IPAC2016 - List of Authors (Schlarb, H.)

Paper	Title	Page
MOPMB015	Technical Design Considerations About the SINBAD-ARES Linac	112
	B. Marchetti, R.W. Aßmann, U. Dorda, K. Flöttmann, M. Hachmann, I. Hartl, J. Herrmann, M. Hüning, G. Kube, F. Ludwig, F. Mayet, M. Pelzer, I. Peperkorn, S. Pfeiffer, H. Schlarb, M. Titberidze, G. Vashchenko, M.K. Weikum, L. Winkelmann, K. Wittenburg, J. Zhu DESY, Hamburg, Germany R. Rossmanith KIT, Karlsruhe, Germany
	The SINBAD facility (Short and INnovative Bunches and Accelerators at Desy) is foreseen to host various experiments in the field of production of ultra-short electron bunches and novel high gradient acceleration technique. The SINBAD linac, also called ARES (Accelerator Research experiment at SINBAD), will be a conventional S-band linear RF accelerator allowing the production of low charge (0.5 pC - few pC) ultra-short electron bunches (FWHM, length <= 1 fs - few fs) having 100 MeV energy. In this paper we present the current status of the technical design considerations, motivate the foreseen diagnostics for the RF gun commissioning and present examples of foreseen applications.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW003	Thermal Simulation of an Energy Feedback Normal Conducting RF Cavity	396
	M. Fakhari, K. Flöttmann, S. Pfeiffer, H. Schlarb DESY, Hamburg, Germany J. Roßbach University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany A. Yahaghi CFEL, Hamburg, Germany
	Thermal simulation has been performed for an energy feedback normal conducting RF cavity. The cavity is going to be used as a fast actuator to regulate the arrival time of the electron bunches in fs level in FLASH. By measuring the arrival time jitter of one bunch in a bunch train, the designed cavity apply a correcting accelerating or decelerating voltage to the next bunches. The input power of the cavity is provided by a solid state amplifier and will be coupled to the cavity via a loop on the body. To achieve the fs level precision of the arrival time, the cavity should be able to provide accurate accelerating voltage with a precision of 300 eV. We performed thermal simulation to find out the temperature distribution of the cavity and make sure that heating will not affect its voltage precision. The simulation results show that by using two input loops the coupling constant will vary from 4.11 to 4.13 during the operation of the cavity which effect on the bunchs' arrival time would be less than 0.25 fs. While using just one input loop can lead to an error of about 1 fs.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOW011	Operation of Free Electron Laser FLASH Driven by Short Electron Pulses	732
	V. Balandin, G. Brenner, C. Gerth, N. Golubeva, U. Mavrič, H. Schlarb, E. Schneidmiller, S. Schreiber, B. Steffen, M. Yan, M.V. Yurkov DESY, Hamburg, Germany E. Hass, A. Kuhl, T. Plath, M. Rehders, J. Rönsch-Schulenburg, J. Roßbach University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
	The program of low charge mode of operation is under development at free electron laser FLASH aiming in single mode radiation pulses. A short pulse photoinjector laser has been installed at FLASH allowing production of ultrashort electron pluses with moderate compression factor of the beam formation system. Here we present pilot results of free electron laser FLASH operating at the wavelength of 13.1 nm and driven by 70 pC electron bunches. Relevant theoretical analysis has been performed showing good agreement with experimental results.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOR060	MTCA.4-based Beam Line Stabilization Application	2808
	K.P. Przygoda TUL-DMCS, Łódź, Poland C. Gerth, H. Schlarb, B. Steffen DESY, Hamburg, Germany
	We want to summarize the beam line stabilization application with MTCA.4 electronics. Presented solution is based on the compact 2U MTCA.4 crate integrating sensor and actuator cards. The optical beam position sensor is based on quadrupole SI PIN photodiode connected to low cost AMC based FMC carrier equipped with ADC card. The optical beam position correction is done using picomotorized stages equipped with active piezo elements and high voltage RTM piezo driver. The data processing and digital feedback units are implemented using Spartan 6 FPGA. The control algorithm has been optimized for low latency and high precision computations. The control electronics performance has been tested using single beam line test stand consisted of commercial laser diode drivers, supported optics and motorized stages. The first results are demonstrated and future possible applications are briefly discussed.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAA03	MicroTCA.4 based Single Cavity Regulation including Piezo Controls	3152
	K.P. Przygoda, H. Schlarb, Ch. Schmidt DESY, Hamburg, Germany P. Echevarria HZB, Berlin, Germany R. Rybaniec Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland
	We want to summarize the single cavity regulation with MTCA.4 electronics. Presented solution is based on the one MTCA.4 crate integrating both RF field control and piezo tuner control systems. The RF field control electronics consists of RTM for cavity probes sensing and high voltage power source driving, AMC for fast data processing and digital feedback operation. The piezo control system has been setup with high voltage RTM Piezo driver and low cost AMC based FMC carrier. The communication between both control systems is performed using low latency link over the AMC backplane with data throughput up to the 3.125 Gbps. First results from CW operation of the RF field controller and the cavity active resonance control with the piezo tuners are demonstrated and briefly discussed.
	Slides THOAA03 [2.693 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Technical Design Considerations About the SINBAD-ARES Linac

