IBIC2016 - List of Authors (Jimenez-Rey, D.)

Paper	Title	Page
MOPG32	Beam Diagnostics for the Multi-MW Hadron Linac IFMIF/DONES	111
	I. Podadera, B. Brañas, A. Guirao, A. Ibarra, D. Jiménez-Rey, E. Molina Marinas, J. Mollá, C. Oliver, R. Varela CIEMAT, Madrid, Spain P. Cara Fusion for Energy, Garching, Germany
	Funding: This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053 In the frame of the material research for future fusion reactors, the construction of a simplified facility of IFMIF, the so-called IFMIF/DONES* (Demo-Oriented Neutron Early Source), to generate sufficient material damage for the new design of DEMO . DONES will be a 40 MeV, 125 mA deuteron accelerator. The 5 MW beam will impact in a lithium flow target to yield a neutron source The detailed design of the DONES accelerator is being designed within EUROFUSION-WPENS project. One of the most critical tasks of the accelerator will be to identify the layout of beam diagnostics along the accelerator. This instrumentation must guarantee the high availability of the whole accelerator system and the beam characteristics and machine protection. This contribution will describe the beam diagnostics selected along the accelerator, focusing in the High Energy Beam Transport line, in charge of shaping the beam down to the high power target. The main open questions will be analyzed and the path to obtain the detailed design by the end of the project detailed. , IFMIF Intermediate Engineering Design Report *, DONES Conceptual Design Report, April 2014
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-MOPG32
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPG07	Commisioning of Beam Position and Phase Monitors for LIPAc	326
	I. Podadera, A. Guirao, D. Jiménez-Rey, L.M. Martínez, J. Mollá, A. Soleto, R. Varela CIEMAT, Madrid, Spain
	Funding: Work partially supported by the Spanish Ministry of Science and Innovation under project AIC-A-2011-0654 and FIS2013-40860-R The LIPAc accelerator will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF accelerator. Several types of Beam Position Monitors BPMs- are placed in each section of the accelerator to ensure a good beam transport and minimize beam losses. LIPAc is presently under installation and commissioning of the second acceleration stage at 5 MeV. In this stage two types of BPMs are used: four striplines to control the position at the Medium Energy Beam Transport line (MEBT), and three striplines to precisely measure the mean beam energy at the Diagnostics Plate. The seven pickups have been installed and assembled in the beamlines after characterization in a wire test bench, and are presently been commissioned in the facility. In addition, the in-house acquisition system has been fully developed and tested in the wire test bench at CIEMAT. In this contribution, the results of the beam position monitors characterization, the tests carried out during the assembly and the first measurements with the electronics system will be reported.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-TUPG07
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Diagnostics for the Multi-MW Hadron Linac IFMIF/DONES

111

I. Podadera, B. Brañas, A. Guirao, A. Ibarra, D. Jiménez-Rey, E. Molina Marinas, J. Mollá, C. Oliver, R. Varela
CIEMAT, Madrid, Spain
P. Cara
Fusion for Energy, Garching, Germany

Funding: This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053
In the frame of the material research for future fusion reactors, the construction of a simplified facility of IFMIF*, the so-called IFMIF/DONES** (Demo-Oriented Neutron Early Source), to generate sufficient material damage for the new design of DEMO . DONES will be a 40 MeV, 125 mA deuteron accelerator. The 5 MW beam will impact in a lithium flow target to yield a neutron source The detailed design of the DONES accelerator is being designed within EUROFUSION-WPENS project. One of the most critical tasks of the accelerator will be to identify the layout of beam diagnostics along the accelerator. This instrumentation must guarantee the high availability of the whole accelerator system and the beam characteristics and machine protection. This contribution will describe the beam diagnostics selected along the accelerator, focusing in the High Energy Beam Transport line, in charge of shaping the beam down to the high power target. The main open questions will be analyzed and the path to obtain the detailed design by the end of the project detailed.
*, IFMIF Intermediate Engineering Design Report
**, DONES Conceptual Design Report, April 2014

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-MOPG32

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPG07

Commisioning of Beam Position and Phase Monitors for LIPAc

326

I. Podadera, A. Guirao, D. Jiménez-Rey, L.M. Martínez, J. Mollá, A. Soleto, R. Varela
CIEMAT, Madrid, Spain

Funding: Work partially supported by the Spanish Ministry of Science and Innovation under project AIC-A-2011-0654 and FIS2013-40860-R
The LIPAc accelerator will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF accelerator. Several types of Beam Position Monitors BPMs- are placed in each section of the accelerator to ensure a good beam transport and minimize beam losses. LIPAc is presently under installation and commissioning of the second acceleration stage at 5 MeV. In this stage two types of BPMs are used: four striplines to control the position at the Medium Energy Beam Transport line (MEBT), and three striplines to precisely measure the mean beam energy at the Diagnostics Plate. The seven pickups have been installed and assembled in the beamlines after characterization in a wire test bench, and are presently been commissioned in the facility. In addition, the in-house acquisition system has been fully developed and tested in the wire test bench at CIEMAT. In this contribution, the results of the beam position monitors characterization, the tests carried out during the assembly and the first measurements with the electronics system will be reported.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-TUPG07

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)