IPAC2016 - List of Authors (Rossetti Conti, M.)

Paper	Title	Page
MOPMB019	Quadrupole Scan Emittance Measurements for the ELI-NP Compton Gamma Source	126
	A.R. Rossi, A. Bacci, L. Serafini Istituto Nazionale di Fisica Nucleare, Milano, Italy E. Chiadroni, C. Vaccarezza, A. Variola INFN/LNF, Frascati (Roma), Italy A. Cianchi Università di Roma II Tor Vergata, Roma, Italy C. Curatolo, I. Drebot Universita' degli Studi di Milano e INFN, Milano, Italy A. Giribono, A. Mostacci University of Rome La Sapienza, Rome, Italy V. Petrillo, M. Rossetti Conti Universita' degli Studi di Milano & INFN, Milano, Italy
	The high brightness electron LINAC of the Compton Gamma Source at the ELI Nuclear Physics facility in Romania is accelerating a train of 32 bunches with a nominal charge of 250 pC and nominal spacing of 16 ns. To achieve the design gamma flux, all the bunches along the train must have the designed Twiss parameters. Beam sizes are measured with optical transition radiation monitors, allowing a quadrupole scan for Twiss parameters measurements. Since focusing the whole bunch train on the screen may lead to permanent screen damage, we investigated non-conventional scans such as scans around a maximum of the beam size or scans with a controlled minimum spot size. This paper discusses the implementation issues of such a technique in the actual machine layout.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOW004	Status of the STAR Project	1747
	A. Bacci, I. Drebot, L. Serafini, V. Torri Istituto Nazionale di Fisica Nucleare, Milano, Italy R.G. Agostino, R. Barberis, M. Ghedini, F. Martire, C. Pace UNICAL, Arcavacata di Rende, Italy D. Alesini, M. Bellaveglia, J.J. Beltrano, F.G. Bisesto, G. Borgese, B. Buonomo, G. Di Pirro, G. Di Raddo, A. Esposito, A. Gallo, A. Ghigo, F. Iungo, L. Pellegrino, A. Stella, C. Vaccarezza INFN/LNF, Frascati (Roma), Italy A. Cianchi INFN-Roma II, Roma, Italy G. D'Auria, A. Fabris, M. Marazzi Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy V. Petrillo Universita' degli Studi di Milano, Milano, Italy E. Puppin Politecnico/Milano, Milano, Italy M. Rossetti Conti Universita' degli Studi di Milano & INFN, Milano, Italy
	This paper reports on the final design and the work in progress on the STAR project (IPAC2014:WEPRO115), which is under construction at the Univ. of Calabria (Italy). The project is devoted to the construction of an advanced Thomson source of monochromatic tunable, ps-long, polarized X-ray beams, ranging from 40 up to 140 KeV . At present the buildings and main plants have been completed as the acquisition of main components: the RF photo-injector, the accelerating section, laser systems for collision and photo-cathode, RF Power Source and magnets are ready to start installation and site acceptance tests. The design of laser lines is complete and simulated by ZEMAX, aiming to minimize energy losses, optical distortions and providing a tunable experimental setup as well. The RF power network is close to be tested, it's based on a 55MW (2.5us pulse) S-band Klystron driven by a 500kV Pulse Forming Network based modulator and a Low Level RF system, running at 100 Hz. The Control System is been designed using EPICS and allows to manage easily and fastly each machine parameter. We expect to start commissioning the machine by the end of 2016 and obtain the first collisions within the first part of 2017.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY039	GIOTTO: A Genetic Code for Demanding Beam-dynamics Optimizations	3073
	A. Bacci Istituto Nazionale di Fisica Nucleare, Milano, Italy V. Petrillo Universita' degli Studi di Milano, Milano, Italy M. Rossetti Conti Universita' degli Studi di Milano & INFN, Milano, Italy
	GIOTTO is a software based on a Genetic Algorithm (GA). Its development started in 2007 with a work published on NIMB (263, 2007, 488-496) and presented at PAC07 (THPAN031). When the parameters, defining an acceleration machine beam line, are strongly correlated in nonlinear way, the GAs are a powerful tool to coup with these difficulties. These conditions are typically generated by space-charge, as in the high brightness e-beam photo-injectors or when the Velocity Bunching compression technique (VB) is used. The power of GIOTTO is the adaptability to different cases, given by its own structure that permits to drive different external codes in series, the possibility to define a user dependent multi objective fitness function and function constraints on the beam dynamics, as well as the possibility to turn off the genetic optimization to perform statistical analysis (machine jitters). Up today it has been used in Thomson/Compton sources, ultra-short e-bunches generation by VB, focusing channel and dog-leg lines optimizations.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB011	Beam Based Alignment Methods for Cavities and Solenoids in Photo-Injectors	3247
	M. Rossetti Conti Universita' degli Studi di Milano & INFN, Milano, Italy A. Bacci Istituto Nazionale di Fisica Nucleare, Milano, Italy
	Solenoids are often used as lens-like beam focusing elements in electron linacs, especially in the low energy beam lines aside the Gun solenoid for emittance compensation, a common element of high brightness photo-injectors. There are also many electron linacs worldwide which use the Velocity Bunching beam compression technique, which needs solenoids wrapping the first acceleration cavity. A misalignment between the beam trajectory and the magnetic center of the solenoids produces a decrease in the beam quality and makes it necessary to find a complex steering setting to force the beam on a good orbit. In this proceeding we present a study of two beam based alignment techniques, which are correlated: the first shows a method to find the correct electromagnetic axis of an acceleration cavity, the second shows how to align the solenoids (wrapping the cavity) on this axis. Therefore the study permits to find the best steering setting and the solenoids positions corrections which have to be done. The work is based on real data acquired on the SPARC linac and on a virtual experiment.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Quadrupole Scan Emittance Measurements for the ELI-NP Compton Gamma Source

