The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Tanaka, T. AU - Fukuda, M.K. AU - Inagaki, M. AU - Nagashima, R. AU - Nakao, K. AU - Nogami, K. AU - Sakai, T. AU - Satoh, D. AU - Takatomi, T. AU - Takatsuka, K. AU - Terunuma, N. AU - Urakawa, J. AU - Yoshida, M. ED - Schaa, Volker RW ED - Petit-Jean-Genaz, Christine ED - Ko, In Soo ED - Kim, Dong Eon ED - Kim, Kyung Sook TI - Optimization of C-band RF Input Coupler as a Mode Converter for 20-K Cryocooled Photocathode RF Gun J2 - Proc. of IPAC2016, Busan, Korea, May 8-13, 2016 C1 - Busan, Korea T2 - International Particle Accelerator Conference T3 - 7 LA - english AB - Development of a cryocooled 2.6-cell C-band photocathode RF gun has been conducted at Nihon University in collaboration with KEK. An RF mode converter from square TE10 to circular TM01 mode has been employed as an RF input coupler that has a coupling coefficient of approximately 20 at 20 K to the 2.6-cell accelerating structure. In the previous design, the circular waveguide in the mode converter formed part of the accelerating cavity. After the cold test of the cavity completed in 2014, the coupler design was modified to work as a pure mode converter with a VSWR of 1 at 5712 MHz. From the design simulation using CST-STUDIO, the insertion loss in the converter is 0.2 %. The TM010 and TM011 modes excited in the circular waveguide were separated by several ten MHz from the accelerating frequency. The simulation has suggested that the amplitude of the transverse electric filed on the axis in the circular waveguide is reduced to approximately 2 % of that in the longitudinal direction. PB - JACoW CP - Geneva, Switzerland SP - 2638 EP - 2640 KW - cavity KW - gun KW - coupling KW - simulation KW - insertion DA - 2016/06 PY - 2016 SN - 978-3-95450-147-2 DO - 10.18429/JACoW-IPAC2016-WEPMY038 UR - http://jacow.org/ipac2016/papers/wepmy038.pdf ER -