IPAC2016 - List of Authors (Harada, H.)

Paper	Title	Page
MOPOR003	Simulation Studies and Measurements of Beam Instabilities Caused by the Kicker Impedance at High Intensities in the 3-GeV RCS of J-PARC	589
	P.K. Saha, H. Harada, N. Hayashi, H. Hotchi, M. Kinsho, M. Nomura, Y. Shobuda, F. Tamura, N. Tani, Y. Watanabe, M. Yamamoto JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
	The transverse impedance of the extraction kickers is a significant beam instability source in the 3-GeV Rapid Cycling Synchrotron of J-PARC. ORBIT code was developed for space charge and beam instability simulations by successfully introducing realistic time dependent machine parameters. The beam instability at high intensities, especially at the designed 1 MW beam power was found be very critical. As there was no practical measure yet to reduce the kicker impedance, a detail simulation studies were done in order to determine realistic machine parameters to suppress the beam instability. The simulation results were found to be very consistent with measurements to successfully accomplish 1 MW beam power. The simulation and beam study results in detail are presented in this paper.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOR004	Recent Progress of 1-MW Beam Tuning in the J-PARC 3-GeV RCS	592
	H. Hotchi, H. Harada, S. Kato, M. Kinsho, K. Okabe, P.K. Saha, Y. Shobuda, F. Tamura, N. Tani, Y. Watanabe, K. Yamamoto, M. Yoshimoto JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
	The J-PARC 3-GeV RCS started 1 MW beam test from October 2014, and successfully achieved a 1 MW beam acceleration in January 2015. Since then, a large fraction of our effort has been focused on reducing and managing beam losses. This paper presents the recent progress of 1 MW beam tuning, especially focusing on our approaches to beam loss issues, such as space-charge induced beam loss and foil scattering beam loss during charge-exchange injection, etc.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOY034	Simulations of the Beam Loss Distribution at J-PARC Main Ring	4175
	B. Yee-Rendón, H. Kuboki, Y. Sato, K. Satou, M.J. Shirakata, T. Toyama KEK, Ibaraki, Japan H. Harada JAEA/J-PARC, Tokai-mura, Japan
	The Japan Proton Accelerator Research Complex (J-PARC) is integrated by a set of high intensity proton accelerators. At this operation level, the monitoring and control of the beam losses and residual radiation are priority for its safe performance and maintenance. At Main Ring (MR), a discrepancy appears between the beam loss signal detected by the monitors and the residual dose measured. To understand this difference and the mechanism that produces these losses, a beam simulation study is implemented using the Strategic Accelerator Design (SAD) and Geometry and Tracking (Geant4) code. The first stage of the survey uses SAD to obtain the location of the losses around the lattice per turn. Then, Geant4 produces the secondary showers in the elements. Finally, we make the extrapolation with the residual radiation and compare with the measurements. The description and results of this work are presented in this paper.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Simulation Studies and Measurements of Beam Instabilities Caused by the Kicker Impedance at High Intensities in the 3-GeV RCS of J-PARC

589

P.K. Saha, H. Harada, N. Hayashi, H. Hotchi, M. Kinsho, M. Nomura, Y. Shobuda, F. Tamura, N. Tani, Y. Watanabe, M. Yamamoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan

The transverse impedance of the extraction kickers is a significant beam instability source in the 3-GeV Rapid Cycling Synchrotron of J-PARC. ORBIT code was developed for space charge and beam instability simulations by successfully introducing realistic time dependent machine parameters. The beam instability at high intensities, especially at the designed 1 MW beam power was found be very critical. As there was no practical measure yet to reduce the kicker impedance, a detail simulation studies were done in order to determine realistic machine parameters to suppress the beam instability. The simulation results were found to be very consistent with measurements to successfully accomplish 1 MW beam power. The simulation and beam study results in detail are presented in this paper.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOR004

Recent Progress of 1-MW Beam Tuning in the J-PARC 3-GeV RCS

592

H. Hotchi, H. Harada, S. Kato, M. Kinsho, K. Okabe, P.K. Saha, Y. Shobuda, F. Tamura, N. Tani, Y. Watanabe, K. Yamamoto, M. Yoshimoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan

The J-PARC 3-GeV RCS started 1 MW beam test from October 2014, and successfully achieved a 1 MW beam acceleration in January 2015. Since then, a large fraction of our effort has been focused on reducing and managing beam losses. This paper presents the recent progress of 1 MW beam tuning, especially focusing on our approaches to beam loss issues, such as space-charge induced beam loss and foil scattering beam loss during charge-exchange injection, etc.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOY034

Simulations of the Beam Loss Distribution at J-PARC Main Ring

4175

B. Yee-Rendón, H. Kuboki, Y. Sato, K. Satou, M.J. Shirakata, T. Toyama
KEK, Ibaraki, Japan
H. Harada
JAEA/J-PARC, Tokai-mura, Japan

The Japan Proton Accelerator Research Complex (J-PARC) is integrated by a set of high intensity proton accelerators. At this operation level, the monitoring and control of the beam losses and residual radiation are priority for its safe performance and maintenance. At Main Ring (MR), a discrepancy appears between the beam loss signal detected by the monitors and the residual dose measured. To understand this difference and the mechanism that produces these losses, a beam simulation study is implemented using the Strategic Accelerator Design (SAD) and Geometry and Tracking (Geant4) code. The first stage of the survey uses SAD to obtain the location of the losses around the lattice per turn. Then, Geant4 produces the secondary showers in the elements. Finally, we make the extrapolation with the residual radiation and compare with the measurements. The description and results of this work are presented in this paper.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)