IPAC2016 - Classification: 01 Circular and Linear Colliders / A08 Linear Accelerators

Paper	Title	Page
THPOR037	TW-Structure Design and E-Field Study for CLIC Booster Linac	3868
	E. Darvish Roknabadi IPM, Tehran, Iran S. Döbert CERN, Geneva, Switzerland
	Using the SUPERFISH code we present a design for a traveling wave (TW) structure of the Booster Linac for CLIC. The structure, consisting of thirty asymmetric cells attached to the beam pipes at two ends, works in 2Pi/3 operating mode at working frequency 2 GHz. The RF field transmitted through the designed cavity is prepared in an RF field data file to be used in the PARMELA code. We will then compare the resultant output PARMELA field with that of the ideal RF field which obtained from the usual method for a traveling wave structure. * Based on CLIC Note 1051, 2015
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR040	Emittance Growth by Misalignments and Jitters in SuperKEKB Injector Linac	3871
	Y. Seimiya, Y. Enomoto, K. Furukawa, T. Higo, T. Kamitani, F. Miyahara, Y. Ohnishi, M. Satoh, T. Suwada, M. Tanaka KEK, Ibaraki, Japan
	Funding: This work was partly supported by JSPS KAKENHI Grant Number 16K17545. SuperKEKB injector linac have to transport high-charged beam with low emittance to SuperKEKB ring for high luminosity, 8¥times10³⁵. For the low emittance, photocathode RF gun was adopted as electron source. One of the main reason of the beam emittance blow-up electron linac is generally induced by wakefield in acceleration cavities. A charged beam with a offset from a center of a cavity is affected by the wakefield depending on the offset size in the acceleration cavity and the beam emittance is increased. This emittance blow-up can be eliminated by appropriate steering magnet control so as to cancel the wake effect in the acceleration cavity. We perform particle tracking simulation with some misalignments and beam jitter. Emittance growth by the misalignments and the beam jitter is evaluated in this report.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR041	High Gradient Properties of a CLIC Prototype Accelerating Structure made by Tsinghua University	3874
	X.W. Wu, H.B. Chen, J. Shi TUB, Beijing, People's Republic of China T. Higo, S. Matsumoto KEK, Ibaraki, Japan W. Wuensch CERN, Geneva, Switzerland
	A CLIC prototype structure, T24_THU_#1, was recently high-gradient tested at KEK X-band test stand, Nextef. The copper parts of this 24-cell TW structure were delivered from CERN, were bonded and brazed, bench-tested and tuned in Tsinghua University. The aim of this test was not only to verify the cavity high-gradient properties under 100 MV/m but also to study the breakdown phenomenon in high gradient. High power test results were presented and breakdown rate under 100 MV/m was compared to previously-tested CLIC prototype structures. The assembly capability of Tsinghua University for X-band high gradient structures was validated by the good high gradient performance of T24_THU_#1.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR042	New Quantity Describing the Pulse Shape Dependence of the High Gradient Limit in Single Cell Standing-Wave Accelerating Structures	3878
	J. Shi, H.B. Chen, X.W. Wu TUB, Beijing, People's Republic of China V.A. Dolgashev SLAC, Menlo Park, California, USA A. Grudiev, W. Wuensch CERN, Geneva, Switzerland Y. Higashi KEK, Ibaraki, Japan B. Spataro INFN/LNF, Frascati (Roma), Italy
	A new quantity has been developed to study the relationship among the breakdown rate, the pulse width and the gradient. Difference pulse shapes can be treated by introducing a Green's function. This paper describes the quantity and the results while it is applied to the data of many high-power test runs of different single-cell standing wave accelerating structures. A remarkably similar relationship between the new quantity and breakdown rate is observed from all of the test results.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR043	High Power Test of X-band Single Cell HOM-free Choke-mode Damped Accelerating Structure made by Tsinghua University	3881
	X.W. Wu, H.B. Chen, J. Shi TUB, Beijing, People's Republic of China T. Abe, T. Higo KEK, Ibaraki, Japan W. Wuensch, H. Zha CERN, Geneva, Switzerland
	As an alternative design for CLIC main accelerating structures, X-band choke-mode damped structures had been studied for several years. However, the performance of choke-mode cavity under high power is still in lack of research. Two standing wave single cell choke-mode damped accelerating structures with different choke dimensions which are working at 11.424 GHz were designed, manufactured and bench tested by accelerator group in Tsinghua University. High power test was carried out on it to study the breakdown phenomenon in high gradient. A single cell structure without choke which almost has the same inner dimension as choke-mode cavity will also be tested to make a comparison and study how the choke affects high-gradient properties.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR044	mm-Wave Standing-Wave Accelerating Structures for High-Gradient Tests	3884
	E.A. Nanni, M. Dal Forno, V.A. Dolgashev, J. Neilson, S.G. Tantawi SLAC, Menlo Park, California, USA S.C. Schaub MIT, Cambridge, Massachusetts, USA R.J. Temkin MIT/PSFC, Cambridge, Massachusetts, USA
	We present the design and parameters of single-cell accelerating structures for high-gradient testing at 110 GHz. The purpose of this work is to study the basic physics of ultrahigh vacuum RF breakdown in high-gradient RF accelerators. The accelerating structures consist of pi-mode standing-wave cavities fed with TM01 circular waveguide mode. The geometry and field shape of these accelerating structures is as close as practical to single-cell standing-wave X-band accelerating structures, more than 40 of which were tested at SLAC. This wealth of X-band data will serve as a baseline for these 110 GHz tests. The structures will be powered from a pulsed MW gyrotron oscillator. One MW of RF power from the gyrotron may allow us to reach a peak accelerating gradient of 400 MeV/m.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TW-Structure Design and E-Field Study for CLIC Booster Linac

