N. Milas, M. Akhyani, R.A. Baron, C.S. Derrez, M. Eshraqi, Y. Levinsen, R. Miyamoto, D. Noll, R. Tarkeshian, I. Vojskovic, R.H. Zeng
ESS, Lund, Sweden
The European Spallation Source (ESS), currently under construction and initial commissioning in Lund, Sweden, will be the brightest spallation neutron source in the world, when its driving proton linac achieves the design power of 5 MW at 2 GeV. Such a high power requires production, efficient acceleration, and almost no-loss transport of a high current beam, thus making design and beam commissioning of this machine challenging. During the the commissioning time in 2022 a campaign for a full characterisation of the ESS Medium Beta Transport session (MEBT) was carried out. Both transverse optics and longitudinal parameters were measured and compared to simulation, amongst them: buncher cavity tunning, trasnverse emittance and initial twiss parameters. In this paper we present the results and future plans.
please see instructions how to view/control embeded videos
Beam Instrumentation Performance During Commissioning of the ESS RFQ, MEBT and DTL
32
T.J. Shea, R.A. Baron, C.S. Derrez, E.M. Donegani, V. Grishin, H. Hassanzadegan, I. Kittelmann, H. Kocevar, N. Milas, D. Noll, H.A. Silva, R. Tarkeshian, C.A. Thomas
ESS, Lund, Sweden
I. Bustinduy
ESS Bilbao, Zamudio, Spain
M. Ferianis
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
T. Papaevangelou, L. Seguí
CEA-IRFU, Gif-sur-Yvette, France
In late 2021 through mid 2022, the first protons were accelerated and transported through the European Spallation Source (ESS) Radio Frequency Quadrupole and Medium Energy Transport line at 3.6 MeV, and finally through the first Drift Tube Linac tank at 21 MeV. To enable these achievements, the following beam instrumentation systems were deployed: Ion Source power supply monitors, beam chopping systems, Faraday Cups, Beam Current Monitors (BCM) and Beam Position Monitors (BPM) that also measured phase. Additional systems were deployed for dedicated studies, including Wire Scanners, a slit and grid Emittance Measurement Unit, neutron Beam Loss Monitors and fast BCM and BPM systems. The instrumentation deployment is the culmination of efforts by a partnership of the ESS beam diagnostics section, multiple ESS groups and institutes across the globe. This paper summarizes the beam tests that characterized the performance of the instrumentation systems and verified the achievement of commissioning goals.
First RF Phase Scans at the European Spallation Source
313
Y. Levinsen, R.A. Baron, E.M. Donegani, M. Eshraqi, A. Garcia Sosa, H. Hassanzadegan, B. Jones, N. Milas, R. Miyamoto, D. Noll, I. Vojskovic, R.H. Zeng
ESS, Lund, Sweden
M. Akhyani
EPFL, Lausanne, Switzerland
I. Bustinduy
ESS Bilbao, Zamudio, Spain
F. Grespan
INFN/LNL, Legnaro (PD), Italy
The installation and commissioning of the European Spallation Source is currently underway at full speed, with the goal to be ready for first neutron production by end of 2024. This year we accelerated protons through the first DTL tank. This included the RFQ, 3 buncher cavities in the medium energy beam transport as well as the DTL tank itself as RF elements. At the end of the DTL tank we had a Faraday cup acting as the effective beam stop. This marks the first commissioning when RF matching is required for beam transport. In this paper we discuss the phase scan measurements and analysis of the buncher cavities and the first DTL tank.