IPAC2016 - List of Authors (Sun, C.)

Paper	Title	Page
TUPMB025	Conceptual Design of Storage Ring Magnets for a Diffraction Limited Light Source Upgrade of ALS, ALS-U	1161
	C.A. Swenson, D. Arbelaez, J.-Y. Jung, J.R. Osborn, S. Prestemon, D. Robin, D. Schlueter, C. Steier, C. Sun, E.J. Wallén LBNL, Berkeley, California, USA
	Funding: The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. Lawrence Berkeley National Laboratory (LBNL) has been engaged in an internal laboratory directed research and development project to define a suitable accelerator physics lattice to support the diffraction limited upgrade of the Advanced Light Source. Diffraction limited lattices require strong focusing elements throughout. Magnetics design is challenging in that the high gradient magnetic structures are required to operate in close proximity. Lattice development requires a coordinated engineering design effort to ensure the lattice design feasibility. We will present a review of the results of our magnet scoping studies as well as conceptual design specifications for the ALS-U lattice dipole, quadrupole, and sextupole magnet systems. Additionally we will present a conceptual design of refined super-bend magnets for the ALS-U lattice including a discussion of their potential impact on beam emittance. C. Steier, et al. Progress of the R&D towards a Diffraction Limited Upgrade of the Advanced Light Source, Proceedings of IPAC 2015,
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOW049	Physics Design Progress towards a Diffraction Limited Upgrade of the ALS	2956
	C. Steier, J.M. Byrd, S. De Santis, H. Nishimura, D. Robin, F. Sannibale, C. Sun, M. Venturini, W. Wan LBNL, Berkeley, California, USA
	Funding: This work was supported by the Laboratory Directed Research and Development Program of Lawrence Berkeley National Laboratory under U.S. Department of Energy Contract No. DE-AC02-05CH11231. Improvements in brightness and coherent flux of more than two orders of magnitude are possible using multi bend achromat lattice designs. These improvements can be implemented as upgrades of existing facilities, like the proposed upgrade of the Advanced Light Source. We will describe the progress in the physics design of this upgrade, including lattice evolution, error tolerance studies, simulations of collective effects, and intra beam scattering.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOW050	Optimization of the ALS-U Storage Ring Lattice	2959
	C. Sun, H. Nishimura, D. Robin, F. Sannibale, C. Steier, M. Venturini, W. Wan LBNL, Berkeley, California, USA
	Funding: Work supported by the Director Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231 The Advanced Light Source (ALS) at Lawrence Berkeley National Laboratory is proposing the upgrade of its synchrotron light source to reach soft x-ray diffraction limits within the present ALS footprint. The storage ring lattice design and optimization of this light source is one of the challenging aspects for this proposed upgrade. The candidate upgrade lattice needs not only to fulfill the physics design requirements such as brightness, injection efficiency and beam lifetime, but also to meet engineering constraints such as space limitations, maximum magnet strength as well as beamline port locations. In this paper, we will present the approach that we applied to design and optimize a multi-bend achromat based storage ring lattice for the proposed ALS upgrade.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOW051	R+D Progress Towards a Diffraction Limited Upgrade of the ALS	2962
	C. Steier, A. Anders, J.M. Byrd, K. Chow, S. De Santis, R.M. Duarte, J.-Y. Jung, T.H. Luo, H. Nishimura, T. Oliver, J.R. Osborn, H.A. Padmore, G.C. Pappas, D. Robin, F. Sannibale, D. Schlueter, C. Sun, C.A. Swenson, M. Venturini, W.L. Waldron, E.J. Wallén, W. Wan, Y. Yang LBNL, Berkeley, California, USA
	Funding: This work was supported by the Laboratory Directed Research and Development Program of Lawrence Berkeley National Laboratory under U.S. Department of Energy Contract No. DE-AC02-05CH11231. Improvements in brightness and coherent flux of about two orders of magnitude over operational storage ring based light sources are possible using multi bend achromat lattice designs. These improvements can be implemented as upgrades of existing facilities, like the proposed upgrade of the Advanced Light Source, making use of the existing infrastructure, thereby reducing cost and time needed to reach full scientific productivity on a large number of beamlines. An R&D program was started at LBNL to further develop the technologies necessary for diffraction-limited storage rings. It involves many areas, and focuses on the specific needs of soft x-ray facilities: NEG coating of small chambers, swap-out injection, bunch lengthening, magnets/radiation production, x-ray optics, and beam physics design optimization. Hardware prototypes have been built and concepts and equipment was tested in beam tests on the existing ALS.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Conceptual Design of Storage Ring Magnets for a Diffraction Limited Light Source Upgrade of ALS, ALS-U

