IPAC2016 - List of Authors (Munoz, M.)

Paper	Title	Page
MOPOY045	ESS Linac Beam Physics Design Update	947
	M. Eshraqi, H. Danared, R. De Prisco, A. Jansson, Y.I. Levinsen, M. Lindroos, R. Miyamoto, M. Muñoz, A. Ponton ESS, Lund, Sweden
	The European Spallation Source, ESS, uses a linear accelerator to bombard the tungsten target with the high intensity protons beam for producing intense beams of neutrons. The nominal average beam power of the linac is 5~MW with a peak beam power at target of 125~MW. This paper focuses on the beam dynamics design of the ESS linac and the diagnostics elements used for the tuning of the lattice and matching between sections.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY042	Open XAL Status Report 2016	3083
	T.A. Pelaia II, C.K. Allen, A.P. Shishlo, A.P. Zhukov ORNL, Oak Ridge, Tennessee, USA D.A. Brown NMSU, Las Cruces, New Mexico, USA Y.-C. Chao TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada C.P. Chu, Y. Zhang FRIB, East Lansing, Michigan, USA P. Gillette, P. Laurent, E. Lécorché, G. Normand GANIL, Caen, France E. Laface, Y.I. Levinsen, M. Muñoz ESS, Lund, Sweden Y. Li IHEP, Beijing, People's Republic of China I. List, M. Pavleski Cosylab, Ljubljana, Slovenia X.H. Lu CSNS, Guangdong Province, People's Republic of China
	Funding: This manuscript has been authored by UT-Battelle, LLC, under Contract No. DE-AC0500OR22725 with the U.S. Department of Energy. Formed in 2010, the Open XAL accelerator physics software platform was developed through an international collaboration among several facilities to establish it as a standard for accelerator physics software. While active development continues, the project has now matured. This paper presents the current status of the project, a roadmap for continued development and an overview of the project status at each participating facility.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY043	Plans for the European Spallation Source Beam Physics Control Software	3086
	Y.I. Levinsen, R. De Prisco, M. Eshraqi, E. Laface, R. Miyamoto, M. Muñoz ESS, Lund, Sweden I. List Cosylab, Ljubljana, Slovenia
	The commissioning and operations planning for the European Spallation Source is currently being defined. It is foreseen that the ESS will begin to deliver beam on target by mid 2019, something which is urging a well structured and thought through plan both for commissioning and operations. In this paper we will discuss the plans for beam physics operational software, priorities and software services needed during the different stages of beam commissioning.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

ESS Linac Beam Physics Design Update

947

M. Eshraqi, H. Danared, R. De Prisco, A. Jansson, Y.I. Levinsen, M. Lindroos, R. Miyamoto, M. Muñoz, A. Ponton
ESS, Lund, Sweden

The European Spallation Source, ESS, uses a linear accelerator to bombard the tungsten target with the high intensity protons beam for producing intense beams of neutrons. The nominal average beam power of the linac is 5~MW with a peak beam power at target of 125~MW. This paper focuses on the beam dynamics design of the ESS linac and the diagnostics elements used for the tuning of the lattice and matching between sections.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY042

Open XAL Status Report 2016

3083

T.A. Pelaia II, C.K. Allen, A.P. Shishlo, A.P. Zhukov
ORNL, Oak Ridge, Tennessee, USA
D.A. Brown
NMSU, Las Cruces, New Mexico, USA
Y.-C. Chao
TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada
C.P. Chu, Y. Zhang
FRIB, East Lansing, Michigan, USA
P. Gillette, P. Laurent, E. Lécorché, G. Normand
GANIL, Caen, France
E. Laface, Y.I. Levinsen, M. Muñoz
ESS, Lund, Sweden
Y. Li
IHEP, Beijing, People's Republic of China
I. List, M. Pavleski
Cosylab, Ljubljana, Slovenia
X.H. Lu
CSNS, Guangdong Province, People's Republic of China

Funding: This manuscript has been authored by UT-Battelle, LLC, under Contract No. DE-AC0500OR22725 with the U.S. Department of Energy.
Formed in 2010, the Open XAL accelerator physics software platform was developed through an international collaboration among several facilities to establish it as a standard for accelerator physics software. While active development continues, the project has now matured. This paper presents the current status of the project, a roadmap for continued development and an overview of the project status at each participating facility.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY043

Plans for the European Spallation Source Beam Physics Control Software

3086

Y.I. Levinsen, R. De Prisco, M. Eshraqi, E. Laface, R. Miyamoto, M. Muñoz
ESS, Lund, Sweden
I. List
Cosylab, Ljubljana, Slovenia

The commissioning and operations planning for the European Spallation Source is currently being defined. It is foreseen that the ESS will begin to deliver beam on target by mid 2019, something which is urging a well structured and thought through plan both for commissioning and operations. In this paper we will discuss the plans for beam physics operational software, priorities and software services needed during the different stages of beam commissioning.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)