IPAC2016 - List of Authors (Rogovsky, Yu. A.)

Paper	Title	Page
MOPMR014	Beam Diagnostics Overview for Collector Ring at FAIR	255
	Yu. A. Rogovsky, E.A. Bekhtenev, M.I. Bryzgunov, O.I. Meshkov, D.B. Shwartz BINP SB RAS, Novosibirsk, Russia E.A. Bekhtenev, Yu. A. Rogovsky, D.B. Shwartz NSU, Novosibirsk, Russia O. Chorniy GSI, Darmstadt, Germany
	The Collector Ring (CR) is a dedicated storage ring in the FAIR project, where the main emphasis is laid on the effective stochastic precooling of intense secondary beams of stable ions, rare isotopes or antiprotons. A complex operation scheme with several types of operational cycles with beams in CR starting from injection, RF gymnastics, stochastic cooling then, and finishing to extraction is foreseen. Beam parameters changes significantly during the cycles. This demands an exceptional high dynamic range for the beam instrumentation. Non-destructive methods are mandatory for high currents as well as for the low current secondary beams due to the low repetition rate. Precise measurements of all beam parameters and automatic steering with short response time are required due to the necessary exploitation of the full ring acceptances. An overview of the challenges and solutions for various diagnostic installations will be given.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR018	Comissioning of Upgraded VEPP-2000 Injection Chain	3811
	D.E. Berkaev, A.V. Andrianov, K.V. Astrelina, V.V. Balakin, A.M. Barnyakov, O.V. Belikov, M.F. Blinov, D.V. Bochek, D. Bolkhovityanov, F.A. Emanov, A.R. Frolov, K. Gorchakov, Ye.A. Gusev, A.S. Kasaev, E. Kenzhbulatov, I. Koop, I.E. Korenev, G.Y. Kurkin, N.N. Lebedev, A.E. Levichev, P.V. Logatchov, A.P. Lysenko, D.A. Nikiforov, V.P. Prosvetov, Yu. A. Rogovsky, S.L. Samoylov, A.I. Senchenko, P.Yu. Shatunov, Y.M. Shatunov, D.B. Shwartz, A.A. Starostenko, I.M. Zemlyansky, Yu.M. Zharinov BINP SB RAS, Novosibirsk, Russia F.A. Emanov, Yu. A. Rogovsky, A.I. Senchenko, A.A. Starostenko NSU, Novosibirsk, Russia
	The upgrade of VEPP-2000 e⁺e⁻ collider injection chain includes the connection to BINP Injection Complex (IC) via newly constructed transfer line K-500 as well as upgrade of the booster synchrotron BEP to the energy of 1 GeV. Modernization has started in the middle of 2013 and now the electron and positron beams with highly increased production rate together with top-up injection from BEP are ready to feed VEPP-2000 ring and provide design luminosity at the whole energy range limited only by beam-beam effects. The design and operation experience of IC damping ring, 250 m transfer channel and booster BEP dealing with 2.6 T magnets at top energy will be presented.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMB017	The Injection Septum Magnet for the Collector Ring (FAIR)	1145
	P.Yu. Shatunov, D.E. Berkaev, I. Koop, E.P. Semenov, D.B. Shwartz BINP SB RAS, Novosibirsk, Russia A. Dolinskyy, S.A. Litvinov GSI, Darmstadt, Germany Yu. A. Rogovsky Budker INP & NSU, Novosibirsk, Russia
	Collector Ring is one of the key installations of the FAIR project (Darmstadt, Germany). It is dedicated for stochastic cooling of incoming beams of antiprotons and rare ions. Additionally there is a mode of operation for experiments in the ring. Beams for all modes of operation are injected through one transfer channel. Extremely high acceptance of the ring (240 mm*mrad) leads to large apertures of all magnetic elements including the septum magnet. Meanwhile planned parameters of the magnetic field and magnetic field quality are comparatively strict. The present state of the design of the pulsed injection septum for the CR is presented in this article together with the concept of the injection system.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB002	Beam Dynamics and Closed Orbit Correction at the Collector Ring	3216
	O.E. Gorda, A. Dolinskyy, O.A. Kovalenko GSI, Darmstadt, Germany I. Koop, D.B. Shwartz BINP SB RAS, Novosibirsk, Russia Yu. A. Rogovsky Budker INP & NSU, Novosibirsk, Russia
	The Collector Ring (CR) has been designed for fast cooling of hot antiproton or ion beams at FAIR. Its ion-optical layout and system design has been recently finalized after careful optimizations aiming at improvement of the beam parameters and machine performance. In this paper we present the simulations of the transverse beam dynamics for the different ion-optical modes of the CR. Particle tracking calculations have been performed to evaluate an influence of the magnet imperfections on the dynamic aperture. The analysis and correction of the closed orbit distortions due to the magnet misalignments is also discussed.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Diagnostics Overview for Collector Ring at FAIR

