IBIC2022 - List of Authors (Kocevar, H.)

Paper	Title	Page
MOP07	Beam Instrumentation Performance During Commissioning of the ESS RFQ, MEBT and DTL	32
	T.J. Shea, R.A. Baron, C.S. Derrez, E.M. Donegani, V. Grishin, H. Hassanzadegan, I. Kittelmann, H. Kocevar, N. Milas, D. Noll, H.A. Silva, R. Tarkeshian, C.A. Thomas ESS, Lund, Sweden I. Bustinduy ESS Bilbao, Zamudio, Spain M. Ferianis Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy T. Papaevangelou, L. Seguí CEA-IRFU, Gif-sur-Yvette, France
	In late 2021 through mid 2022, the first protons were accelerated and transported through the European Spallation Source (ESS) Radio Frequency Quadrupole and Medium Energy Transport line at 3.6 MeV, and finally through the first Drift Tube Linac tank at 21 MeV. To enable these achievements, the following beam instrumentation systems were deployed: Ion Source power supply monitors, beam chopping systems, Faraday Cups, Beam Current Monitors (BCM) and Beam Position Monitors (BPM) that also measured phase. Additional systems were deployed for dedicated studies, including Wire Scanners, a slit and grid Emittance Measurement Unit, neutron Beam Loss Monitors and fast BCM and BPM systems. The instrumentation deployment is the culmination of efforts by a partnership of the ESS beam diagnostics section, multiple ESS groups and institutes across the globe. This paper summarizes the beam tests that characterized the performance of the instrumentation systems and verified the achievement of commissioning goals.
	Poster MOP07 [5.388 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-IBIC2022-MOP07
About •	Received ※ 30 August 2022 — Accepted ※ 15 September 2022 — Issue date ※ 07 November 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Instrumentation Performance During Commissioning of the ESS RFQ, MEBT and DTL

32

T.J. Shea, R.A. Baron, C.S. Derrez, E.M. Donegani, V. Grishin, H. Hassanzadegan, I. Kittelmann, H. Kocevar, N. Milas, D. Noll, H.A. Silva, R. Tarkeshian, C.A. Thomas
ESS, Lund, Sweden
I. Bustinduy
ESS Bilbao, Zamudio, Spain
M. Ferianis
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
T. Papaevangelou, L. Seguí
CEA-IRFU, Gif-sur-Yvette, France

In late 2021 through mid 2022, the first protons were accelerated and transported through the European Spallation Source (ESS) Radio Frequency Quadrupole and Medium Energy Transport line at 3.6 MeV, and finally through the first Drift Tube Linac tank at 21 MeV. To enable these achievements, the following beam instrumentation systems were deployed: Ion Source power supply monitors, beam chopping systems, Faraday Cups, Beam Current Monitors (BCM) and Beam Position Monitors (BPM) that also measured phase. Additional systems were deployed for dedicated studies, including Wire Scanners, a slit and grid Emittance Measurement Unit, neutron Beam Loss Monitors and fast BCM and BPM systems. The instrumentation deployment is the culmination of efforts by a partnership of the ESS beam diagnostics section, multiple ESS groups and institutes across the globe. This paper summarizes the beam tests that characterized the performance of the instrumentation systems and verified the achievement of commissioning goals.

Poster MOP07 [5.388 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-IBIC2022-MOP07

About •

Received ※ 30 August 2022 — Accepted ※ 15 September 2022 — Issue date ※ 07 November 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)