| Paper |
Title |
Page |
| THPMA043 |
Development of 3 MeV, 30 kW DC Electron Accelerator at EBC, Kharghar
|
682 |
| |
- K. C. Mittal, S. Acharya, R. Agarwal, R. Barnwal, D. P. Chakravarthy, A. S. Chawala, A. R. Chindarkar, S. R. Ghodke, B. S. Israel, A. Jain, D. Jayaprakash, M. K. Kumar, M. K. Kumar, R. L. Mishra, K. V. Nagesh, K. Nanu, M. K. Pandey, G. P. Puthran, R. N. Rajan, S. R. Raul, A. K. Ray, P. C. Saroj, D. K. Sharma, V. Sharma, R. Shilendra, S. K. Suneet, S. B. Supriya, D. P. Suryaprakash
BARC, Mumbai
|
|
| |
A 3 MeV, 30 kW DC industrial electron accelerator has been designed and is in advanced stage of development at EBC, Kharghar, Navi Mumbai. Electron beam at 5 keV is generated in electron gun with LaB6 cathode and is injected into accelerating column at a vacuum of 10-7 torr. After acceleration, the beam is scanned and taken out in air through a 100 cm X 7 cm titanium window for radiation processing applications. The high voltage accelerating power supply is based on a capacitive coupled parallel fed voltage multiplier scheme operating at 120 kHz. A 50 kW oscillator feeds power to high voltage multiplier column. The electron gun, accelerating column and high voltage multiplier column are housed in accelerator tank filled with SF6 gas insulation at 6 kg/sq.cm. The accelerator is located in a RCC building with product conveyor for handling products. A central computerized control system is adopted for operation of the accelerator. Accelerator is in the advance stage of commissioning. This paper describes the design details and current status of the accelerator and its various subsystems.
|
|
| THPMA094 |
SF6 Gas Handling System for 3 MeV, 30 kW Industrial Electron Beam Accelerator at EBC, Kharghar, Navi Mumbai
|
779 |
| |
- S. R. Ghodke, K. K. Abdullah, R. Barnwal, D. P. Chakravarthy, D. Jayaprakash, M. K. Kumar, N. Lawangare, R. L. Mishra, K. C. Mittal, K. Nanu, G. P. Puthran, A. K. Ray, S. B. Supriya, V. S. Veer
BARC, Mumbai
|
|
| |
The 3 MeV Accelerator Project involves designing, fabrication, installation and commissioning of a 3 MeV, 30 kW Industrial Electron Beam Accelerator with a terminal voltage of 3 MV and is housed inside the Electron Beam Centre building at Kharghar, Navi Mumbai. The Accelerator has capability of delivering electron beam of 3 MeV energy for radiation processing applications. For ecological and economical reason, the SF6 gas is reincorporated into closed cycle because gas should not be released into the atmosphere. The aim of the SF6 gas handling system is to introduce the gas at high pressure to the accelerator tank after evacuation and to bring back into the storage tanks with minimum loss. The gas handling system also provides purification of gas, prevention from mixing with air or any other substances, which may contaminate and thus bring down the high voltage insulation characteristics of the gas. This paper discusses about mechanical design, fabrication, testing and safety of different components of SF6 gas handling system such as gas piping, non lubricating compressor, dryer, vacuum pump, dust & oil filters, storage tanks etc.
|
|