Chiadroni, E.
Paper | Title | Page |
---|---|---|
MOPP033 | Detector Response and Beam Line Transmission Measurements with Far-Infrared Radiation | 106 |
|
||
Various activities at the TTF linear accelerator at DESY, Hamburg, that drives the VUV-FEL are geared towards measuring the longitudinal charge distribution of electron bunches with coherent far-infrared radiation. Examples are beam lines transporting synchrotron or transition radiation to interferometers mounted inside or outside the tunnel, and studies of single-shot grating spectrometers. All such approaches require a good understanding of the radiation generation and transport mechanism and of the detector characteristics to extract useful information on the charge distribution. Simulations and measurements of the expected transverse intensity distribution and polarization of synchrotron radiation emitted at the first bunch compressor of TTF have been performed. The transverse intensity scanning provided for the first time at DESY a visual image of the footprint of terahertz radiation. Detector response measurements have been performed at the FELIX facility, Netherlands, for wavelengths between 100-160 microns, and first studies with blackbody radiation and band pass filters in the terahertz regime have been done at PTB, Berlin. The paper will summarize these results. |
||
THPP043 | Status and First Results from the Upgraded PITZ Facility | 564 |
|
||
Funding: This work has been partly supported by the European Community, contract numbers RII3-CT-2004-506008 and 011935, and by the 'Impuls- und Vernetzungsfonds" of the Helmholtz Association, contract number VH-FZ-05. Since December 2004, the photo injector test facility at DESY in Zeuthen (PITZ) has been upgraded. A normal conducting copper booster cavity has been installed and the diagnostics beamline has been strongly modified. An extended water cooling system has been installed and was successfully taken into operation. Actually, the new diagnostics elements are being commissioned. After the installation of the new 10 MW klystron in June/July, the gun can be conditioned towards higher average power, and the whole beamline including the booster will be taken into operation. First results from the commissioning phase including gun and booster conditioning are reported. |
||
THPP073 | Commissioning of the SPARC Movable Emittance Meter and Its First Operation at PITZ | 652 |
|
||
For the SPARC Project a novel diagnostic device, called "Emittance-meter", has been conceived and constructed to perform a detailed study of the emittance compensation process in the SPARC photo-injector and to optimize the RF-gun and the accelerator working point. It consists of a movable emittance measurement system, based on the 1D pepper-pot method, installed between two long bellows with the possibility to scan a region 1.5 m long downstream the RF-gun. The construction of the device was completed in the first part of this year and a series of laboratory tests, to evaluate its performances, were carried out in Spring 2005. At the beginning of the summer the complete system was moved to DESY at Zeuthen to be installed on the Photo Injector Test Facility PITZ. After the commissioning it will used for measurements of the PITZ electron beam in the framework of a collaboration between the SPARC and PITZ Projects aiming on studies and operations with photo injectors. |
||
THPP019 | Status of the SPARX FEL Project | 491 |
|
||
The first phase of the SPARX project, now funded by MIUR (Research Department of Italian Government), is an R&D activity focused on developing techniques and critical components for future X-ray FEL facilities. This project is the natural extension of the activities under development within the ongoing SPARC collaboration. The aim is the generation of electron beams characterized by an ultra-high peak brightness with a linear accelerator based on the upgrade of the existing Frascati 800 MeV LINAC and to drive a single pass FEL experiment in the range of 3-5 nm, both in SASE and SEEDED FEL configurations, exploiting the use of superconducting and exotic undulator sections. In this paper we discuss the present status of the collaboration. |
||