Paper | Title | Other Keywords | Page |
---|---|---|---|
WEBO03 | Development of MTCA.4-Based BPM Electronics for SPring-8 Upgrade | electron, electronics, FPGA, LLRF | 471 |
|
|||
We have developed a new button-BPM readout electronics based on the MTCA.4 standard for the low-emittance upgrade of SPring-8 [*]. Requirements for the BPM system are a high single-pass BPM resolution of better than 100 µm for a 100 pC injected bunch to achieve first-turn steering in the commissioning of the upgraded ring and a highly stable COD BPM within 5 µm error for 1 month to maintain the optical axis of brilliant x-rays for users [**]. We designed an rf front-end rear transition module (RTM) having band-pass filters, low-noise amplifiers, step attenuators, and calibration tone generators. The rf signal is detected by a 16-bit 370 MSPS high-speed digitizer advanced mezzanine card (AMC) developed for the new low-level rf system of SPring-8 [***]. The firmware of the FPGA on the digitizer AMC was newly developed to implement various functions of the BPM system. We evaluated the readout system at a laboratory and then tested at the present SPring-8 storage ring with a prototype BPM head for the SPring-8 upgrade. We confirmed that the new readout system satisfies the requirements for the single-pass BPM resolution and the COD BPM stability.
* SPring-8-II Conceptual Design Report, http://rsc.riken.jp/pdf/SPring-8-II.pdf ** H. Maesaka et al., Proc. IBIC¿18, paper TUOC04. *** T. Ohshima et al., Proc. IPAC¿17, paper THPAB117. |
|||
Slides WEBO03 [3.340 MB] | |||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEBO03 | ||
About • | paper received ※ 04 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019 | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||