ICALEPCS2019 - List of Authors (Dupre, A.)

Paper	Title	Page
MOPHA132	Control System Integration of MAX IV Insertion Devices	525
	J. Lidón-Simon, N.S. Al-Habib, H.Y. Al-Sallami, A. Dupre, V.H. Hardion, M. Lindberg, P. Sjöblom, A. Thiel, G. Todorescu MAX IV Laboratory, Lund University, Lund, Sweden
	During the last 2.5 years, MAX IV have installed and commissioned in total 15 insertion devices out of which 6 are new in vacuum undulators, 1 in vacuum wiggler, and 7 in-house developed and manufactured Apple II elliptical polarized undulators. From the old lab, MAXLAB, 1 PU is also reused. Looking forward, 3 additional insertion devices will be installed shortly. As MAX IV only has one Control and IT group, the same concept of machine and beamline installation have been applied also to the insertion devices, i.e. Sardana, Tango, PLC, and IcePAP integration. This has made a seamless integration possible to the rest of the facility in terms of user interfaces, alarm handling, archiving of status, and also future maintenance support.
	Poster MOPHA132 [4.755 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA132
About •	paper received ※ 30 September 2019 paper accepted ※ 11 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA045	Data Acquisition Strategy and Developments at MAX IV	1190
	M. Eguiraun, A. Amjad, P.J. Bell, A. Dupre, D.A. Erb, V.H. Hardion, N.A. Håkansson, A. Milan-Otero, J.F.J. Murari, E. Rosendahl MAX IV Laboratory, Lund University, Lund, Sweden
	The experimental capabilities at the MAX IV synchrotron consists of 17 beamlines at full capacity. Each beamline puts different requirements on the control system in terms of data acquisition, high performance, data volume, pre-processing needs, and fast experiment feedback and online visualization. Therefore, high demands are put on the data management systems, and the reliability and performance of these systems has a big impact on the overall success of the facility. At MAX IV we have started the DataStaMP (Data Storage and Management Project) with the aim of providing a unified and reliable solution for all data sources in our facility. This work presents the control system aspects of the project. It is initially aimed at providing data management solution for a selected number of detectors and beamlines. It is developed in a modular and scalable architecture and combines several programming languages and frameworks. All the software runs in a dedicated cluster and communicates with the experimental stations through high performance networks, using gRPC to talk to the control system and ZMQ for retrieving the data stream.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA045
About •	paper received ※ 17 September 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Control System Integration of MAX IV Insertion Devices

525

J. Lidón-Simon, N.S. Al-Habib, H.Y. Al-Sallami, A. Dupre, V.H. Hardion, M. Lindberg, P. Sjöblom, A. Thiel, G. Todorescu
MAX IV Laboratory, Lund University, Lund, Sweden

During the last 2.5 years, MAX IV have installed and commissioned in total 15 insertion devices out of which 6 are new in vacuum undulators, 1 in vacuum wiggler, and 7 in-house developed and manufactured Apple II elliptical polarized undulators. From the old lab, MAXLAB, 1 PU is also reused. Looking forward, 3 additional insertion devices will be installed shortly. As MAX IV only has one Control and IT group, the same concept of machine and beamline installation have been applied also to the insertion devices, i.e. Sardana, Tango, PLC, and IcePAP integration. This has made a seamless integration possible to the rest of the facility in terms of user interfaces, alarm handling, archiving of status, and also future maintenance support.

Poster MOPHA132 [4.755 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA132

About •

paper received ※ 30 September 2019 paper accepted ※ 11 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA045

Data Acquisition Strategy and Developments at MAX IV

1190

M. Eguiraun, A. Amjad, P.J. Bell, A. Dupre, D.A. Erb, V.H. Hardion, N.A. Håkansson, A. Milan-Otero, J.F.J. Murari, E. Rosendahl
MAX IV Laboratory, Lund University, Lund, Sweden

The experimental capabilities at the MAX IV synchrotron consists of 17 beamlines at full capacity. Each beamline puts different requirements on the control system in terms of data acquisition, high performance, data volume, pre-processing needs, and fast experiment feedback and online visualization. Therefore, high demands are put on the data management systems, and the reliability and performance of these systems has a big impact on the overall success of the facility. At MAX IV we have started the DataStaMP (Data Storage and Management Project) with the aim of providing a unified and reliable solution for all data sources in our facility. This work presents the control system aspects of the project. It is initially aimed at providing data management solution for a selected number of detectors and beamlines. It is developed in a modular and scalable architecture and combines several programming languages and frameworks. All the software runs in a dedicated cluster and communicates with the experimental stations through high performance networks, using gRPC to talk to the control system and ZMQ for retrieving the data stream.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA045

About •

paper received ※ 17 September 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)