JASRI/SPring-8, Hyogo, Japan
This study analyzes a pulse-mode x-ray beam position monitor that enables pulse-by-pulse position measurement in a synchrotron radiation beamline of the synchrotron radiation facility, SPring-8. The monitor is equipped with blade-shaped detection elements utilizing diamond heatsinks to reduce stray capacitance and a microstripline transmission line to improve high-frequency characteristics. The detection elements operate as photocathodes and generate single unipolar pulses with a full width at half-maximum of less than 1 ns, allowing pulse-by-pulse measurement of the synchrotron radiation beam. We confirmed the basic operation of the monitor at the SPring-8 bending magnet beamline*. The detection element’s heat resistance consequently improved. An evaluation test was carried out at the SPring-8 undulator beamline with significantly high synchrotron radiation intensity. We aim to report the evaluation results of the sensitivity and resolution of the monitor measured by exciting a betatron oscillation in the horizontal/vertical direction using beam shakers of the SPring-8 storage ring and the observation results of the pulse-by-pulse photon beam dynamics induced by beam injection.
* https://journals.aps.org/prab/pdf/10.1103/PhysRevAccelBeams.24.032803
