IPAC2016 - List of Authors (Wang, P.)

Paper	Title	Page
MOPMR059	Development of S-band High Power Load	383
	X.C. Meng, H.B. Chen, C. Cheng, Y.-C. Du, Q. Gao, J. Shi, P. Wang, Z.F. Xiong TUB, Beijing, People's Republic of China
	Several types of S-band high power loads have been designed, manufactured and tested successfully in Tsinghua University. The high power loads, which work at 2856 MHz for 10 MW~100 MW range, are made of all stainless steel. In this paper, we will present the design, fabrication and the high power test results.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMR060	C-Band Deflecting Cavity for Bunch Length Measurement of 2.5 MeV Electron Beam	386
	J. Jiang, H.B. Chen, J. Shi, P. Wang, L. Zhang, S.X. Zheng TUB, Beijing, People's Republic of China
	The C-band deflecting cavity designed last year is finished. In this paper, the RF measurement of the cavity is introduced. After tuning, it works well at 5.712GHz with a coupling factor degree around 1.05. And we measured the electromagnetic field with bead-pull method. The flatness of the magnetic field is around 0.9, which is not ideal but meet the requirements of the bunch length measurement. And we propose a method of tuning to make sure both frequency and field flatness.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMW022	The RF Design of a Compact, High Power Pulse Compressor with a Flat Output Pulse	3591
SUPSS105	use link to see paper's listing under its alternate paper code
	P. Wang, H.B. Chen, J. Shi TUB, Beijing, People's Republic of China I. Syratchev, W. Wuensch, H. Zha CERN, Geneva, Switzerland
	An X-band, high-power pulse compressor, which can produce a flat pulse and a power gain of 4.3, has been designed. The device is compact, with the dimensions of within 1m, and is designed for CLIC first energy stage based on klystrons. We also discuss about a two stage pulse compressor with power gain of 9.18, which may be a candidate of the X-FEL using CLIC X-band linacs and klystrons with low peak power.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Development of S-band High Power Load

383

X.C. Meng, H.B. Chen, C. Cheng, Y.-C. Du, Q. Gao, J. Shi, P. Wang, Z.F. Xiong
TUB, Beijing, People's Republic of China

Several types of S-band high power loads have been designed, manufactured and tested successfully in Tsinghua University. The high power loads, which work at 2856 MHz for 10 MW~100 MW range, are made of all stainless steel. In this paper, we will present the design, fabrication and the high power test results.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMR060

C-Band Deflecting Cavity for Bunch Length Measurement of 2.5 MeV Electron Beam

386

J. Jiang, H.B. Chen, J. Shi, P. Wang, L. Zhang, S.X. Zheng
TUB, Beijing, People's Republic of China

The C-band deflecting cavity designed last year is finished. In this paper, the RF measurement of the cavity is introduced. After tuning, it works well at 5.712GHz with a coupling factor degree around 1.05. And we measured the electromagnetic field with bead-pull method. The flatness of the magnetic field is around 0.9, which is not ideal but meet the requirements of the bunch length measurement. And we propose a method of tuning to make sure both frequency and field flatness.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMW022

The RF Design of a Compact, High Power Pulse Compressor with a Flat Output Pulse

3591

SUPSS105

use link to see paper's listing under its alternate paper code

P. Wang, H.B. Chen, J. Shi
TUB, Beijing, People's Republic of China
I. Syratchev, W. Wuensch, H. Zha
CERN, Geneva, Switzerland

An X-band, high-power pulse compressor, which can produce a flat pulse and a power gain of 4.3, has been designed. The device is compact, with the dimensions of within 1m, and is designed for CLIC first energy stage based on klystrons. We also discuss about a two stage pulse compressor with power gain of 9.18, which may be a candidate of the X-FEL using CLIC X-band linacs and klystrons with low peak power.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)