126

A.R. Rossi, A. Bacci, L. Serafini
Istituto Nazionale di Fisica Nucleare, Milano, Italy
E. Chiadroni, C. Vaccarezza, A. Variola
INFN/LNF, Frascati (Roma), Italy
A. Cianchi
Università di Roma II Tor Vergata, Roma, Italy
C. Curatolo, I. Drebot
Universita' degli Studi di Milano e INFN, Milano, Italy
A. Giribono, A. Mostacci
University of Rome La Sapienza, Rome, Italy
V. Petrillo, M. Rossetti Conti
Universita' degli Studi di Milano & INFN, Milano, Italy

The high brightness electron LINAC of the Compton Gamma Source at the ELI Nuclear Physics facility in Romania is accelerating a train of 32 bunches with a nominal charge of 250 pC and nominal spacing of 16 ns. To achieve the design gamma flux, all the bunches along the train must have the designed Twiss parameters. Beam sizes are measured with optical transition radiation monitors, allowing a quadrupole scan for Twiss parameters measurements. Since focusing the whole bunch train on the screen may lead to permanent screen damage, we investigated non-conventional scans such as scans around a maximum of the beam size or scans with a controlled minimum spot size. This paper discusses the implementation issues of such a technique in the actual machine layout.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOW004

Status of the STAR Project

1747

A. Bacci, I. Drebot, L. Serafini, V. Torri
Istituto Nazionale di Fisica Nucleare, Milano, Italy
R.G. Agostino, R. Barberis, M. Ghedini, F. Martire, C. Pace
UNICAL, Arcavacata di Rende, Italy
D. Alesini, M. Bellaveglia, J.J. Beltrano, F.G. Bisesto, G. Borgese, B. Buonomo, G. Di Pirro, G. Di Raddo, A. Esposito, A. Gallo, A. Ghigo, F. Iungo, L. Pellegrino, A. Stella, C. Vaccarezza
INFN/LNF, Frascati (Roma), Italy
A. Cianchi
INFN-Roma II, Roma, Italy
G. D'Auria, A. Fabris, M. Marazzi
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
V. Petrillo
Universita' degli Studi di Milano, Milano, Italy
E. Puppin
Politecnico/Milano, Milano, Italy
M. Rossetti Conti
Universita' degli Studi di Milano & INFN, Milano, Italy

This paper reports on the final design and the work in progress on the STAR project (IPAC2014:WEPRO115), which is under construction at the Univ. of Calabria (Italy). The project is devoted to the construction of an advanced Thomson source of monochromatic tunable, ps-long, polarized X-ray beams, ranging from 40 up to 140 KeV . At present the buildings and main plants have been completed as the acquisition of main components: the RF photo-injector, the accelerating section, laser systems for collision and photo-cathode, RF Power Source and magnets are ready to start installation and site acceptance tests. The design of laser lines is complete and simulated by ZEMAX, aiming to minimize energy losses, optical distortions and providing a tunable experimental setup as well. The RF power network is close to be tested, it's based on a 55MW (2.5us pulse) S-band Klystron driven by a 500kV Pulse Forming Network based modulator and a Low Level RF system, running at 100 Hz. The Control System is been designed using EPICS and allows to manage easily and fastly each machine parameter. We expect to start commissioning the machine by the end of 2016 and obtain the first collisions within the first part of 2017.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY039

GIOTTO: A Genetic Code for Demanding Beam-dynamics Optimizations

3073

A. Bacci
Istituto Nazionale di Fisica Nucleare, Milano, Italy
V. Petrillo
Universita' degli Studi di Milano, Milano, Italy
M. Rossetti Conti
Universita' degli Studi di Milano & INFN, Milano, Italy

GIOTTO is a software based on a Genetic Algorithm (GA). Its development started in 2007 with a work published on NIMB (263, 2007, 488-496) and presented at PAC07 (THPAN031). When the parameters, defining an acceleration machine beam line, are strongly correlated in nonlinear way, the GAs are a powerful tool to coup with these difficulties. These conditions are typically generated by space-charge, as in the high brightness e-beam photo-injectors or when the Velocity Bunching compression technique (VB) is used. The power of GIOTTO is the adaptability to different cases, given by its own structure that permits to drive different external codes in series, the possibility to define a user dependent multi objective fitness function and function constraints on the beam dynamics, as well as the possibility to turn off the genetic optimization to perform statistical analysis (machine jitters). Up today it has been used in Thomson/Compton sources, ultra-short e-bunches generation by VB, focusing channel and dog-leg lines optimizations.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB011

Beam Based Alignment Methods for Cavities and Solenoids in Photo-Injectors

3247

M. Rossetti Conti
Universita' degli Studi di Milano & INFN, Milano, Italy
A. Bacci
Istituto Nazionale di Fisica Nucleare, Milano, Italy

Solenoids are often used as lens-like beam focusing elements in electron linacs, especially in the low energy beam lines aside the Gun solenoid for emittance compensation, a common element of high brightness photo-injectors. There are also many electron linacs worldwide which use the Velocity Bunching beam compression technique, which needs solenoids wrapping the first acceleration cavity. A misalignment between the beam trajectory and the magnetic center of the solenoids produces a decrease in the beam quality and makes it necessary to find a complex steering setting to force the beam on a good orbit. In this proceeding we present a study of two beam based alignment techniques, which are correlated: the first shows a method to find the correct electromagnetic axis of an acceleration cavity, the second shows how to align the solenoids (wrapping the cavity) on this axis. Therefore the study permits to find the best steering setting and the solenoids positions corrections which have to be done. The work is based on real data acquired on the SPARC linac and on a virtual experiment.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)