IBIC2022 - List of Authors (Balkova, Y.)

Paper	Title	Page
MOP22	Development of New Beam Position Detectors for the NA61/SHINE Experiment	84
	M.U. Urbaniak, Y. Balkova, S.K. Kowalski, S. Puławski, K.W. Wójcik University of Silesia in Katowice, Katowice, Poland
	NA61/SHINE is a fixed-target experiment located at CERN Super Proton Synchrotron. The development of new beam position detectors is part of the ongoing upgrade of the detector system. Two types of detectors have been manufactured and tested. The first one is a scintillating fibers detector with photomultiplier as a readout. The scintillating fibers detector consists of two ribbons, which are arranged perpendicularly to each other. Each ribbon is made of two layers of 250 µm diameter fibers. The grouping method was used, which allows using of a single multichannel photomultiplier for one detector. The second type of detector is based on the single-sided silicon strip detector (SSD). In this project, Si strips produced by Hamamatsu (S13804) were used, where the pitch has a width equal to 190 um. The developed detectors must meet several requirements: should work efficiently with proton and lead beams with beam intensity on the level of 100 kHz, the detector’s material on the beamline should be minimized, the detectors should be able to determine the position of X and Y hit of each beam particle with maximum possible accuracy. During my speech I will present the results of our work.
DOI •	reference for this paper ※ doi:10.18429/JACoW-IBIC2022-MOP22
About •	Received ※ 06 September 2022 — Revised ※ 09 September 2022 — Accepted ※ 12 September 2022 — Issue date ※ 13 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Development of New Beam Position Detectors for the NA61/SHINE Experiment

84

M.U. Urbaniak, Y. Balkova, S.K. Kowalski, S. Puławski, K.W. Wójcik
University of Silesia in Katowice, Katowice, Poland

NA61/SHINE is a fixed-target experiment located at CERN Super Proton Synchrotron. The development of new beam position detectors is part of the ongoing upgrade of the detector system. Two types of detectors have been manufactured and tested. The first one is a scintillating fibers detector with photomultiplier as a readout. The scintillating fibers detector consists of two ribbons, which are arranged perpendicularly to each other. Each ribbon is made of two layers of 250 µm diameter fibers. The grouping method was used, which allows using of a single multichannel photomultiplier for one detector. The second type of detector is based on the single-sided silicon strip detector (SSD). In this project, Si strips produced by Hamamatsu (S13804) were used, where the pitch has a width equal to 190 um. The developed detectors must meet several requirements: should work efficiently with proton and lead beams with beam intensity on the level of 100 kHz, the detector’s material on the beamline should be minimized, the detectors should be able to determine the position of X and Y hit of each beam particle with maximum possible accuracy. During my speech I will present the results of our work.

DOI •

reference for this paper ※ doi:10.18429/JACoW-IBIC2022-MOP22

About •

Received ※ 06 September 2022 — Revised ※ 09 September 2022 — Accepted ※ 12 September 2022 — Issue date ※ 13 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)