112

B. Marchetti, R.W. Aßmann, U. Dorda, K. Flöttmann, M. Hachmann, I. Hartl, J. Herrmann, M. Hüning, G. Kube, F. Ludwig, F. Mayet, M. Pelzer, I. Peperkorn, S. Pfeiffer, H. Schlarb, M. Titberidze, G. Vashchenko, M.K. Weikum, L. Winkelmann, K. Wittenburg, J. Zhu
DESY, Hamburg, Germany
R. Rossmanith
KIT, Karlsruhe, Germany

The SINBAD facility (Short and INnovative Bunches and Accelerators at Desy) is foreseen to host various experiments in the field of production of ultra-short electron bunches and novel high gradient acceleration technique. The SINBAD linac, also called ARES (Accelerator Research experiment at SINBAD), will be a conventional S-band linear RF accelerator allowing the production of low charge (0.5 pC - few pC) ultra-short electron bunches (FWHM, length <= 1 fs - few fs) having 100 MeV energy. In this paper we present the current status of the technical design considerations, motivate the foreseen diagnostics for the RF gun commissioning and present examples of foreseen applications.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW003

Thermal Simulation of an Energy Feedback Normal Conducting RF Cavity

396

M. Fakhari, K. Flöttmann, S. Pfeiffer, H. Schlarb
DESY, Hamburg, Germany
J. Roßbach
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
A. Yahaghi
CFEL, Hamburg, Germany

Thermal simulation has been performed for an energy feedback normal conducting RF cavity. The cavity is going to be used as a fast actuator to regulate the arrival time of the electron bunches in fs level in FLASH. By measuring the arrival time jitter of one bunch in a bunch train, the designed cavity apply a correcting accelerating or decelerating voltage to the next bunches. The input power of the cavity is provided by a solid state amplifier and will be coupled to the cavity via a loop on the body. To achieve the fs level precision of the arrival time, the cavity should be able to provide accurate accelerating voltage with a precision of 300 eV. We performed thermal simulation to find out the temperature distribution of the cavity and make sure that heating will not affect its voltage precision. The simulation results show that by using two input loops the coupling constant will vary from 4.11 to 4.13 during the operation of the cavity which effect on the bunchs' arrival time would be less than 0.25 fs. While using just one input loop can lead to an error of about 1 fs.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOW011

Operation of Free Electron Laser FLASH Driven by Short Electron Pulses

732

V. Balandin, G. Brenner, C. Gerth, N. Golubeva, U. Mavrič, H. Schlarb, E. Schneidmiller, S. Schreiber, B. Steffen, M. Yan, M.V. Yurkov
DESY, Hamburg, Germany
E. Hass, A. Kuhl, T. Plath, M. Rehders, J. Rönsch-Schulenburg, J. Roßbach
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany

The program of low charge mode of operation is under development at free electron laser FLASH aiming in single mode radiation pulses. A short pulse photoinjector laser has been installed at FLASH allowing production of ultrashort electron pluses with moderate compression factor of the beam formation system. Here we present pilot results of free electron laser FLASH operating at the wavelength of 13.1 nm and driven by 70 pC electron bunches. Relevant theoretical analysis has been performed showing good agreement with experimental results.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOR060

MTCA.4-based Beam Line Stabilization Application

2808

K.P. Przygoda
TUL-DMCS, Łódź, Poland
C. Gerth, H. Schlarb, B. Steffen
DESY, Hamburg, Germany

We want to summarize the beam line stabilization application with MTCA.4 electronics. Presented solution is based on the compact 2U MTCA.4 crate integrating sensor and actuator cards. The optical beam position sensor is based on quadrupole SI PIN photodiode connected to low cost AMC based FMC carrier equipped with ADC card. The optical beam position correction is done using picomotorized stages equipped with active piezo elements and high voltage RTM piezo driver. The data processing and digital feedback units are implemented using Spartan 6 FPGA. The control algorithm has been optimized for low latency and high precision computations. The control electronics performance has been tested using single beam line test stand consisted of commercial laser diode drivers, supported optics and motorized stages. The first results are demonstrated and future possible applications are briefly discussed.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAA03

MicroTCA.4 based Single Cavity Regulation including Piezo Controls

3152

K.P. Przygoda, H. Schlarb, Ch. Schmidt
DESY, Hamburg, Germany
P. Echevarria
HZB, Berlin, Germany
R. Rybaniec
Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland

We want to summarize the single cavity regulation with MTCA.4 electronics. Presented solution is based on the one MTCA.4 crate integrating both RF field control and piezo tuner control systems. The RF field control electronics consists of RTM for cavity probes sensing and high voltage power source driving, AMC for fast data processing and digital feedback operation. The piezo control system has been setup with high voltage RTM Piezo driver and low cost AMC based FMC carrier. The communication between both control systems is performed using low latency link over the AMC backplane with data throughput up to the 3.125 Gbps. First results from CW operation of the RF field controller and the cavity active resonance control with the piezo tuners are demonstrated and briefly discussed.

Slides THOAA03 [2.693 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)