Paper | Title | Page |
---|---|---|
MOPD25 | TheTransverse and Longitudinal Beam Characteristics of the PHIN Photo-Injector at CERN | 104 |
|
||
Within the framework of the second Joint Research Activity PHIN of the European CARE program, a new photo injector for CTF3 drive beam has been designed and installed by collaboration between LAL, CCLRC and CERN. The laser driven rf photo injectors are recent candidates for high-brightness, low-emittance electron sources. One of the main beam dynamics issues for a high brightness electron source is the optimization of beam envelope behavior in the presence of the space charge force in order to get low emittance. Beam based measurements have been made during the commissioning runs of the PHIN 2008 and 2009 including measurements of the emittance, using multi-slits technique. In this work the photo injector will be described and the first beam measurement results will be presented and compared with the PARMELA simulations. |
||
TUPB40 | Time Resolved Spectrometry on the Test Beam Line at CTF3 | 257 |
|
||
The CTF3 provides high current (28A) high frequency (12GHz) electron beams, which are used to generate high power radiofrequency pulses at 12GHz by decelerating the electrons in resonant structures. A Test Beam Line (TBL) is currently being built in order to prove the efficiency and the reliability of the RF power production with the lowest level of particle losses. As the beam propagates along the line, its energy spread grows up to 60%. For instrumentation, this unusual characteristic implies the developments of new and innovative techniques. One of the most important tasks is to measure the beam energy spread with a fast time resolution. The detector must be able to detect the energy transient due to beam loading in the decelerating structures (nanosecond) but should also be capable to measure bunch to bunch fluctuations (12GHz). This paper presents the design of the spectrometer line detectors. |