SRF2013 - List of Authors (Xu, T.)

Paper

Title

Page

The FRIB Project at MSU

1

M. Leitner, B. Bird, F. Casagrande, S. Chouhan, C. Compton, J.L. Crisp, K. Elliott, A. Facco, A.D. Fox, M. Hodek, M.J. Johnson, G. Kiupel, I.M. Malloch, D. Miller, S.J. Miller, D. Morris, D. Norton, R. Oweiss, J.P. Ozelis, J. Popielarski, L. Popielarski, A.P. Rauch, R.J. Rose, K. Saito, M. Shuptar, N.R. Usher, G.J. Velianoff, D.R. Victory, J. Wei, J. Whitaker, K. Witgen, T. Xu, Y. Xu, O. Yair, S. Zhao
FRIB, East Lansing, Michigan, USA

Funding: This material is based upon work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661.
The Facility for Rare Isotope Beams (FRIB) is ready to start construction. The facility will utilize a high-intensity, heavy-ion driver linac to provide stable ion beams from protons to uranium up to energies of >200 MeV/u and at a beam power of up to 400 kW. The superconducting cw linac consists of 330 individual low-beta (β = 0.041, 0.085, 0.29, and 0.53 at 80.5 MHz and 322 MHz) cavities in 49 cryomodules operating at 2 K. This paper discusses the current development status of the project with emphasis on the linac SRF acquisition. SRF coldmass and cryomodule component designs are briefly summarized. A SRF production facility, currently under construction, is described.

Slides MOIOA01 [9.804 MB]

MOP013

SRF Developments at MSU for FRIB

106

K. Saito, N.K. Bultman, F. Casagrande, S. Chouhan, C. Compton, K. Elliott, A. Facco, M.J. Johnson, S. Jones, M. Leitner, S.J. Miller, R. Oweiss, J.P. Ozelis, J. Popielarski, L. Popielarski, S. Shanab, J. Wei, T. Xu, Y. Yamazaki, Y. Zhang, Z. Zheng
FRIB, East Lansing, Michigan, USA
S.K. Chandrasekaran
MSU, East Lansing, USA
K. Hosoyama
KEK, Ibaraki, Japan

FRIB has built up a new SRF development group for future SRF research and development at MSU. This paper will report on the present status of development for fundamental couplers, pneumatic tuners for HWR, magnetic shielding and superconducting solenoids, barrel polishing techniques for HWR, a cavity steam cleaning method, and niobium material characterization efforts.

Paper	Title	Page
MOIOA01	The FRIB Project at MSU	1
	M. Leitner, B. Bird, F. Casagrande, S. Chouhan, C. Compton, J.L. Crisp, K. Elliott, A. Facco, A.D. Fox, M. Hodek, M.J. Johnson, G. Kiupel, I.M. Malloch, D. Miller, S.J. Miller, D. Morris, D. Norton, R. Oweiss, J.P. Ozelis, J. Popielarski, L. Popielarski, A.P. Rauch, R.J. Rose, K. Saito, M. Shuptar, N.R. Usher, G.J. Velianoff, D.R. Victory, J. Wei, J. Whitaker, K. Witgen, T. Xu, Y. Xu, O. Yair, S. Zhao FRIB, East Lansing, Michigan, USA
	Funding: This material is based upon work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661. The Facility for Rare Isotope Beams (FRIB) is ready to start construction. The facility will utilize a high-intensity, heavy-ion driver linac to provide stable ion beams from protons to uranium up to energies of >200 MeV/u and at a beam power of up to 400 kW. The superconducting cw linac consists of 330 individual low-beta (β = 0.041, 0.085, 0.29, and 0.53 at 80.5 MHz and 322 MHz) cavities in 49 cryomodules operating at 2 K. This paper discusses the current development status of the project with emphasis on the linac SRF acquisition. SRF coldmass and cryomodule component designs are briefly summarized. A SRF production facility, currently under construction, is described.
	Slides MOIOA01 [9.804 MB]

MOP013	SRF Developments at MSU for FRIB	106
	K. Saito, N.K. Bultman, F. Casagrande, S. Chouhan, C. Compton, K. Elliott, A. Facco, M.J. Johnson, S. Jones, M. Leitner, S.J. Miller, R. Oweiss, J.P. Ozelis, J. Popielarski, L. Popielarski, S. Shanab, J. Wei, T. Xu, Y. Yamazaki, Y. Zhang, Z. Zheng FRIB, East Lansing, Michigan, USA S.K. Chandrasekaran MSU, East Lansing, USA K. Hosoyama KEK, Ibaraki, Japan
	FRIB has built up a new SRF development group for future SRF research and development at MSU. This paper will report on the present status of development for fundamental couplers, pneumatic tuners for HWR, magnetic shielding and superconducting solenoids, barrel polishing techniques for HWR, a cavity steam cleaning method, and niobium material characterization efforts.