The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Suetsugu, Y. AU - Ishibashi, T. AU - Ishizaki, H. AU - Kimura, A. AU - Sawhata, T. AU - Terui, S. ED - Schaa, Volker RW ED - Petit-Jean-Genaz, Christine ED - Ko, In Soo ED - Kim, Dong Eon ED - Kim, Kyung Sook TI - Fabrication of Ferrite-Copper Block by Spark Plasma Sintering (SPS) J2 - Proc. of IPAC2016, Busan, Korea, May 8-13, 2016 C1 - Busan, Korea T2 - International Particle Accelerator Conference T3 - 7 LA - english AB - A ferrite has been well known as an effective material for absorbing electromagnetic waves. Various types of the ferrite blocks have been actually used in accelerator fields as the higher-order modes (HOMs) absorbers in the vacuum beam pipes. However, one of difficulties in using the ferrite is to bond it to the beam pipes with a sufficient adhesive force, and to assure the contact with a high thermal conductivity in vacuum. The brazing or Hot Isostatic Pressing (HIP) is not so easy owing to a low thermal expansion rate and a relatively low tensile strength of the ferrite. We established a method of fabricating a ferrite block bonded to copper by spark plasma sintering (SPS). The ferrite powders are directly sintered on a copper block in the SPS process together with some metals to relax the thermal stress between them. The sintered ferrite-copper block can be brazed or welded to other metal blocks, or directly on the beam pipes. Here reported are R&D results of the fabrication method, and some experimental results on the properties of the ferrite-copper block. PB - JACoW CP - Geneva, Switzerland SP - 3654 EP - 3656 KW - HOM KW - vacuum KW - cavity KW - higher-order-mode KW - plasma DA - 2016/06 PY - 2016 SN - 978-3-95450-147-2 DO - 10.18429/JACoW-IPAC2016-THPMY002 UR - http://jacow.org/ipac2016/papers/thpmy002.pdf ER -