FLS2018 - List of Authors (Dubuisson, J.M.)

Paper	Title	Page
THP2WD01	Construction and Optimization of Cryogenic Undulators at SOLEIL	193
	M. Valléau, P. Berteaud, F. Briquez, P. Brunelle, N. Béchu, M.-E. Couprie, J. Da Silva Castro, J.M. Dubuisson, A. Ghaith, C. Herbeaux, J. Idam, C.A. Kitegi, F. Lepage, A. Lestrade, M. Louvet, O. Marcouillé, F. Marteau, A. Mary, A. Nadji, L.S. Nadolski, P. Rommeluère, M. Sebdaoui, A. Somogyi, K.T. Tavakoli, M. Tilmont, T. Weitkamp SOLEIL, Gif-sur-Yvette, France
	Funding: Synchrotron SOLEIL, L'Orme des Merisiers, 91 192 BP 34 Gif-sur-Yvette, France, With permanent magnets undulator operation at cryogenic temperature, the magnetic field and the coercivity can be enhanced, enabling shorter periods with high magnetic fields. The first full scale (2 m long, 18 mm period) hybrid cryogenic undulator [1] using PrFeB [2] magnets operating at 77 K was installed at SOLEIL in 2011. Photon spectra measurements, in good agreement with the ex-pectations from magnetic measurements, were used for precise alignment and taper optimization. The second and third 18 mm PrFeB cryogenic undulators, modified to a half-pole/magnet/half-pole structure, were optimized without any magnet or pole shimming after assembly but mechanical sortings and some geometrical corrections had been done before assembly. A systematic error on individual magnets on the third U18 was also compensated. In-situ measurement benches, including a Hall probe and a stretched wire to optimize the undulator field at room and cryogenic temperature are presented. An upgrade of these in-situ benches will be detailed with the fabrication of a 15 mm 3 m long PrFeB cryogenic undulator at SOLEIL. [1] C. Benabderrahmane, M. Valléau, M. E. Couprie, Phys. Rev. Accel. Beams 20, 033201(2017) [2] C. Benabderrahmane, M. Valléau, M. E. Couprie, NIMA 669, 1-6, (2012)
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FLS2018-THP2WD01
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Construction and Optimization of Cryogenic Undulators at SOLEIL

193

M. Valléau, P. Berteaud, F. Briquez, P. Brunelle, N. Béchu, M.-E. Couprie, J. Da Silva Castro, J.M. Dubuisson, A. Ghaith, C. Herbeaux, J. Idam, C.A. Kitegi, F. Lepage, A. Lestrade, M. Louvet, O. Marcouillé, F. Marteau, A. Mary, A. Nadji, L.S. Nadolski, P. Rommeluère, M. Sebdaoui, A. Somogyi, K.T. Tavakoli, M. Tilmont, T. Weitkamp
SOLEIL, Gif-sur-Yvette, France

Funding: Synchrotron SOLEIL, L'Orme des Merisiers, 91 192 BP 34 Gif-sur-Yvette, France,
With permanent magnets undulator operation at cryogenic temperature, the magnetic field and the coercivity can be enhanced, enabling shorter periods with high magnetic fields. The first full scale (2 m long, 18 mm period) hybrid cryogenic undulator [1] using PrFeB [2] magnets operating at 77 K was installed at SOLEIL in 2011. Photon spectra measurements, in good agreement with the ex-pectations from magnetic measurements, were used for precise alignment and taper optimization. The second and third 18 mm PrFeB cryogenic undulators, modified to a half-pole/magnet/half-pole structure, were optimized without any magnet or pole shimming after assembly but mechanical sortings and some geometrical corrections had been done before assembly. A systematic error on individual magnets on the third U18 was also compensated. In-situ measurement benches, including a Hall probe and a stretched wire to optimize the undulator field at room and cryogenic temperature are presented. An upgrade of these in-situ benches will be detailed with the fabrication of a 15 mm 3 m long PrFeB cryogenic undulator at SOLEIL.
[1] C. Benabderrahmane, M. Valléau, M. E. Couprie, Phys. Rev. Accel. Beams 20, 033201(2017)
[2] C. Benabderrahmane, M. Valléau, M. E. Couprie, NIMA 669, 1-6, (2012)

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FLS2018-THP2WD01

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)