IPAC2016 - List of Authors (Cao, J.S.)

Paper	Title	Page
MOPMB036	Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility	167
	D.C. Zhu, J.S. Cao, Y.F. Sui, J.H. Yue IHEP, Beijing, People's Republic of China J. Chen SINAP, Shanghai, People's Republic of China
	For the third-generation light sources, the vertical emit-tance of a few pico-meter-radians which can be achieved with good coupling correction close to 0.1%, will lead to very small beam size. Several microns vertical beam sizes measurement has presented challenges for diagnostic capability in this region. A few techniques have been developed to make a precise measurement, such as visible light interferometer, x-ray imaging using Fresnel zone plates, compound refractive lenses or pinhole camera. In this paper, an x-ray reflective optics method based on the Kirkpatrick'Baez mirrors will be emphasis on discussed. The K-B mirror system will be installed and tested in SSRF to obtain the vertical beam size close to 20 microns, which is expected to be used for several microns vertical beam size measurement in the future light source named HEPS (High Energy Photon Source) in China.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBA02	Commissioning of the China-ADS Injector-I Testing Facility	2048
	F. Yan, J.S. Cao, Y.L. Chi, R. Ge, H. Geng, S. Gu, D.Z. Guo, T.M. Huang, X. Jing, H. Li, R.L. Liu, F. Long, C. Meng, H.F. Ouyang, W.M. Pan, Q.L. Peng, Y.F. Sui, J.L. Wang, S.C. Wang, Z. Xue, Q. Ye, Y.L. Zhao IHEP, Beijing, People's Republic of China
	The 10 MeV accelerator-driven subcritical system (ADS) Injector I test stand at Institute of High Energy Physics (IHEP) is a testing facility dedicated to demonstrate one of the two injector design schemes [Injector Scheme-I, which works at 325 MHz], for the ADS project in China. The ion source was installed since April of 2014, periods of commissioning are regularly scheduled between installation phases of the rest of the injector. 6.05 MeV proton energy has been achieved with average beam current of 10 mA by 7 SC spoke cavities at present. This contribution reports the details of the commissioning results together with the challenges of the CW machine commissioning.
	Slides WEOBA02 [5.243 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility

167

D.C. Zhu, J.S. Cao, Y.F. Sui, J.H. Yue
IHEP, Beijing, People's Republic of China
J. Chen
SINAP, Shanghai, People's Republic of China

For the third-generation light sources, the vertical emit-tance of a few pico-meter-radians which can be achieved with good coupling correction close to 0.1%, will lead to very small beam size. Several microns vertical beam sizes measurement has presented challenges for diagnostic capability in this region. A few techniques have been developed to make a precise measurement, such as visible light interferometer, x-ray imaging using Fresnel zone plates, compound refractive lenses or pinhole camera. In this paper, an x-ray reflective optics method based on the Kirkpatrick'Baez mirrors will be emphasis on discussed. The K-B mirror system will be installed and tested in SSRF to obtain the vertical beam size close to 20 microns, which is expected to be used for several microns vertical beam size measurement in the future light source named HEPS (High Energy Photon Source) in China.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBA02

Commissioning of the China-ADS Injector-I Testing Facility

2048

F. Yan, J.S. Cao, Y.L. Chi, R. Ge, H. Geng, S. Gu, D.Z. Guo, T.M. Huang, X. Jing, H. Li, R.L. Liu, F. Long, C. Meng, H.F. Ouyang, W.M. Pan, Q.L. Peng, Y.F. Sui, J.L. Wang, S.C. Wang, Z. Xue, Q. Ye, Y.L. Zhao
IHEP, Beijing, People's Republic of China

The 10 MeV accelerator-driven subcritical system (ADS) Injector I test stand at Institute of High Energy Physics (IHEP) is a testing facility dedicated to demonstrate one of the two injector design schemes [Injector Scheme-I, which works at 325 MHz], for the ADS project in China. The ion source was installed since April of 2014, periods of commissioning are regularly scheduled between installation phases of the rest of the injector. 6.05 MeV proton energy has been achieved with average beam current of 10 mA by 7 SC spoke cavities at present. This contribution reports the details of the commissioning results together with the challenges of the CW machine commissioning.

Slides WEOBA02 [5.243 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)