IPAC2016 - List of Authors (McNevin, J.)

Paper	Title	Page
TUPOY041	A Metal-Dielectric Micro-Linac for Radiography Source Replacement	1992
	A.V. Smirnov, S. Boucher, S.V. Kutsaev RadiaBeam Systems, Santa Monica, California, USA R.B. Agustsson, R.D.B. Berry, J.J. Hartzell, J. McNevin, A.Y. Murokh RadiaBeam, Santa Monica, California, USA G. Leyh LOD, Brisbane, USA E.A. Savin MEPhI, Moscow, Russia
	Funding: * US Department of Energy Contract # DE-SC0011370 To improve public security and prevent the diversion of radioactive material for Radiation Dispersion Devices, RadiaBeam is developing an inexpensive, portable, easy-to-manufacture linac structure to allow effective capture of a ~13 keV electron beam injected from a conventional electron gun and acceleration to a final energy of ~ 1 MeV. The bremsstrahlung X-rays produced by the electron beam on a high-Z converter at the end of the linac will match the penetration and dose rate of a typical ~100 Ci or more Ir-192 source. The tubular Disk-and-Ring structure under development consists of metal and dielectric elements that reduce or even eliminate multi-cell, multi-step brazing. This may allow significant simplification of the fabrication process to enable inexpensive mass-production required for replacement of the ~55,000 radionuclide sources in the US
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A Metal-Dielectric Micro-Linac for Radiography Source Replacement

1992

A.V. Smirnov, S. Boucher, S.V. Kutsaev
RadiaBeam Systems, Santa Monica, California, USA
R.B. Agustsson, R.D.B. Berry, J.J. Hartzell, J. McNevin, A.Y. Murokh
RadiaBeam, Santa Monica, California, USA
G. Leyh
LOD, Brisbane, USA
E.A. Savin
MEPhI, Moscow, Russia

Funding: * US Department of Energy Contract # DE-SC0011370
To improve public security and prevent the diversion of radioactive material for Radiation Dispersion Devices, RadiaBeam is developing an inexpensive, portable, easy-to-manufacture linac structure to allow effective capture of a ~13 keV electron beam injected from a conventional electron gun and acceleration to a final energy of ~ 1 MeV. The bremsstrahlung X-rays produced by the electron beam on a high-Z converter at the end of the linac will match the penetration and dose rate of a typical ~100 Ci or more Ir-192 source. The tubular Disk-and-Ring structure under development consists of metal and dielectric elements that reduce or even eliminate multi-cell, multi-step brazing. This may allow significant simplification of the fabrication process to enable inexpensive mass-production required for replacement of the ~55,000 radionuclide sources in the US

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)