IPAC2016 - List of Authors (Jung, S.H.)

Paper	Title	Page
MOPMR003	Electron Bunch Length Measurement Using Coherent Radiation Source of fs-THz accelerator at Pohang Accelerator Laboratory	235
SUPSS071	use link to see paper's listing under its alternate paper code
	J.H. Ko, I.S. Ko POSTECH, Pohang, Kyungbuk, Republic of Korea S.H. Jung, H.-S. Kang, I.S. Ko, J. Park PAL, Pohang, Kyungbuk, Republic of Korea
	A Michelson interferometer was installed at the femtosecond (fs) terahertz (THz) Accelerator of Pohang Accelerator Laboratory(PAL) to measure a subpicosecond order electron bunch length. To measure an ultra-short electron bunch length, we use reconstruction process and fast fourier transform. Currently, we are generating THz radiation with the pulse energy of 7μJ by means of coherent transition radiation (CTR) from a 65-MeV electron beam of the fs-THz accelerator. In this paper, we show the how to make a longitudinal distribution of electron bunch and the radiation intensity difference between CTR and Coherent edge radiation (CER) for nondestructive electron bunch length measurement. And we report the measurement methods to get the fine electron bunch length information.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOY057	RF Timing Distribution and Laser Synchronization Commissioning of PAL-XFEL	4234
	C.-K. Min, S.H. Jung, H.-S. Kang, C. Kim, I.S. Ko, S.J. Park PAL, Pohang, Kyungbuk, Republic of Korea
	PAL-XFEL requires <100 fs synchronization of LLRF systems and optical lasers for stable operation and even lower jitter is favorable in higher performance and pump-probe experiments. The RF timing distribution system is based on a 476 MHz reference line, which is converted to 2.856 GHz at 16 locations over 1.5 km distance using phase-locked DRO. The 2.856 GHz signals are amplified and split to 10 outputs, which is connected to LLRFs, BAMs, and DCMs through low timing drift cables. The jitter between two different PLDRO units is estimated to ~1 fs from 1 Hz to 1 MHz. The synchronization jitter between a Ti:sapphire laser and the 2.856 GHz signal is measured less than 20 fs.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Electron Bunch Length Measurement Using Coherent Radiation Source of fs-THz accelerator at Pohang Accelerator Laboratory

235

SUPSS071

use link to see paper's listing under its alternate paper code

J.H. Ko, I.S. Ko
POSTECH, Pohang, Kyungbuk, Republic of Korea
S.H. Jung, H.-S. Kang, I.S. Ko, J. Park
PAL, Pohang, Kyungbuk, Republic of Korea

A Michelson interferometer was installed at the femtosecond (fs) terahertz (THz) Accelerator of Pohang Accelerator Laboratory(PAL) to measure a subpicosecond order electron bunch length. To measure an ultra-short electron bunch length, we use reconstruction process and fast fourier transform. Currently, we are generating THz radiation with the pulse energy of 7μJ by means of coherent transition radiation (CTR) from a 65-MeV electron beam of the fs-THz accelerator. In this paper, we show the how to make a longitudinal distribution of electron bunch and the radiation intensity difference between CTR and Coherent edge radiation (CER) for nondestructive electron bunch length measurement. And we report the measurement methods to get the fine electron bunch length information.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOY057

RF Timing Distribution and Laser Synchronization Commissioning of PAL-XFEL

4234

C.-K. Min, S.H. Jung, H.-S. Kang, C. Kim, I.S. Ko, S.J. Park
PAL, Pohang, Kyungbuk, Republic of Korea

PAL-XFEL requires <100 fs synchronization of LLRF systems and optical lasers for stable operation and even lower jitter is favorable in higher performance and pump-probe experiments. The RF timing distribution system is based on a 476 MHz reference line, which is converted to 2.856 GHz at 16 locations over 1.5 km distance using phase-locked DRO. The 2.856 GHz signals are amplified and split to 10 outputs, which is connected to LLRFs, BAMs, and DCMs through low timing drift cables. The jitter between two different PLDRO units is estimated to ~1 fs from 1 Hz to 1 MHz. The synchronization jitter between a Ti:sapphire laser and the 2.856 GHz signal is measured less than 20 fs.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)