• A.E. Lokhovitskiy, A. Guerrero, J. Koopman
  CERN, Geneva

During the 2008/2009 shutdown the electronics for the Fast Wire-scanners for the CERN PSB and PS machines will be renovated with new movement and acquisition electronics. A new test bench was produced that allows measuring the movement of wires at speeds up to 20 m/s. This poster will present the calibration system with its related software.

• M. Sapinski, B. Dehning, A. Guerrero, J. Koopman, E. Métral
  CERN, Geneva

Carbon fibres are commonly used as moving targets in Beam Wire Scanners. Because of their thermo mechanical properties they are very resistant to particle beams. Their strength deteriorates with time due to low-cycle thermal fatigue. In case of high intensity beams this process can accelerate and in extreme cases the fibre is damaged during a scan. In this work a model describing the fibre temperature, thermionic emission and sublimation is discussed. Results are compared with fibre damage test performed on the CERN SPS beam in November 2008. For the operation of Wire Scanners with high intensity beams damage threshold are predicted.