IPAC2016 - List of Authors (Calaga, R.)

Paper	Title	Page
TUPMW034	A 200 MHz SC-RF System for the HL-LHC	1513
	R. Calaga, R. Tomás CERN, Geneva, Switzerland
	Funding: Research supported by the High Luminosity LHC project A quarter wave β=1 superconducting cavity at 200 MHz is proposed for the LHC as an alternative to the present 400 MHz RF system. The primary motivation of such a system would be to accelerate higher intensity and longer bunches with improved capture efficiency. Advantages related to minimizing electron cloud effects, intra-beam scattering, heating and the possibility of luminosity levelling with bunch length are described. Some considerations related to cavity optimization, beam loading and technological challenges are addressed.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMB058	LHC Crab Cavity Coupler Test Boxes	2248
	J.A. Mitchell Lancaster University, Lancaster, United Kingdom R. Apsimon, G. Burt, A.R.J. Tutte Cockcroft Institute, Lancaster University, Lancaster, United Kingdom R. Calaga, A. Macpherson, E. Montesinos CERN, Geneva, Switzerland S.D. Silva ODU, Norfolk, Virginia, USA B. P. Xiao BNL, Upton, Long Island, New York, USA
	The LHC double quarter wave (DQW) crab cavities have two different types of Higher Order Mode (HOM) couplers in addition to a fundamental power coupler (FPC). The FPC requires conditioning, so to achieve this we have designed a radio-frequency (RF) quarter wave resonator to provide high transmission between two opposing FPCs. For the HOM couplers we must ensure that the stop-band filter is positioned at the cavity frequency and that peak transmission occurs at the same frequencies as the strongest HOMs. We have designed two test boxes which preserve the cavity spectral response in order to test the couplers.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR038	Frequency Tuning for a DQW Crab Cavity	2357
	S. Verdú-Andrés, I. Ben-Zvi, J. Skaritka, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA K. Artoos, R. Calaga, O. Capatina, R. Leuxe, C. Zanoni CERN, Geneva, Switzerland I. Ben-Zvi Stony Brook University, Stony Brook, USA
	Funding: Work supported by US DOE via BSA LLC contract No.DE-AC02-98CH10886, the US LARP program, US DOE contract No. DE-AC02-05CH1123 (NERSC resources) and by HiLumi project. The nominal operating frequency for the HL-LHC crab cavities is 400.79 MHz within a bandwidth of ±60kHz. Attaining the required cavity tune implies a good understanding of all the processes that influence the cavity frequency from the moment when the cavity parts are being fabricated until the cavity is installed and under operation. Different tuning options will be available for the DQW crab cavity of LHC. This paper details the different steps in the cavity fabrication and preparation that may introduce a shift in the cavity frequency and introduces the different tuning methods foreseen to bring the cavity frequency to meet the specifications.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR024	Electrical Power Budget for FCC-ee	3828
	F. Zimmermann, S. Aull, M. Benedikt, D. Bozzini, O. Brunner, J.-P. Burnet, A.C. Butterworth, R. Calaga, E. Jensen, V. Mertens, A. Milanese, M. Nonis, N. Schwerg, L.J. Tavian, J. Wenninger CERN, Geneva, Switzerland A.P. Blondel, M. Koratzinos DPNC, Genève, Switzerland Sh. Gorgi Zadeh Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany K. Oide KEK, Ibaraki, Japan L. Rinolfi JUAS, Archamps, France
	Funding: Supported by the European Commission under the Capacities 7th Framework Programme project EuCARD-2, grant agreement 312453. We present a first rough estimate for the electrical power consumption of the FCC-ee lepton collider. This electrical power is dominated by the RF system, which provides the motivation for the ongoing R&D on highly efficient RF power sources. Other contributions come from the warm arc magnets, the cryogenics systems, cooling, ventilation, general services, the particle-physics detectors, and the injector complex.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A 200 MHz SC-RF System for the HL-LHC

1513

R. Calaga, R. Tomás
CERN, Geneva, Switzerland

Funding: Research supported by the High Luminosity LHC project
A quarter wave β=1 superconducting cavity at 200 MHz is proposed for the LHC as an alternative to the present 400 MHz RF system. The primary motivation of such a system would be to accelerate higher intensity and longer bunches with improved capture efficiency. Advantages related to minimizing electron cloud effects, intra-beam scattering, heating and the possibility of luminosity levelling with bunch length are described. Some considerations related to cavity optimization, beam loading and technological challenges are addressed.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMB058

LHC Crab Cavity Coupler Test Boxes

2248

J.A. Mitchell
Lancaster University, Lancaster, United Kingdom
R. Apsimon, G. Burt, A.R.J. Tutte
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
R. Calaga, A. Macpherson, E. Montesinos
CERN, Geneva, Switzerland
S.D. Silva
ODU, Norfolk, Virginia, USA
B. P. Xiao
BNL, Upton, Long Island, New York, USA

The LHC double quarter wave (DQW) crab cavities have two different types of Higher Order Mode (HOM) couplers in addition to a fundamental power coupler (FPC). The FPC requires conditioning, so to achieve this we have designed a radio-frequency (RF) quarter wave resonator to provide high transmission between two opposing FPCs. For the HOM couplers we must ensure that the stop-band filter is positioned at the cavity frequency and that peak transmission occurs at the same frequencies as the strongest HOMs. We have designed two test boxes which preserve the cavity spectral response in order to test the couplers.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR038

Frequency Tuning for a DQW Crab Cavity

2357

S. Verdú-Andrés, I. Ben-Zvi, J. Skaritka, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
K. Artoos, R. Calaga, O. Capatina, R. Leuxe, C. Zanoni
CERN, Geneva, Switzerland
I. Ben-Zvi
Stony Brook University, Stony Brook, USA

Funding: Work supported by US DOE via BSA LLC contract No.DE-AC02-98CH10886, the US LARP program, US DOE contract No. DE-AC02-05CH1123 (NERSC resources) and by HiLumi project.
The nominal operating frequency for the HL-LHC crab cavities is 400.79 MHz within a bandwidth of ±60kHz. Attaining the required cavity tune implies a good understanding of all the processes that influence the cavity frequency from the moment when the cavity parts are being fabricated until the cavity is installed and under operation. Different tuning options will be available for the DQW crab cavity of LHC. This paper details the different steps in the cavity fabrication and preparation that may introduce a shift in the cavity frequency and introduces the different tuning methods foreseen to bring the cavity frequency to meet the specifications.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR024

Electrical Power Budget for FCC-ee

3828

F. Zimmermann, S. Aull, M. Benedikt, D. Bozzini, O. Brunner, J.-P. Burnet, A.C. Butterworth, R. Calaga, E. Jensen, V. Mertens, A. Milanese, M. Nonis, N. Schwerg, L.J. Tavian, J. Wenninger
CERN, Geneva, Switzerland
A.P. Blondel, M. Koratzinos
DPNC, Genève, Switzerland
Sh. Gorgi Zadeh
Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany
K. Oide
KEK, Ibaraki, Japan
L. Rinolfi
JUAS, Archamps, France

Funding: Supported by the European Commission under the Capacities 7th Framework Programme project EuCARD-2, grant agreement 312453.
We present a first rough estimate for the electrical power consumption of the FCC-ee lepton collider. This electrical power is dominated by the RF system, which provides the motivation for the ongoing R&D on highly efficient RF power sources. Other contributions come from the warm arc magnets, the cryogenics systems, cooling, ventilation, general services, the particle-physics detectors, and the injector complex.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)