo Controls For The European XFEL	3856
	K.P. Przygoda, J. Branlard, Ł. Butkowski, M.K. Grecki, M. Hierholzer, M. Omet, H. Schlarb DESY, Hamburg, Germany
	The European X-Ray Free Electron Laser (E-XFEL) accelerator is a pulse machine. The typical time duration of a radio frequency (RF) pulse is about 1.3 ms. The RF power transmitted to the superconducting RF (SCRF) cavity as a set of successive pulses (10 Hz repetition rate), causes strong mechanical stresses inside the cavity. The mechanical deformations of the RF cavity are typically caused by the Lorentz force detuning (LFD). The cavity can be tuned to a 1.3 GHz resonance frequency during the RF pulse using fast piezo tuners. Since the E-XFEL will use around 800 cavities (each cavity with double piezos), a distributed architecture with multi-channel digital and analog control circuits seems to be essential. The most sought-after issue is high-voltage, high-current piezo driving circuit dedicated to multi-channel configuration. The driving electronics should allow a maximum piezo protection against any kind of failure. The careful automation of the piezo tuners control and its demonstration for the high gradient conditions a real challenge. The first demonstration of piezo controls applied for chosen RF stations of the E-XFEL linear accelerator (linac) are presented and obtained results are briefly discussed within this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB024
About •	paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

SRF Operation at XFEL: Lessons Learned After More Than One Year

12

D. Kostin, V. Ayvazyan, J. Branlard, W. Decking, L. Lilje, M. Omet, T. Schnautz, E. Vogel, N. Walker
DESY, Hamburg, Germany

The European XFEL is the largest high-field SRF installation in the world and has now been in operation more than a year. It serves as a "prototype" for other facilities being constructed or in the planning stages. Performance of the operation of the SRF system over this period of time and the lessons learned will be discussed.

Slides MOYPLM2 [4.351 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOYPLM2

About •

paper received ※ 10 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB020

Status of the European XFEL

1721

W. Decking, F. Brinker, L. Fröhlich, R. Kammering, T. Limberg, S. Liu, D. Nölle, M. Omet, M. Scholz, T. Wamsat
DESY, Hamburg, Germany

The European XFEL is a Hard X-ray Free Electron Laser based on superconducting accelerator technology. In operation since 2017, it now serves 3 FEL beamlines simultaneously for user experiments. We will report on the present operation of the linear accelerator, the beam distribution to the various beamlines and the performance of the FEL radiators.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB020

About •

paper received ※ 15 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB024

Piezo Controls For The European XFEL

3856

K.P. Przygoda, J. Branlard, Ł. Butkowski, M.K. Grecki, M. Hierholzer, M. Omet, H. Schlarb
DESY, Hamburg, Germany

The European X-Ray Free Electron Laser (E-XFEL) accelerator is a pulse machine. The typical time duration of a radio frequency (RF) pulse is about 1.3 ms. The RF power transmitted to the superconducting RF (SCRF) cavity as a set of successive pulses (10 Hz repetition rate), causes strong mechanical stresses inside the cavity. The mechanical deformations of the RF cavity are typically caused by the Lorentz force detuning (LFD). The cavity can be tuned to a 1.3 GHz resonance frequency during the RF pulse using fast piezo tuners. Since the E-XFEL will use around 800 cavities (each cavity with double piezos), a distributed architecture with multi-channel digital and analog control circuits seems to be essential. The most sought-after issue is high-voltage, high-current piezo driving circuit dedicated to multi-channel configuration. The driving electronics should allow a maximum piezo protection against any kind of failure. The careful automation of the piezo tuners control and its demonstration for the high gradient conditions a real challenge. The first demonstration of piezo controls applied for chosen RF stations of the E-XFEL linear accelerator (linac) are presented and obtained results are briefly discussed within this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB024

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)