Rossi, A. R.

Paper	Title	Page
THAAU06	Parametric Optimization of a X-Ray FEL Based on a Thomson Source	517
	L. Serafini, A. Bacci, C. Maroli, V. Petrillo, A. R. Rossi INFN-Milano, Milano M. Ferrario INFN/LNF, Frascati (Roma)
	We present a study based on a parametric optimization for a Thomson Source operated in FEL mode. This deals with the proposed scheme to use a high energy laser pulse colliding with a high brightness electron beam of low to medium energy electrons undulating in the incoming laser field may emit in a FEL coherent mode as far as some conditions are satisfied. A set of simple analytical formulas taking into account 3D effects is derived to express these conditions in terms of three free parameters, namely the wavelength of the laser, the amplitude of the ripples in the laser field, and the peak current of the eletron beam. A few examples of possible operating points are compared with results of 3D numerical simulations, showing the FEL coherent emission of X-rays in the 0.1 to 5 nm range with tens of MeV high brightness electron beams coliding with high energy laser pulses.
	Talk
THPPH031	Commissioning of the SPARC Photo-Injector	637
	M. Bellaveglia, D. Alesini, S. Bertolucci, M. E. Biagini, R. Boni, M. Boscolo, M. Castellano, A. Clozza, L. Cultrera, G. Di Pirro, A. Drago, A. Esposito, M. Ferrario, L. Ficcadenti, D. Filippetto, V. Fusco, A. Gallo, G. Gatti, A. Ghigo, S. Guiducci, M. Incurvati, C. Ligi, M. Migliorati, A. Mostacci, L. Palumbo, L. Pellegrino, M. A. Preger, R. Ricci, C. Sanelli, F. Sgamma, B. Spataro, F. Tazzioli, C. Vaccarezza, M. Vescovi, C. Vicario INFN/LNF, Frascati (Roma) A. Bacci, I. Boscolo, F. Broggi, S. Cialdi, D. Giove, M. Mauri, A. R. Rossi, L. Serafini INFN-Milano, Milano L. Catani, E. Chiadroni, A. Cianchi, S. Tazzari INFN-Roma II, Roma L. Giannessi, M. Quattromini, A. Renieri, C. Ronsivalle ENEA C. R. Frascati, Frascati (Roma) M. Mattioli, P. Musumeci, M. Petrarca INFN-Roma, Roma A. Perrone INFN-Lecce, Lecce J. B. Rosenzweig UCLA, Los Angeles, California
	The SPARC project is born to perform R&D activity headed to realize SASE-FEL experiments at 500nm and higher harmonic generation. The project foresees the realization of a high brightness photo-injector able to produce a 150-200MeV electron beam to drive FEL process inside a dedicated 14m long undulator. The machine is going to be assembled at LNF and its final configuration is made up of an RF gun, driven by a Ti:Sa laser, injecting into three SLAC type accelerating sections. Nowadays we are working in a photo-injector test phase, aiming to characterize the main hardware components and to investigate the behavior of the e-beam dynamics in the first meters of drift. To do this we utilize the emittance-meter, a home designed diagnostic device placed just after the RF gun, able to move 1.2 meters along the longitudinal axis to measure beam parameters. In this paper we report a more accurate description of the project, the status of the single systems constituting the machine and the most important results we obtained in the e-meter phase.