The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Seibel, A. AU - Kleffner, C.M. AU - Knie, K. AU - Ratzinger, U. AU - Vossberg, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Comparison Between Measurement and Simulation of a Full Scale Prototype for the Proton Injector at FAIR J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A dedicated 68 MeV, 70 mA proton injector is required for the research program at FAIR (Facility for Antiproton and Ion Research). This 325 MHz linear injector contains a RFQ and six CH structures. The CH (Crossbar H-mode) structures are working in the Hâ‚‚10 mode. The main acceleration of this room temperature linac will be provided by the CH structures. For the second acceleration from 11.5 MeV to 24.2 MeV a full scale prototype has been built. This structure consists of two individual CH resonators and a coupling cell. Inside the structure there are 17 tuners, they have an impact on the electric field and the frequency. For operation a flat field is required, therefore this tuners must be correctly positioned. Some series of low level tuning and frequency measurements were done to determine the size of the tuners. Low level measurements and simulations will be compared and presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 940 EP - 942 KW - cavity KW - simulation KW - proton KW - linac KW - resonance DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPTS037 UR - http://jacow.org/ipac2019/papers/mopts037.pdf ER -