IPAC2016 - List of Authors (Baudrenghien, P.)

Paper	Title	Page
MOPOR008	Beam Induced RF Heating in LHC in 2015	602
	B. Salvant, O. Aberle, M. Albert, R. Alemany-Fernandez, G. Arduini, J. Baechler, M.J. Barnes, P. Baudrenghien, O.E. Berrig, N. Biancacci, G. Bregliozzi, J.V. Campelo, F. Carra, F. Caspers, P. Chiggiato, A. Danisi, H.A. Day, M. Deile, D. Druzhkin, J.F. Esteban Müller, S. Jakobsen, J. Kuczerowski, A. Lechner, R. Losito, A. Masi, N. Minafra, E. Métral, A.A. Nosych, A. Perillo Marcone, D. Perini, S. Redaelli, F. Roncarolo, G. Rumolo, E.N. Shaposhnikova, J.A. Uythoven, C. Vollinger, A.J. Välimaa, N. Wang, M. Wendt, J. Wenninger, C. Zannini CERN, Geneva, Switzerland M. Bozzo INFN Genova, Genova, Italy J.F. Esteban Müller EPFL, Lausanne, Switzerland N. Wang IHEP, Beijing, People's Republic of China
	Following the recurrent beam induced RF issues that perturbed LHC operation during LHC Run 1, a series of actions were put in place to minimize the risk that similar issues would occur in LHC Run 2: longitudinal impedance reduction campaign and/or improvement of cooling for equipment that were problematic or at the limit during Run 1, stringent constraints enforced on new equipment that would be installed in the machine, tests to control the bunch length and longitudinal distribution, additional monitoring of temperature, new monitoring tools and warning chains. This contribution reports the outcome of these actions, both successes as well as shortcomings, and details the lessons learnt for the future runs.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMW007	Validation of Off-momentum Cleaning Performance of the LHC Collimation System	2427
	B. Salvachua, P. Baudrenghien, R. Bruce, H. Garcia, P.D. Hermes, S. Jackson, M. Jaussi, A. Mereghetti, D. Mirarchi, S. Redaelli, H. Timko, G. Valentino, A. Valloni CERN, Geneva, Switzerland R. Kwee-Hinzmann Royal Holloway, University of London, Surrey, United Kingdom
	The LHC collimation system is designed to provide effective cleaning against losses coming from off-momentum particles, either due to un-captured beam or to an unexpected RF frequency change. For this reason the LHC is equipped with a hierarchy of collimators in IR3: primary, secondary and absorber collimators. After every collimator alignment or change of machine configuration the off-momentum cleaning efficiency is validated with loss maps at low intensity. We describe here the improved technique used in 2015 to generate such loss maps without completely dumping the beam into the collimators. The achieved performance of the collimation system for momentum cleaning is reviewed.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Induced RF Heating in LHC in 2015

602

B. Salvant, O. Aberle, M. Albert, R. Alemany-Fernandez, G. Arduini, J. Baechler, M.J. Barnes, P. Baudrenghien, O.E. Berrig, N. Biancacci, G. Bregliozzi, J.V. Campelo, F. Carra, F. Caspers, P. Chiggiato, A. Danisi, H.A. Day, M. Deile, D. Druzhkin, J.F. Esteban Müller, S. Jakobsen, J. Kuczerowski, A. Lechner, R. Losito, A. Masi, N. Minafra, E. Métral, A.A. Nosych, A. Perillo Marcone, D. Perini, S. Redaelli, F. Roncarolo, G. Rumolo, E.N. Shaposhnikova, J.A. Uythoven, C. Vollinger, A.J. Välimaa, N. Wang, M. Wendt, J. Wenninger, C. Zannini
CERN, Geneva, Switzerland
M. Bozzo
INFN Genova, Genova, Italy
J.F. Esteban Müller
EPFL, Lausanne, Switzerland
N. Wang
IHEP, Beijing, People's Republic of China

Following the recurrent beam induced RF issues that perturbed LHC operation during LHC Run 1, a series of actions were put in place to minimize the risk that similar issues would occur in LHC Run 2: longitudinal impedance reduction campaign and/or improvement of cooling for equipment that were problematic or at the limit during Run 1, stringent constraints enforced on new equipment that would be installed in the machine, tests to control the bunch length and longitudinal distribution, additional monitoring of temperature, new monitoring tools and warning chains. This contribution reports the outcome of these actions, both successes as well as shortcomings, and details the lessons learnt for the future runs.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMW007

Validation of Off-momentum Cleaning Performance of the LHC Collimation System

2427

B. Salvachua, P. Baudrenghien, R. Bruce, H. Garcia, P.D. Hermes, S. Jackson, M. Jaussi, A. Mereghetti, D. Mirarchi, S. Redaelli, H. Timko, G. Valentino, A. Valloni
CERN, Geneva, Switzerland
R. Kwee-Hinzmann
Royal Holloway, University of London, Surrey, United Kingdom

The LHC collimation system is designed to provide effective cleaning against losses coming from off-momentum particles, either due to un-captured beam or to an unexpected RF frequency change. For this reason the LHC is equipped with a hierarchy of collimators in IR3: primary, secondary and absorber collimators. After every collimator alignment or change of machine configuration the off-momentum cleaning efficiency is validated with loss maps at low intensity. We describe here the improved technique used in 2015 to generate such loss maps without completely dumping the beam into the collimators. The achieved performance of the collimation system for momentum cleaning is reviewed.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)