3868

E. Darvish Roknabadi
IPM, Tehran, Iran
S. Döbert
CERN, Geneva, Switzerland

Using the SUPERFISH code we present a design for a traveling wave (TW) structure of the Booster Linac for CLIC. The structure, consisting of thirty asymmetric cells attached to the beam pipes at two ends, works in 2Pi/3 operating mode at working frequency 2 GHz. The RF field transmitted through the designed cavity is prepared in an RF field data file to be used in the PARMELA code. We will then compare the resultant output PARMELA field with that of the ideal RF field which obtained from the usual method for a traveling wave structure.
* Based on CLIC Note 1051, 2015

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR040

Emittance Growth by Misalignments and Jitters in SuperKEKB Injector Linac

3871

Y. Seimiya, Y. Enomoto, K. Furukawa, T. Higo, T. Kamitani, F. Miyahara, Y. Ohnishi, M. Satoh, T. Suwada, M. Tanaka
KEK, Ibaraki, Japan

Funding: This work was partly supported by JSPS KAKENHI Grant Number 16K17545.
SuperKEKB injector linac have to transport high-charged beam with low emittance to SuperKEKB ring for high luminosity, 8¥times10³⁵. For the low emittance, photocathode RF gun was adopted as electron source. One of the main reason of the beam emittance blow-up electron linac is generally induced by wakefield in acceleration cavities. A charged beam with a offset from a center of a cavity is affected by the wakefield depending on the offset size in the acceleration cavity and the beam emittance is increased. This emittance blow-up can be eliminated by appropriate steering magnet control so as to cancel the wake effect in the acceleration cavity. We perform particle tracking simulation with some misalignments and beam jitter. Emittance growth by the misalignments and the beam jitter is evaluated in this report.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR041

High Gradient Properties of a CLIC Prototype Accelerating Structure made by Tsinghua University

3874

X.W. Wu, H.B. Chen, J. Shi
TUB, Beijing, People's Republic of China
T. Higo, S. Matsumoto
KEK, Ibaraki, Japan
W. Wuensch
CERN, Geneva, Switzerland

A CLIC prototype structure, T24_THU_#1, was recently high-gradient tested at KEK X-band test stand, Nextef. The copper parts of this 24-cell TW structure were delivered from CERN, were bonded and brazed, bench-tested and tuned in Tsinghua University. The aim of this test was not only to verify the cavity high-gradient properties under 100 MV/m but also to study the breakdown phenomenon in high gradient. High power test results were presented and breakdown rate under 100 MV/m was compared to previously-tested CLIC prototype structures. The assembly capability of Tsinghua University for X-band high gradient structures was validated by the good high gradient performance of T24_THU_#1.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR042

New Quantity Describing the Pulse Shape Dependence of the High Gradient Limit in Single Cell Standing-Wave Accelerating Structures

3878

J. Shi, H.B. Chen, X.W. Wu
TUB, Beijing, People's Republic of China
V.A. Dolgashev
SLAC, Menlo Park, California, USA
A. Grudiev, W. Wuensch
CERN, Geneva, Switzerland
Y. Higashi
KEK, Ibaraki, Japan
B. Spataro
INFN/LNF, Frascati (Roma), Italy

A new quantity has been developed to study the relationship among the breakdown rate, the pulse width and the gradient. Difference pulse shapes can be treated by introducing a Green's function. This paper describes the quantity and the results while it is applied to the data of many high-power test runs of different single-cell standing wave accelerating structures. A remarkably similar relationship between the new quantity and breakdown rate is observed from all of the test results.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR043

High Power Test of X-band Single Cell HOM-free Choke-mode Damped Accelerating Structure made by Tsinghua University

3881

X.W. Wu, H.B. Chen, J. Shi
TUB, Beijing, People's Republic of China
T. Abe, T. Higo
KEK, Ibaraki, Japan
W. Wuensch, H. Zha
CERN, Geneva, Switzerland

As an alternative design for CLIC main accelerating structures, X-band choke-mode damped structures had been studied for several years. However, the performance of choke-mode cavity under high power is still in lack of research. Two standing wave single cell choke-mode damped accelerating structures with different choke dimensions which are working at 11.424 GHz were designed, manufactured and bench tested by accelerator group in Tsinghua University. High power test was carried out on it to study the breakdown phenomenon in high gradient. A single cell structure without choke which almost has the same inner dimension as choke-mode cavity will also be tested to make a comparison and study how the choke affects high-gradient properties.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR044

mm-Wave Standing-Wave Accelerating Structures for High-Gradient Tests

3884

E.A. Nanni, M. Dal Forno, V.A. Dolgashev, J. Neilson, S.G. Tantawi
SLAC, Menlo Park, California, USA
S.C. Schaub
MIT, Cambridge, Massachusetts, USA
R.J. Temkin
MIT/PSFC, Cambridge, Massachusetts, USA

We present the design and parameters of single-cell accelerating structures for high-gradient testing at 110 GHz. The purpose of this work is to study the basic physics of ultrahigh vacuum RF breakdown in high-gradient RF accelerators. The accelerating structures consist of pi-mode standing-wave cavities fed with TM01 circular waveguide mode. The geometry and field shape of these accelerating structures is as close as practical to single-cell standing-wave X-band accelerating structures, more than 40 of which were tested at SLAC. This wealth of X-band data will serve as a baseline for these 110 GHz tests. The structures will be powered from a pulsed MW gyrotron oscillator. One MW of RF power from the gyrotron may allow us to reach a peak accelerating gradient of 400 MeV/m.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)