IPAC2016 - List of Authors (Lee, S.J.)

Paper	Title	Page
WEYB01	Diagnostic Systems of the PAL-XFEL	2091
	C. Kim, S.Y. Baek, H. J. Choi, J.H. Hong, H.-S. Kang, G. Kim, J.H. Kim, I.S. Ko, S.J. Lee, G. Mun, B.G. Oh, B.R. Park, D.C. Shin, H. Yang PAL, Pohang, Kyungbuk, Republic of Korea
	The Pohang Accelerator Laboratory (PAL) started an x-ray free electron laser project (PAL-XFEL) in 2011. The construction was finished at the end of 2015 and the commissioning is planned from the beginning of 2016. In the PAL-XFEL, an electron beam with 200 pC will be generated from a photocathode RF gun and will be accelerated to 10 GeV by using a linear accelerator. The electron beam will pass through undulator section to produce hard X-ray radiation. For the successful commissioning and beam operation, various kinds of instruments were prepared.
	Slides WEYB01 [11.770 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY028	Laser Heater System Test at PAL-XFEL ITF	3048
	J. H. Lee POSTECH, Pohang, Kyungbuk, Republic of Korea J.H. Han, J.H. Hong, C.H. Kim, I.S. Ko, S.J. Lee PAL, Pohang, Kyungbuk, Republic of Korea
	Coherent x-ray photons are generated by a free electron laser (FEL). In PAL-XFEL, a photon beam with a 0.1 nm wavelength is generated from an electron bunch based on self-amplified spontaneous emission (SASE). An electron bunch with an uncorrelated energy spread in a level of 3 keV, which is generated from the photocathode RF gun, may be sensitive to longitudinal micro-bunching instability. The energy spread of an electron bunch can be increased to suppress the instability by Landau damping. In order to control the uncorrelated energy spread, a laser heater system, which has a chicane with four dipoles chicane and a 0.5 m long undulator, was installed in the injector test facility (ITF) of PAL. In this paper, we introduce the parameters of the laser heater and heating effect on the electron bunch.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Diagnostic Systems of the PAL-XFEL

2091

C. Kim, S.Y. Baek, H. J. Choi, J.H. Hong, H.-S. Kang, G. Kim, J.H. Kim, I.S. Ko, S.J. Lee, G. Mun, B.G. Oh, B.R. Park, D.C. Shin, H. Yang
PAL, Pohang, Kyungbuk, Republic of Korea

The Pohang Accelerator Laboratory (PAL) started an x-ray free electron laser project (PAL-XFEL) in 2011. The construction was finished at the end of 2015 and the commissioning is planned from the beginning of 2016. In the PAL-XFEL, an electron beam with 200 pC will be generated from a photocathode RF gun and will be accelerated to 10 GeV by using a linear accelerator. The electron beam will pass through undulator section to produce hard X-ray radiation. For the successful commissioning and beam operation, various kinds of instruments were prepared.

Slides WEYB01 [11.770 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY028

Laser Heater System Test at PAL-XFEL ITF

3048

J. H. Lee
POSTECH, Pohang, Kyungbuk, Republic of Korea
J.H. Han, J.H. Hong, C.H. Kim, I.S. Ko, S.J. Lee
PAL, Pohang, Kyungbuk, Republic of Korea

Coherent x-ray photons are generated by a free electron laser (FEL). In PAL-XFEL, a photon beam with a 0.1 nm wavelength is generated from an electron bunch based on self-amplified spontaneous emission (SASE). An electron bunch with an uncorrelated energy spread in a level of 3 keV, which is generated from the photocathode RF gun, may be sensitive to longitudinal micro-bunching instability. The energy spread of an electron bunch can be increased to suppress the instability by Landau damping. In order to control the uncorrelated energy spread, a laser heater system, which has a chicane with four dipoles chicane and a 0.5 m long undulator, was installed in the injector test facility (ITF) of PAL. In this paper, we introduce the parameters of the laser heater and heating effect on the electron bunch.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)