The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Varnasseri, S. AU - Baron, R.A. AU - Bustinduy, I. AU - Conde, A. AU - Hassanzadegan, H. AU - Martin, J. AU - Ortega, A. AU - Rueda, I. AU - Shea, T.J. AU - Zugazaga, A.Z. ED - Schaa, Volker RW ED - Jansson, Andreas ED - Shea, Thomas ED - Olander, Johan TI - A Report on Developments of the BCM and BPM Pickups of the ESS MEBT J2 - Proc. of IBIC2019, Malmö, Sweden, 08-12 September 2019 CY - Malmö, Sweden T2 - International Beam Instrumentation Conferenc T3 - 8 LA - english AB - In the framework of the Spanish In-Kind Contribution (IKC) to the construction of the European Spallation Source (ESS-ERIC), ESS-Bilbao is in charge of providing some key systems for the accelerator. In this paper, design and pre-delivery measurements of non-interceptive devices of MEBT (e.g Beam Position Monitor pick-ups, shielded ACCT and FCT) are reported. Overall there are 8 BPMs distributed in MEBT, which 7 of them are used for the beam position and phase measurements and one BPM is used for the fast timing characterization. The latter is used mainly to characterize the partially chopped bunches and rise/fall time of the Beam Chopper. Furthermore there are two ACCTs, one just attached to the beam dump and the other at the last raft of the MEBT. One FCT combined with the second ACCT gives the complementary information on the fast timing characteristics of the beam pulses. PB - JACoW Publishing CP - Geneva, Switzerland SP - 539 EP - 542 KW - MEBT KW - pick-up KW - quadrupole KW - vacuum KW - impedance DA - 2019/11 PY - 2019 SN - 2673-5350 SN - 978-3-95450-204-2 DO - doi:10.18429/JACoW-IBIC2019-WEPP014 UR - http://jacow.org/ibic2019/papers/wepp014.pdf ER -