1161

C.A. Swenson, D. Arbelaez, J.-Y. Jung, J.R. Osborn, S. Prestemon, D. Robin, D. Schlueter, C. Steier, C. Sun, E.J. Wallén
LBNL, Berkeley, California, USA

Funding: The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
Lawrence Berkeley National Laboratory (LBNL) has been engaged in an internal laboratory directed research and development project to define a suitable accelerator physics lattice to support the diffraction limited upgrade of the Advanced Light Source*. Diffraction limited lattices require strong focusing elements throughout. Magnetics design is challenging in that the high gradient magnetic structures are required to operate in close proximity. Lattice development requires a coordinated engineering design effort to ensure the lattice design feasibility. We will present a review of the results of our magnet scoping studies as well as conceptual design specifications for the ALS-U lattice dipole, quadrupole, and sextupole magnet systems. Additionally we will present a conceptual design of refined super-bend magnets for the ALS-U lattice including a discussion of their potential impact on beam emittance.
* C. Steier, et al. Progress of the R&D towards a Diffraction Limited Upgrade of the Advanced Light Source, Proceedings of IPAC 2015,

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOW049

Physics Design Progress towards a Diffraction Limited Upgrade of the ALS

2956

C. Steier, J.M. Byrd, S. De Santis, H. Nishimura, D. Robin, F. Sannibale, C. Sun, M. Venturini, W. Wan
LBNL, Berkeley, California, USA

Funding: This work was supported by the Laboratory Directed Research and Development Program of Lawrence Berkeley National Laboratory under U.S. Department of Energy Contract No. DE-AC02-05CH11231.
Improvements in brightness and coherent flux of more than two orders of magnitude are possible using multi bend achromat lattice designs. These improvements can be implemented as upgrades of existing facilities, like the proposed upgrade of the Advanced Light Source. We will describe the progress in the physics design of this upgrade, including lattice evolution, error tolerance studies, simulations of collective effects, and intra beam scattering.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOW050

Optimization of the ALS-U Storage Ring Lattice

2959

C. Sun, H. Nishimura, D. Robin, F. Sannibale, C. Steier, M. Venturini, W. Wan
LBNL, Berkeley, California, USA

Funding: Work supported by the Director Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231
The Advanced Light Source (ALS) at Lawrence Berkeley National Laboratory is proposing the upgrade of its synchrotron light source to reach soft x-ray diffraction limits within the present ALS footprint. The storage ring lattice design and optimization of this light source is one of the challenging aspects for this proposed upgrade. The candidate upgrade lattice needs not only to fulfill the physics design requirements such as brightness, injection efficiency and beam lifetime, but also to meet engineering constraints such as space limitations, maximum magnet strength as well as beamline port locations. In this paper, we will present the approach that we applied to design and optimize a multi-bend achromat based storage ring lattice for the proposed ALS upgrade.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOW051

R+D Progress Towards a Diffraction Limited Upgrade of the ALS

2962

C. Steier, A. Anders, J.M. Byrd, K. Chow, S. De Santis, R.M. Duarte, J.-Y. Jung, T.H. Luo, H. Nishimura, T. Oliver, J.R. Osborn, H.A. Padmore, G.C. Pappas, D. Robin, F. Sannibale, D. Schlueter, C. Sun, C.A. Swenson, M. Venturini, W.L. Waldron, E.J. Wallén, W. Wan, Y. Yang
LBNL, Berkeley, California, USA

Funding: This work was supported by the Laboratory Directed Research and Development Program of Lawrence Berkeley National Laboratory under U.S. Department of Energy Contract No. DE-AC02-05CH11231.
Improvements in brightness and coherent flux of about two orders of magnitude over operational storage ring based light sources are possible using multi bend achromat lattice designs. These improvements can be implemented as upgrades of existing facilities, like the proposed upgrade of the Advanced Light Source, making use of the existing infrastructure, thereby reducing cost and time needed to reach full scientific productivity on a large number of beamlines. An R&D program was started at LBNL to further develop the technologies necessary for diffraction-limited storage rings. It involves many areas, and focuses on the specific needs of soft x-ray facilities: NEG coating of small chambers, swap-out injection, bunch lengthening, magnets/radiation production, x-ray optics, and beam physics design optimization. Hardware prototypes have been built and concepts and equipment was tested in beam tests on the existing ALS.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)