IBIC2017 - List of Authors (Alarcon, A.D.)

Paper	Title	Page
WEPCC16	First Experimental Results of the Commissioning of the SwissFEL Wire-Scanners	388
	G.L. Orlandi, A.D. Alarcon, S. Borrelli, A. Gobbo, P. Heimgartner, R. Ischebeck, D. Llorente Sancho, F. Löhl, C. Ozkan Loch, P. Pollet, B. Rippstein, V. Schlott PSI, Villigen PSI, Switzerland R. Vintar Cosylab, Ljubljana, Slovenia
	Several wire-scanners - 19 out of 22 - are presently installed in SwissFEL, the hard X-ray FEL facility under commissioning at Paul Scherrer Institut (www.psi.ch). Thanks to a wire-fork designed to be equipped with two different pairs of scanning wires (5 um tungsten and 12.5 um Al(99):Si(1)), high resolution measurements of the beam profile - and emittance - and, alternatively, a minimally-invasive beam monitoring during FEL operations can be performed. First experimental results of the SwissFEL wire-scanner commissioning will be presented as well as a summary of the prototyping design and characterization.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2017-WEPCC16
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

First Experimental Results of the Commissioning of the SwissFEL Wire-Scanners

388

G.L. Orlandi, A.D. Alarcon, S. Borrelli, A. Gobbo, P. Heimgartner, R. Ischebeck, D. Llorente Sancho, F. Löhl, C. Ozkan Loch, P. Pollet, B. Rippstein, V. Schlott
PSI, Villigen PSI, Switzerland
R. Vintar
Cosylab, Ljubljana, Slovenia

Several wire-scanners - 19 out of 22 - are presently installed in SwissFEL, the hard X-ray FEL facility under commissioning at Paul Scherrer Institut (www.psi.ch). Thanks to a wire-fork designed to be equipped with two different pairs of scanning wires (5 um tungsten and 12.5 um Al(99):Si(1)), high resolution measurements of the beam profile - and emittance - and, alternatively, a minimally-invasive beam monitoring during FEL operations can be performed. First experimental results of the SwissFEL wire-scanner commissioning will be presented as well as a summary of the prototyping design and characterization.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2017-WEPCC16

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)