SRF2013 - List of Authors (Yamazaki, Y.)

Paper	Title	Page
MOP013	SRF Developments at MSU for FRIB	106
	K. Saito, N.K. Bultman, F. Casagrande, S. Chouhan, C. Compton, K. Elliott, A. Facco, M.J. Johnson, S. Jones, M. Leitner, S.J. Miller, R. Oweiss, J.P. Ozelis, J. Popielarski, L. Popielarski, S. Shanab, J. Wei, T. Xu, Y. Yamazaki, Y. Zhang, Z. Zheng FRIB, East Lansing, Michigan, USA S.K. Chandrasekaran MSU, East Lansing, USA K. Hosoyama KEK, Ibaraki, Japan
	FRIB has built up a new SRF development group for future SRF research and development at MSU. This paper will report on the present status of development for fundamental couplers, pneumatic tuners for HWR, magnetic shielding and superconducting solenoids, barrel polishing techniques for HWR, a cavity steam cleaning method, and niobium material characterization efforts.

THP046	Magnetic Material Characterization & SC Solenoid Coil Package Design for FRIB	1009
	K. Saito, S. Chouhan, C. Compton, J. DeKamp, M. Leitner, F. Marti, J.P. Ozelis, S. Shanab, G.J. Velianoff, X. Wu, Y. Yamazaki, A. Zeller, Y. Zhang, Q. Zhao FRIB, East Lansing, Michigan, USA S.K. Chandrasekaran MSU, East Lansing, USA K. Hosoyama KEK, Ibaraki, Japan
	To date SRF technology is extending to large scale heavy ion LINACs, where SRF cavities accelerate beams from very low energy to high energy. In this application, superconducting (SC) solenoids are installed inside the cryomodule to provide strong beam focusing with enhanced space efficiency. FRIB will use local magnetic shielding, where magnetic shielding by Cryoperm or A4K is located close to the cavity at 2K. In this scheme rather strong magnetic fringe fields from the SC solenoid expose the shielding material and will magnetize it. An efficient degaussing process is required as cure against such magnetization. Magnetic material characterization of magnetic shielding materials is very important to be able to plan effective degaussing procedures. The paper will also discuss the design of FRIB solenoids optimized for cost, reliability, and robust long-term operation. NbTi wire performance criteria are discussed in addition to solenoid operational margins.

Paper

Title

Page

SRF Developments at MSU for FRIB

106

K. Saito, N.K. Bultman, F. Casagrande, S. Chouhan, C. Compton, K. Elliott, A. Facco, M.J. Johnson, S. Jones, M. Leitner, S.J. Miller, R. Oweiss, J.P. Ozelis, J. Popielarski, L. Popielarski, S. Shanab, J. Wei, T. Xu, Y. Yamazaki, Y. Zhang, Z. Zheng
FRIB, East Lansing, Michigan, USA
S.K. Chandrasekaran
MSU, East Lansing, USA
K. Hosoyama
KEK, Ibaraki, Japan

FRIB has built up a new SRF development group for future SRF research and development at MSU. This paper will report on the present status of development for fundamental couplers, pneumatic tuners for HWR, magnetic shielding and superconducting solenoids, barrel polishing techniques for HWR, a cavity steam cleaning method, and niobium material characterization efforts.

THP046

Magnetic Material Characterization & SC Solenoid Coil Package Design for FRIB

1009

K. Saito, S. Chouhan, C. Compton, J. DeKamp, M. Leitner, F. Marti, J.P. Ozelis, S. Shanab, G.J. Velianoff, X. Wu, Y. Yamazaki, A. Zeller, Y. Zhang, Q. Zhao
FRIB, East Lansing, Michigan, USA
S.K. Chandrasekaran
MSU, East Lansing, USA
K. Hosoyama
KEK, Ibaraki, Japan

To date SRF technology is extending to large scale heavy ion LINACs, where SRF cavities accelerate beams from very low energy to high energy. In this application, superconducting (SC) solenoids are installed inside the cryomodule to provide strong beam focusing with enhanced space efficiency. FRIB will use local magnetic shielding, where magnetic shielding by Cryoperm or A4K is located close to the cavity at 2K. In this scheme rather strong magnetic fringe fields from the SC solenoid expose the shielding material and will magnetize it. An efficient degaussing process is required as cure against such magnetization. Magnetic material characterization of magnetic shielding materials is very important to be able to plan effective degaussing procedures. The paper will also discuss the design of FRIB solenoids optimized for cost, reliability, and robust long-term operation. NbTi wire performance criteria are discussed in addition to solenoid operational margins.