IBIC2016 - List of Authors (Rybarcyk, L.)

Paper	Title	Page
TUPG79	LANSCE Isotope Production Facility Emittance Measurement System	548
	J.D. Sedillo, D. Baros, J.F. O'Hara, L. Rybarcyk, R.A. Valicenti, H.A. Watkins LANL, Los Alamos, New Mexico, USA
	A new beam diagnostic system for emittance measurement is under development for the Isotope Production Facility (IPF) beamline located at the Los Alamos Neutron Science Center (LANSCE). This system consists of two axes; each composed of a harp and slit actuation system for measuring the emittance of 41, 72, and 100-MeV proton beam energies. System design details and project status will be discussed with installation and commissioning of this system scheduled to conclude by February 2017.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-TUPG79
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPG31	Upgrades to the LANSCE Isotope Production Facilities Beam Diagnostics	690
	H.A. Watkins, D. Baros, D. Martinez, L. Rybarcyk, J.D. Sedillo, R.A. Valicenti LANL, Los Alamos, New Mexico, USA
	Funding: Work supported by the U.S. Department of Energy. Contract No. DE-AC52-06NA25396 The Los Alamos Neutron Science Center (LANSCE) is currently upgrading the beam diagnostics capability for the Isotope Production Facility (IPF) as part of an Accelerator Improvement Project (AIP). Improvements to measurements of: beam profile, beam energy, beam current and collimator charge are under development. Upgrades include high density harps, emittance slits, wire-scanners, multi-segment adjustable collimator, data acquisition electronics and motion control electronics. These devices will be installed and commissioned for the 2017 run cycle. Details of the hardware design and system development are presented.
	Poster WEPG31 [3.875 MB]
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-WEPG31
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

LANSCE Isotope Production Facility Emittance Measurement System

548

J.D. Sedillo, D. Baros, J.F. O'Hara, L. Rybarcyk, R.A. Valicenti, H.A. Watkins
LANL, Los Alamos, New Mexico, USA

A new beam diagnostic system for emittance measurement is under development for the Isotope Production Facility (IPF) beamline located at the Los Alamos Neutron Science Center (LANSCE). This system consists of two axes; each composed of a harp and slit actuation system for measuring the emittance of 41, 72, and 100-MeV proton beam energies. System design details and project status will be discussed with installation and commissioning of this system scheduled to conclude by February 2017.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-TUPG79

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPG31

Upgrades to the LANSCE Isotope Production Facilities Beam Diagnostics

690

H.A. Watkins, D. Baros, D. Martinez, L. Rybarcyk, J.D. Sedillo, R.A. Valicenti
LANL, Los Alamos, New Mexico, USA

Funding: Work supported by the U.S. Department of Energy. Contract No. DE-AC52-06NA25396
The Los Alamos Neutron Science Center (LANSCE) is currently upgrading the beam diagnostics capability for the Isotope Production Facility (IPF) as part of an Accelerator Improvement Project (AIP). Improvements to measurements of: beam profile, beam energy, beam current and collimator charge are under development. Upgrades include high density harps, emittance slits, wire-scanners, multi-segment adjustable collimator, data acquisition electronics and motion control electronics. These devices will be installed and commissioned for the 2017 run cycle. Details of the hardware design and system development are presented.

Poster WEPG31 [3.875 MB]

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-WEPG31

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)