IPAC2018 - List of Keywords (TANGO)

Paper	Title	Other Keywords	Page
WEPAL048	Control Command Strategy for the ThomX Accelerator	controls, HOM, GUI, network	2284
	H. Guler, N. ElKamchi, P. Gauron, H. Monard LAL, Orsay, France
	ThomX is an accelerator project designed to create a compact X Compton Backscattering Source for medical and cultural heritage applications. Control-Command (CC) system is a central part for the commissionning. ThomX CC is designed with TANGO SCADA system. This framework allows to control several devices from several places with the same SCADA System. TANGO Device Servers are software programs allowing to control devices and to implement data processing and presentation layers. For commissionning, experts need to access values of each device in a convenient way to allow them to modify parameters and check effect of a configuration on hardware. CC is a key part for this stage. Several GUI have been designed and gathered into several panels in collaboration with each expert group to gather their needs.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL048
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL106	Heating Unit Controller at NSRC SOLARIS	vacuum, controls, undulator, PLC	3885
	W.T. Kitka, P. Bulira, P. Czernecki, M.K. Fa'owski, K. Kubal, P. Kurdziel, A.M. Marendziak, M.P. Nowak, M. Ostoja-Gajewski, M. Rozwadowski, K. Wawrzyniak, Z. Zbylut Solaris National Synchrotron Radiation Centre, Jagiellonian University, Kraków, Poland
	Solaris is a third generation light source constructed at the Jagiellonian University in Kraków, Poland. The machine was designed by the MAX IV Laboratory team. Commissioning of the machine was accomplished at 2016 April and now synchrotron operate in decay mode. Two beamlines PEEM/XAS and UARPES were installed and now are being commissioned. Three more PHELIX, XMCD and diagnostic beamline have received funding and it will be installed and commissioned in range of next few years. The SOLARIS Heating Unit Controller (HUC) was designed to perform bake-out process of new installed vacuum systems. It will allow to perform activation process of undulator vacuum chamber inner coated with NEG layer and also activation process of NEG strips installed in dipole vacuum chambers. HUC is able to control independently up to six 2 kW temperature channels and two current channels. System was built based on Allen-Bradley PLC and Tango Controls. Easy access to the device is provided by the GUI design based on Taurus framework.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL106
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

WEPAL048

Control Command Strategy for the ThomX Accelerator

controls, HOM, GUI, network

2284

H. Guler, N. ElKamchi, P. Gauron, H. Monard
LAL, Orsay, France

ThomX is an accelerator project designed to create a compact X Compton Backscattering Source for medical and cultural heritage applications. Control-Command (CC) system is a central part for the commissionning. ThomX CC is designed with TANGO SCADA system. This framework allows to control several devices from several places with the same SCADA System. TANGO Device Servers are software programs allowing to control devices and to implement data processing and presentation layers. For commissionning, experts need to access values of each device in a convenient way to allow them to modify parameters and check effect of a configuration on hardware. CC is a key part for this stage. Several GUI have been designed and gathered into several panels in collaboration with each expert group to gather their needs.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL048

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL106

Heating Unit Controller at NSRC SOLARIS

vacuum, controls, undulator, PLC

3885

W.T. Kitka, P. Bulira, P. Czernecki, M.K. Fa'owski, K. Kubal, P. Kurdziel, A.M. Marendziak, M.P. Nowak, M. Ostoja-Gajewski, M. Rozwadowski, K. Wawrzyniak, Z. Zbylut
Solaris National Synchrotron Radiation Centre, Jagiellonian University, Kraków, Poland

Solaris is a third generation light source constructed at the Jagiellonian University in Kraków, Poland. The machine was designed by the MAX IV Laboratory team. Commissioning of the machine was accomplished at 2016 April and now synchrotron operate in decay mode. Two beamlines PEEM/XAS and UARPES were installed and now are being commissioned. Three more PHELIX, XMCD and diagnostic beamline have received funding and it will be installed and commissioned in range of next few years. The SOLARIS Heating Unit Controller (HUC) was designed to perform bake-out process of new installed vacuum systems. It will allow to perform activation process of undulator vacuum chamber inner coated with NEG layer and also activation process of NEG strips installed in dipole vacuum chambers. HUC is able to control independently up to six 2 kW temperature channels and two current channels. System was built based on Allen-Bradley PLC and Tango Controls. Easy access to the device is provided by the GUI design based on Taurus framework.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL106

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)