DESY, Hamburg
PETRA III is a new hard x-ray synchrotron radiation source which will be operated at 6 GeV with an extremely low horizontal emittance of 1 nmrad. This new facility is the result of a conversion of the existing storage ring PETRA II into a light source. The conversion comprises the complete rebuilding of one eighth of the 2304 m long storage ring, which will then house 14 undulator beam lines, the optical and experimental hutches, and the modernization and refurbishment of the remaining seven eighths. In addition two 100 m long damping wiggler sections have been installed which are required to achieve the small design emittance. Construction, installation and technical commissioning have been finished middle of March and then the commissioning with beam started. In this paper we present the results that have been achieved during commissioning with special emphasis on the role of diagnostic systems.
DESY, Hamburg
The basic design for the machine protection system (MPS) for the light-source PETRA III is discussed. High synchrotron radiation can damage absorbers and vacuum chambers. Therefore the MPS identifies alarm conditions from different systems, including the BPM, temperature and vacuum systems and creates a dump command within 100us. For diagnostic purposes a post-mortem trigger is implemented and a first alarm detection is planned. The initial commissioning of the MPS with its alarm-delivering systems is described.