IPAC2016 - List of Authors (Margaryan, A.V.)

Paper	Title	Page
MOPOR037	Beam Halo Measurements using Vibrating Wire at the KOMAC	680
SUPSS057	use link to see paper's listing under its alternate paper code
	D. Choe, M. Chung, S.Y. Kim UNIST, Ulsan, Republic of Korea S.G. Arutunian, A.V. Margaryan ANSL, Yerevan, Armenia E.G. Lazareva YSU, Yerevan, Armenia
	In high-intensity particle accelerators, due to the fact that preventing beam loss plays a crucial role in con-ducting any experiments, it is important to measure and control the beam halo. Fortunately, it is feasible nowadays to measure the beam halo region thanks to the development of several sensitive beam scanning methods, including the vibrating wire technique. Since the vibrating wire is exceptionally sensitive to the heat deposition by the beam particles, it can be used to scanning the beam profile. This study will be concentrated on the precise beam profile measurement using the vibrating wire at the Korea Multi-Purpose Accelerator Complex (KOMAC) facility. First, we describe the best condition to construct beam profile measurement experiment. Finally, we present the results of the beam halo measurements performed with 20 MeV proton beam at the KOMAC facility
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOPOR037

Beam Halo Measurements using Vibrating Wire at the KOMAC

680

SUPSS057

use link to see paper's listing under its alternate paper code

D. Choe, M. Chung, S.Y. Kim
UNIST, Ulsan, Republic of Korea
S.G. Arutunian, A.V. Margaryan
ANSL, Yerevan, Armenia
E.G. Lazareva
YSU, Yerevan, Armenia

In high-intensity particle accelerators, due to the fact that preventing beam loss plays a crucial role in con-ducting any experiments, it is important to measure and control the beam halo. Fortunately, it is feasible nowadays to measure the beam halo region thanks to the development of several sensitive beam scanning methods, including the vibrating wire technique. Since the vibrating wire is exceptionally sensitive to the heat deposition by the beam particles, it can be used to scanning the beam profile. This study will be concentrated on the precise beam profile measurement using the vibrating wire at the Korea Multi-Purpose Accelerator Complex (KOMAC) facility. First, we describe the best condition to construct beam profile measurement experiment. Finally, we present the results of the beam halo measurements performed with 20 MeV proton beam at the KOMAC facility

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)