IPAC2016 - List of Authors (Neri, L.)

Paper	Title	Page
TUPMR020	In-depth Analysis and Optimization of the European Spallation Source Front End Lattice	1274
	Y.I. Levinsen, M. Eshraqi ESS, Lund, Sweden L. Celona, L. Neri INFN/LNS, Catania, Italy
	The European Spallation Source front end will deliver a 62.5 mA beam current of 2.8 ms duration at 352 MHz to the downstream linac, which in turn will produce a 5 MW proton beam onto the target. Such unprecedented beam power requires a high quality beam with accurate and stable beam parameters in order to assure low beam losses and safe transport through the linac. In this paper we present advanced tuning methods for the low energy beam transport and the radio frequency quadrupole.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMY035	Preliminary Commissioning Results of the Proton Source for ESS at INFN-LNS	2628
	L. Celona, L. Allegra, A. Amato, G. Calabrese, A.C. Caruso, G. Castro, F. Chines, G. Gallo, S. Gammino, O. Leonardi, A. Longhitano, G. Manno, S. Marletta, D. Mascali, A. Maugeri, M. Mazzaglia, L. Neri, S. Passarello, G. Pastore, A. Seminara, A.S. Spartà, G. Torrisi, S. Vinciguerra INFN/LNS, Catania, Italy S. Di Martino, P. Nicotra Si.A.Tel SRL, Catania, Italy A. Longhitano ALTEK, San Gregorio (CATANIA), Italy G. Torrisi Universitá Mediterranea di Reggio Calabria, Reggio Calabria, Italy
	At Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali del Sud (INFN-LNS) - the commissioning of the high intensity Proton Source for the European Spallation Source (PS-ESS) is under way. Preliminary results of plasma diagnostics collected on a testbench called "Flexible Plasma Trap" (FPT) will be correlated to the peculiarities of the magnetic system design and of the microwave injection setup with a view of the possible implications on the beam extraction system. The status of the costruction is presented.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

In-depth Analysis and Optimization of the European Spallation Source Front End Lattice

1274

Y.I. Levinsen, M. Eshraqi
ESS, Lund, Sweden
L. Celona, L. Neri
INFN/LNS, Catania, Italy

The European Spallation Source front end will deliver a 62.5 mA beam current of 2.8 ms duration at 352 MHz to the downstream linac, which in turn will produce a 5 MW proton beam onto the target. Such unprecedented beam power requires a high quality beam with accurate and stable beam parameters in order to assure low beam losses and safe transport through the linac. In this paper we present advanced tuning methods for the low energy beam transport and the radio frequency quadrupole.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMY035

Preliminary Commissioning Results of the Proton Source for ESS at INFN-LNS

2628

L. Celona, L. Allegra, A. Amato, G. Calabrese, A.C. Caruso, G. Castro, F. Chines, G. Gallo, S. Gammino, O. Leonardi, A. Longhitano, G. Manno, S. Marletta, D. Mascali, A. Maugeri, M. Mazzaglia, L. Neri, S. Passarello, G. Pastore, A. Seminara, A.S. Spartà, G. Torrisi, S. Vinciguerra
INFN/LNS, Catania, Italy
S. Di Martino, P. Nicotra
Si.A.Tel SRL, Catania, Italy
A. Longhitano
ALTEK, San Gregorio (CATANIA), Italy
G. Torrisi
Universitá Mediterranea di Reggio Calabria, Reggio Calabria, Italy

At Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali del Sud (INFN-LNS) - the commissioning of the high intensity Proton Source for the European Spallation Source (PS-ESS) is under way. Preliminary results of plasma diagnostics collected on a testbench called "Flexible Plasma Trap" (FPT) will be correlated to the peculiarities of the magnetic system design and of the microwave injection setup with a view of the possible implications on the beam extraction system. The status of the costruction is presented.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)