IPAC2016 - List of Authors (Yue, J.H.)

Paper	Title	Page
MOPMB036	Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility	167
	D.C. Zhu, J.S. Cao, Y.F. Sui, J.H. Yue IHEP, Beijing, People's Republic of China J. Chen SINAP, Shanghai, People's Republic of China
	For the third-generation light sources, the vertical emit-tance of a few pico-meter-radians which can be achieved with good coupling correction close to 0.1%, will lead to very small beam size. Several microns vertical beam sizes measurement has presented challenges for diagnostic capability in this region. A few techniques have been developed to make a precise measurement, such as visible light interferometer, x-ray imaging using Fresnel zone plates, compound refractive lenses or pinhole camera. In this paper, an x-ray reflective optics method based on the Kirkpatrick'Baez mirrors will be emphasis on discussed. The K-B mirror system will be installed and tested in SSRF to obtain the vertical beam size close to 20 microns, which is expected to be used for several microns vertical beam size measurement in the future light source named HEPS (High Energy Photon Source) in China.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOR056	Development of a Cw Solid State Amplifier for the Longitudinal Feedback System of Bepcii	2796
	S. An, Z. Bowen PLAI, Nanjing, People's Republic of China J.L. Linling ADS, Jiangsu Province, People's Republic of China J.H. Yue IHEP, Beijing, People's Republic of China L. Zhang Chang'an University, Chang'an, People's Republic of China
	A Solid State Amplifier (SSA) has been developed for testing beam feedback system of the BEPCII of the Institute of High Energy Physics (IHEP), CAS. The output power of the SSA is 100 W with a CW frequency range from 1000 MHz to 1250 MHz. After three generations development, the SSA has become a professional power source. The paper has introduced the development of the SSA and the skills used in the SSA.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility

167

D.C. Zhu, J.S. Cao, Y.F. Sui, J.H. Yue
IHEP, Beijing, People's Republic of China
J. Chen
SINAP, Shanghai, People's Republic of China

For the third-generation light sources, the vertical emit-tance of a few pico-meter-radians which can be achieved with good coupling correction close to 0.1%, will lead to very small beam size. Several microns vertical beam sizes measurement has presented challenges for diagnostic capability in this region. A few techniques have been developed to make a precise measurement, such as visible light interferometer, x-ray imaging using Fresnel zone plates, compound refractive lenses or pinhole camera. In this paper, an x-ray reflective optics method based on the Kirkpatrick'Baez mirrors will be emphasis on discussed. The K-B mirror system will be installed and tested in SSRF to obtain the vertical beam size close to 20 microns, which is expected to be used for several microns vertical beam size measurement in the future light source named HEPS (High Energy Photon Source) in China.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOR056

Development of a Cw Solid State Amplifier for the Longitudinal Feedback System of Bepcii

2796

S. An, Z. Bowen
PLAI, Nanjing, People's Republic of China
J.L. Linling
ADS, Jiangsu Province, People's Republic of China
J.H. Yue
IHEP, Beijing, People's Republic of China
L. Zhang
Chang'an University, Chang'an, People's Republic of China

A Solid State Amplifier (SSA) has been developed for testing beam feedback system of the BEPCII of the Institute of High Energy Physics (IHEP), CAS. The output power of the SSA is 100 W with a CW frequency range from 1000 MHz to 1250 MHz. After three generations development, the SSA has become a professional power source. The paper has introduced the development of the SSA and the skills used in the SSA.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)