Paper |
Title |
Page |
MOPMB017 |
Design Issues for the Optical Transition Radiation Screens for theELI-NP Compton Gamma Source |
118 |
|
- M. Marongiu, A. Giribono, A. Mostacci, V. Pettinacci
INFN-Roma, Roma, Italy
- D. Alesini, E. Chiadroni, F. Cioeta, G. Di Pirro, V.L. Lollo, L. Pellegrino, V. Shpakov, A. Stella, C. Vaccarezza, A. Variola
INFN/LNF, Frascati (Roma), Italy
- A. Cianchi
INFN-Roma II, Roma, Italy
- L. Palumbo
University of Rome La Sapienza, Rome, Italy
|
|
|
A high brightness electron LINAC is being built in the Compton Gamma Source at the ELI Nuclear Physics facility in Romania. To achieve the design luminosity, a train of 32, 16 ns spaced, bunches with a nominal charge of 250 pC will collide with the laser beam in the interaction point. Electron beam spot size is measured with optical transition radiation profile monitors. In order to measure the beam properties along the train, the screens must sustain the thermal stress due to the energy deposited by the bunches; moreover the optical radiation detecting system must have the necessary accuracy and resolution. This paper deals with the analytical studies as well as numerical simulations to investigate the thermal behaviour of the screens impinged by the nominal bunch; the design and the performance of the optical detection line is discussed as well.
|
|
Export • |
reference for this paper to
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TUPOW004 |
Status of the STAR Project |
1747 |
|
- A. Bacci, I. Drebot, L. Serafini, V. Torri
Istituto Nazionale di Fisica Nucleare, Milano, Italy
- R.G. Agostino, R. Barberis, M. Ghedini, F. Martire, C. Pace
UNICAL, Arcavacata di Rende, Italy
- D. Alesini, M. Bellaveglia, J.J. Beltrano, F.G. Bisesto, G. Borgese, B. Buonomo, G. Di Pirro, G. Di Raddo, A. Esposito, A. Gallo, A. Ghigo, F. Iungo, L. Pellegrino, A. Stella, C. Vaccarezza
INFN/LNF, Frascati (Roma), Italy
- A. Cianchi
INFN-Roma II, Roma, Italy
- G. D'Auria, A. Fabris, M. Marazzi
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
- V. Petrillo
Universita' degli Studi di Milano, Milano, Italy
- E. Puppin
Politecnico/Milano, Milano, Italy
- M. Rossetti Conti
Universita' degli Studi di Milano & INFN, Milano, Italy
|
|
|
This paper reports on the final design and the work in progress on the STAR project (IPAC2014:WEPRO115), which is under construction at the Univ. of Calabria (Italy). The project is devoted to the construction of an advanced Thomson source of monochromatic tunable, ps-long, polarized X-ray beams, ranging from 40 up to 140 KeV . At present the buildings and main plants have been completed as the acquisition of main components: the RF photo-injector, the accelerating section, laser systems for collision and photo-cathode, RF Power Source and magnets are ready to start installation and site acceptance tests. The design of laser lines is complete and simulated by ZEMAX, aiming to minimize energy losses, optical distortions and providing a tunable experimental setup as well. The RF power network is close to be tested, it's based on a 55MW (2.5us pulse) S-band Klystron driven by a 500kV Pulse Forming Network based modulator and a Low Level RF system, running at 100 Hz. The Control System is been designed using EPICS and allows to manage easily and fastly each machine parameter. We expect to start commissioning the machine by the end of 2016 and obtain the first collisions within the first part of 2017.
|
|
Export • |
reference for this paper to
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
WEPMY007 |
Plasma Density Profile Characterization for Resonant Plasma Wakefield Acceleration Experiment at SPARC_LAB |
2554 |
|
- F. Filippi
INFN-Roma1, Rome, Italy
- M.P. Anania, A. Biagioni, E. Chiadroni, M. Ferrario
INFN/LNF, Frascati (Roma), Italy
- A. Cianchi
INFN-Roma II, Roma, Italy
- F. Filippi, A. Giribono, A. Mostacci, L. Palumbo
University of Rome La Sapienza, Rome, Italy
- F. Filippi, A. Giribono, A. Mostacci, L. Palumbo
INFN-Roma, Roma, Italy
- A. Giribono
University of Rome "La Sapienza", Rome, Italy
- A. Zigler
The Hebrew University of Jerusalem, The Racah Institute of Physics, Jerusalem, Israel
|
|
|
New generation of particle accelerators is based on the excitation of large amplitude plasma waves driven by either electron or laser beams, named as Plasma Wakefield Accelerator (PWFA) and Laser Wakefield Accelerator (LWFA), respectively. Future experiments scheduled at the SPARC_LAB test facility aim to demonstrate the acceleration of externally injected high brightness electron beams through both schemes. In particular, in the so-called resonant PWFA a train of more than two driver electron bunches generated with the laser comb technique resonantly excites wakefields into the plasma, the last bunch (witness) is injected at the proper accelerating phase gaining energy from the wake. The quality of the accelerated beam depends strongly on plasma density and its distribution along the acceleration length. The desired density can be achieved with a correct shaping of the capillary in which plasma is formed. The measurements of plasma density, as well as other plasma characteristics, can be performed with spectroscopic measurements of the plasma self emitted light. The measurement of density distribution for hydrogen filled capillaries is here reported.
|
|
Export • |
reference for this paper to
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
MOPMB019 |
Quadrupole Scan Emittance Measurements for the ELI-NP Compton Gamma Source |
126 |
|
- A.R. Rossi, A. Bacci, L. Serafini
Istituto Nazionale di Fisica Nucleare, Milano, Italy
- E. Chiadroni, C. Vaccarezza, A. Variola
INFN/LNF, Frascati (Roma), Italy
- A. Cianchi
Università di Roma II Tor Vergata, Roma, Italy
- C. Curatolo, I. Drebot
Universita' degli Studi di Milano e INFN, Milano, Italy
- A. Giribono, A. Mostacci
University of Rome La Sapienza, Rome, Italy
- V. Petrillo, M. Rossetti Conti
Universita' degli Studi di Milano & INFN, Milano, Italy
|
|
|
The high brightness electron LINAC of the Compton Gamma Source at the ELI Nuclear Physics facility in Romania is accelerating a train of 32 bunches with a nominal charge of 250 pC and nominal spacing of 16 ns. To achieve the design gamma flux, all the bunches along the train must have the designed Twiss parameters. Beam sizes are measured with optical transition radiation monitors, allowing a quadrupole scan for Twiss parameters measurements. Since focusing the whole bunch train on the screen may lead to permanent screen damage, we investigated non-conventional scans such as scans around a maximum of the beam size or scans with a controlled minimum spot size. This paper discusses the implementation issues of such a technique in the actual machine layout.
|
|
Export • |
reference for this paper to
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|