Ferianis, M.
| Paper | Title | Page |
|---|---|---|
| MOPP039 | Present Performance and Future Requirements of the RF Plants for the FERMI Project | 126 |
|
||
|
The VUV soft x-ray FEL user facility, FERMI@Elettra, will use the existing 1.2 GeV linac to produce, in two separate phases, 100-40 nm and 40-10 nm, intense photon beams with single stage and double stage harmonic generation schemes respectively. To fulfill the stringent requirements of the project the present RF systems will be completely revised and upgraded. The work presented here describes the present performances of the system and plans for the linac upgrades to meet the required system specifications for FEL operation. |
||
| MOPP041 | Generation and Distribution of Stable Timing Signals to Synchronize RF and Lasers at the FERMI FEL Facility | 134 |
|
||
|
Fermi is the fourth generation light source that is currently being designed at ELETTRA, in the frame of a collaboration that includes LBNL and MIT. The timing system will play a crucial role in achieving the expected performance of this and other Linac based FELs due to the sub-ps electron bunch length and the expanded use of fs-lasers as key components in future light sources. Furthermore, the requirements of the timing system are also tightly linked to the applications of the generated ultrafast x-ray pulses. In this paper we present the requirements for the FERMI timing system, which will be based on optical timing distribution concepts, currently seen to be the only technique to enable an RMS jitter at the 10fs level. The timing system, intended for a user facility that is operated on a 24-h, 7-d basis, must operate stable and reliable. The fundamental components of the system are analyzed, such as the optical reference oscillator, the fiber optic stabilized links and the local optical to electrical (O/E) converters, needed for the RF plant synchronization. Furthermore, solutions for the synchronization of the diagnostic tools for the Linac as well as user related synchronization issues are presented and discussed. |
||
| THPP045 | Advanced Electron Beam Diagnostics for the FERMI FEL | |
|
||
|
Fermi is the fourth generation light source currently under design at ELETTRA: based on the Harmonic Generation (HG) scheme it will generate FEL radiation in the 100-10nm range. The successful implementation of the HG scheme calls also for precise knowledge of electron beam emittances and energy spread as well as for very accurate control on the photon to electron interaction, in the Undulator sections. In this paper we present our design for two fundamental Diagnostics foreseen for the new FERMI LINAC: the Beam Position Monitors (BPM) and the Transverse Deflecting cavity set-up. Sensitivity studies on transverse beam displacement effects on global stability of FEL output radiation dictate the ultimate performance to be provided by the BPM system. Due to non negligible longitudinal occupancy of a cavity type BPM, some efforts have been put to study compact cavity BPM configuration. A proper set-up of RF deflecting cavity combined with the vertical ramp foreseen at the end of the LINAC provide a powerful tool for multiple beam measurement. Furthermore, by implementing the two bunch compressors in the vertical plane the effect of the Coherent Synchrotron Radiation (CSR) on the vertical emittance can be checked for. |
||
| THPP068 | Electron Beam Diagnostic Based on a Short Seeded FEL | |
|
||
|
The optical properties of an FEL amplifier are sensitively dependent on the electron beam current profile, energy spread, and transverse emittance. In this paper we consider using a short FEL amplifier operating on a low harmonic of a visible-IR input seed as a mildly destructive electron beam diagnostic able to measure these properties for sub-ps time slices. The optical methods are described as well as a planned implementation of the device for the FERMI@Elettra XUV FEL under construction at Sincrotrone Trieste, including its fiber-based seed laser closely coupled with the facility timing system, undulator parameters, and requirements on the electron and FEL pulses. This diagnostic is conveniently integrated with a "laser heater" designed to increase the very low electron beam energy spread produced by a photoinjector in order to avoid space charge and coherent synchrotron radiation instabilities. |
||
| FROA003 | FERMI @ Elettra: A Seeded Harmonic Cascade FEL for EUV and Soft X-Rays | 682 |
|
||
|
We describe the machine layout and major performance parameters for the FERMI FEL project funded for construction at Sincrotrone Trieste, Italy. The project will be the first user facility based on seeded harmonic cascade FELs, providing controlled, high peak-power pulses. With a high-brightness rf photocathode gun, and using the existing 1.2 GeV S-band linac, the facility will provide tunable output over a range from ~100 nm to ~10 nm, with pulse duration from 40 fs to ~ 1ps, and with fully variable output polarization. Initially, two FEL cascades are planned; a single-stage harmonic generation to operate > 40 nm, and a two-stage cascade operating from ~40 nm to ~10 nm or shorter wavelength. The output is spatially and temporally coherent, with peak power in the GW range. Lasers provide modulation to the electron beam, as well as driving the photocathode and other systems, and the facility will integrate laser systems with the accelerator infrastructure, including a state-of-the-art optical timing system providing synchronization of rf signals, lasers, and x-ray pulses. Major systems and overall facility layout are described, and key performance parameters summarized. |
||