255

Yu. A. Rogovsky, E.A. Bekhtenev, M.I. Bryzgunov, O.I. Meshkov, D.B. Shwartz
BINP SB RAS, Novosibirsk, Russia
E.A. Bekhtenev, Yu. A. Rogovsky, D.B. Shwartz
NSU, Novosibirsk, Russia
O. Chorniy
GSI, Darmstadt, Germany

The Collector Ring (CR) is a dedicated storage ring in the FAIR project, where the main emphasis is laid on the effective stochastic precooling of intense secondary beams of stable ions, rare isotopes or antiprotons. A complex operation scheme with several types of operational cycles with beams in CR starting from injection, RF gymnastics, stochastic cooling then, and finishing to extraction is foreseen. Beam parameters changes significantly during the cycles. This demands an exceptional high dynamic range for the beam instrumentation. Non-destructive methods are mandatory for high currents as well as for the low current secondary beams due to the low repetition rate. Precise measurements of all beam parameters and automatic steering with short response time are required due to the necessary exploitation of the full ring acceptances. An overview of the challenges and solutions for various diagnostic installations will be given.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR018

Comissioning of Upgraded VEPP-2000 Injection Chain

3811

D.E. Berkaev, A.V. Andrianov, K.V. Astrelina, V.V. Balakin, A.M. Barnyakov, O.V. Belikov, M.F. Blinov, D.V. Bochek, D. Bolkhovityanov, F.A. Emanov, A.R. Frolov, K. Gorchakov, Ye.A. Gusev, A.S. Kasaev, E. Kenzhbulatov, I. Koop, I.E. Korenev, G.Y. Kurkin, N.N. Lebedev, A.E. Levichev, P.V. Logatchov, A.P. Lysenko, D.A. Nikiforov, V.P. Prosvetov, Yu. A. Rogovsky, S.L. Samoylov, A.I. Senchenko, P.Yu. Shatunov, Y.M. Shatunov, D.B. Shwartz, A.A. Starostenko, I.M. Zemlyansky, Yu.M. Zharinov
BINP SB RAS, Novosibirsk, Russia
F.A. Emanov, Yu. A. Rogovsky, A.I. Senchenko, A.A. Starostenko
NSU, Novosibirsk, Russia

The upgrade of VEPP-2000 e⁺e⁻ collider injection chain includes the connection to BINP Injection Complex (IC) via newly constructed transfer line K-500 as well as upgrade of the booster synchrotron BEP to the energy of 1 GeV. Modernization has started in the middle of 2013 and now the electron and positron beams with highly increased production rate together with top-up injection from BEP are ready to feed VEPP-2000 ring and provide design luminosity at the whole energy range limited only by beam-beam effects. The design and operation experience of IC damping ring, 250 m transfer channel and booster BEP dealing with 2.6 T magnets at top energy will be presented.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMB017

The Injection Septum Magnet for the Collector Ring (FAIR)

1145

P.Yu. Shatunov, D.E. Berkaev, I. Koop, E.P. Semenov, D.B. Shwartz
BINP SB RAS, Novosibirsk, Russia
A. Dolinskyy, S.A. Litvinov
GSI, Darmstadt, Germany
Yu. A. Rogovsky
Budker INP & NSU, Novosibirsk, Russia

Collector Ring is one of the key installations of the FAIR project (Darmstadt, Germany). It is dedicated for stochastic cooling of incoming beams of antiprotons and rare ions. Additionally there is a mode of operation for experiments in the ring. Beams for all modes of operation are injected through one transfer channel. Extremely high acceptance of the ring (240 mm*mrad) leads to large apertures of all magnetic elements including the septum magnet. Meanwhile planned parameters of the magnetic field and magnetic field quality are comparatively strict. The present state of the design of the pulsed injection septum for the CR is presented in this article together with the concept of the injection system.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB002

Beam Dynamics and Closed Orbit Correction at the Collector Ring

3216

O.E. Gorda, A. Dolinskyy, O.A. Kovalenko
GSI, Darmstadt, Germany
I. Koop, D.B. Shwartz
BINP SB RAS, Novosibirsk, Russia
Yu. A. Rogovsky
Budker INP & NSU, Novosibirsk, Russia

The Collector Ring (CR) has been designed for fast cooling of hot antiproton or ion beams at FAIR. Its ion-optical layout and system design has been recently finalized after careful optimizations aiming at improvement of the beam parameters and machine performance. In this paper we present the simulations of the transverse beam dynamics for the different ion-optical modes of the CR. Particle tracking calculations have been performed to evaluate an influence of the magnet imperfections on the dynamic aperture. The analysis and correction of the closed orbit distortions due to the magnet misalignments is also discussed.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)