Paper |
Title |
Other Keywords |
Page |
MOPP047 |
Design and Development of Beam Diagnostics for an FFA-FFA Ring for ISIS-II Upgrade Studies |
vacuum, simulation, detector, proton |
214 |
|
- E. Yamakawa
JAI, Oxford, United Kingdom
- S. Machida, A. Pertica, C.C. Wilcox
STFC/RAL/ISIS, Chilton, Didcot, Oxon, United Kingdom
|
|
|
The ISIS-II project aims to deliver a new spallation neu- tron source by 2034, driven by a 1.2 GeV proton accelerator capable of delivering a beam power of 1.25 MW with a rep- etition rate of 50 Hz or higher. One of the options for this future accelerator is a Fixed Field alternating gradient Accelerator (FFA). To demonstrate the suitability of FFAs for use in a user facility such as ISIS, there is a plan to construct a smaller scale proof of concept machine: FETS-FFA. Developing beam diagnostics for the FETS-FFA ring presents a challenge due to a large orbit excursion and aperture ( 60 mm x 700 mm). Diagnostics must cover the full size of beam chamber whilst still providing measurement sensitivity and resolution comparable to that seen in the ISIS synchrotron. This paper presents the current design and development of beam diagnostics for the FETS-FFA ring, including finite element studies of Beam Position Monitors (BPMs) and Ionisation Profile Monitors (IPMs).
|
|
|
Poster MOPP047 [9.355 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP047
|
|
About • |
paper received ※ 03 September 2019 paper accepted ※ 07 September 2019 issue date ※ 10 November 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TUPP020 |
Development of a Gated IPM System for J-PARC MR |
electron, detector, operation, impedance |
343 |
|
- K. Satou
J-PARC, KEK & JAEA, Ibaraki-ken, Japan
|
|
|
In the Main Ring (MR) of Japan Proton Accelerator Research Complex (J-PARC), a residual-gas ionization profile monitor (IPM) is used to measure bunched beam profiles. After injection, the beam widths of the first ~20 bunched beams are analysed to correct the Quadruple oscillation. While only a few dozen profiles are required for this correction, the present IPM auto-matically measures all bunched beams, more than 2·106 bunches from injection to the extraction, because the present IPM operates using DC. This system is unde-sirable due to the limited lifetime of the Micro Channel Plate (MCP) detector; the more particles the MCP senses, the more it loses gain flatness and thus lifetime. To improve this situation, a gated IPM system has been developed, in which the High Voltage (HV) is operated in pulse mode. Results of performance analysis of a new HV power supply, improvement of the electrodes, and particle-tracking simulation considering the space-charge-electric field of the bunched beam are de-scribed.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP020
|
|
About • |
paper received ※ 04 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|