IPAC2016 - List of Authors (Ovchinnikova, L.)

Paper	Title	Page
MOPMW023	Optimization of the RF Cavity of a Low-energy Storage Ring for Thomson Scattering X-Ray Source	438
SUPSS090	use link to see paper's listing under its alternate paper code
	L. Ovchinnikova, V.I. Shvedunov SINP MSU, Moscow, Russia A. Ryabov IHEP, Moscow Region, Russia V.I. Shvedunov LEA MSU, Moscow, Russia
	Results of optimization of the RF cavity of a low-energy storage ring for Thomson scattering X-ray source are presented. The geometry of 714 MHz RF cavity was optimized to provide maximum shunt impedance taking into account position of higher order modes (HOMs). The number and position of cooling channels were adjusted to minimize frequency shift due to cavity thermal deformations. The waveguide coupler and frequency tuner were calculated. Special attention was paid to detailed calculations of the HOMs parameter and to study of methods to minimize their influence on the storage ring beam dynamics.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB035	A Comparative Study of Low Energy Compact Storage Rings for a Thomson Scattering X-ray Source	3308
	L. Ovchinnikova, V.I. Shvedunov SINP MSU, Moscow, Russia E.G. Bessonov, M.V. Gorbunkov LPI, Moscow, Russia A.A. Mikhailichenko Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA V.I. Shvedunov LEA MSU, Moscow, Russia
	A low-energy (<50 MeV) compact storage ring is a basic component of an X-ray source with high average flux based on Thomson scattering. Such ring provides electron bunches with ~1 nC charge and repetition rate up to 100 MHz for interaction with intense laser pulses. Such ring should provide a small (tens of microns rms) beam radius at interaction point, must have large dynamic aperture, sufficient space for allocation of different elements, such as laser resonator, RF cavity, fast beam injection/extraction systems, beam pick-ups and correctors. In this report, we present the results of comparative study of four versions of storage ring with different structure of lattices.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOPMW023

Optimization of the RF Cavity of a Low-energy Storage Ring for Thomson Scattering X-Ray Source

438

SUPSS090

use link to see paper's listing under its alternate paper code

L. Ovchinnikova, V.I. Shvedunov
SINP MSU, Moscow, Russia
A. Ryabov
IHEP, Moscow Region, Russia
V.I. Shvedunov
LEA MSU, Moscow, Russia

Results of optimization of the RF cavity of a low-energy storage ring for Thomson scattering X-ray source are presented. The geometry of 714 MHz RF cavity was optimized to provide maximum shunt impedance taking into account position of higher order modes (HOMs). The number and position of cooling channels were adjusted to minimize frequency shift due to cavity thermal deformations. The waveguide coupler and frequency tuner were calculated. Special attention was paid to detailed calculations of the HOMs parameter and to study of methods to minimize their influence on the storage ring beam dynamics.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB035

A Comparative Study of Low Energy Compact Storage Rings for a Thomson Scattering X-ray Source

3308

L. Ovchinnikova, V.I. Shvedunov
SINP MSU, Moscow, Russia
E.G. Bessonov, M.V. Gorbunkov
LPI, Moscow, Russia
A.A. Mikhailichenko
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
V.I. Shvedunov
LEA MSU, Moscow, Russia

A low-energy (<50 MeV) compact storage ring is a basic component of an X-ray source with high average flux based on Thomson scattering. Such ring provides electron bunches with ~1 nC charge and repetition rate up to 100 MHz for interaction with intense laser pulses. Such ring should provide a small (tens of microns rms) beam radius at interaction point, must have large dynamic aperture, sufficient space for allocation of different elements, such as laser resonator, RF cavity, fast beam injection/extraction systems, beam pick-ups and correctors. In this report, we present the results of comparative study of four versions of storage ring with different structure of lattices.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)