SRF2013 - List of Authors (Thie, J.H.)

Paper

Title

Page

The Statistics of Industrial XFEL Cavities Fabrication at E.ZANON

180

A. Gresele, M. Giaretta, A. Visentin
Ettore Zanon S.p.A., Nuclear Division, Schio, Italy
A.A. Sulimov, J.H. Thie
DESY, Hamburg, Germany

Serial production of superconducting cavities for European-XFEL was successfully started at E.ZANON at the end of last year. The production rate (3-4 cavities a week) allows us to summarize the results and present the statistics of industrial cavity fabrication. Many parameters have been traced during different steps of cavity production. The most interesting of them, as cavity length, frequency, field flatness and eccentricity, are presented and discussed. The last results of new preparation cycles development in the frame of E-XFEL projects is also included

MOP035

Using an Engineering Data Management System for Series Cavity Production for the European XFEL

183

J. Iversen, A. Brinkmann, J.A. Dammann, A. Poerschmann, W. Singer, J.H. Thie
DESY, Hamburg, Germany

For series production of 800 superconducting cavities for the European XFEL an Engineering Data Management System (EDMS) is in use as a tool for quality control and quality assurance. DESY is responsible for “in-time” supply of more than 24000 semi-finished products of niobium and niobium-titanium alloy. The EDMS as a main repository was set up to fulfill logistic requirements and to guarantee traceability and documentation issues according to the European pressure equipment directive (PED 97/23 EC). The main aspects consist of complete paperless documentation, fully automated transfer of quality management documents and data from vendor system to DESY’s EDMS, providing to industry an access to relevant documentation and processing of release procedures for acceptance levels and non-conformity reporting. A summary of documentation methods, procedures and first experiences will be presented.

MOP051

The Statistics of Industrial XFEL Cavities Fabrication at Research Instruments

234

A.A. Sulimov, J.H. Thie
DESY, Hamburg, Germany
M. Pekeler, D. Trompetter
RI Research Instruments GmbH, Bergisch Gladbach, Germany

Serial production of superconducting cavities for European-XFEL was successfully started at Research Instrument (RI) at the end of last year. The production rate (3-4 cavities a week) allows us to summarize the results and present the statistics of industrial cavity fabrication. Many parameters have been traced during different steps of cavity production. The most interesting of them, as cavity length, frequency, field flatness and eccentricity, are presented and discussed.

Poster MOP051 [0.769 MB]

Paper	Title	Page
MOP034	The Statistics of Industrial XFEL Cavities Fabrication at E.ZANON	180
	A. Gresele, M. Giaretta, A. Visentin Ettore Zanon S.p.A., Nuclear Division, Schio, Italy A.A. Sulimov, J.H. Thie DESY, Hamburg, Germany
	Serial production of superconducting cavities for European-XFEL was successfully started at E.ZANON at the end of last year. The production rate (3-4 cavities a week) allows us to summarize the results and present the statistics of industrial cavity fabrication. Many parameters have been traced during different steps of cavity production. The most interesting of them, as cavity length, frequency, field flatness and eccentricity, are presented and discussed. The last results of new preparation cycles development in the frame of E-XFEL projects is also included

MOP035	Using an Engineering Data Management System for Series Cavity Production for the European XFEL	183
	J. Iversen, A. Brinkmann, J.A. Dammann, A. Poerschmann, W. Singer, J.H. Thie DESY, Hamburg, Germany
	For series production of 800 superconducting cavities for the European XFEL an Engineering Data Management System (EDMS) is in use as a tool for quality control and quality assurance. DESY is responsible for “in-time” supply of more than 24000 semi-finished products of niobium and niobium-titanium alloy. The EDMS as a main repository was set up to fulfill logistic requirements and to guarantee traceability and documentation issues according to the European pressure equipment directive (PED 97/23 EC). The main aspects consist of complete paperless documentation, fully automated transfer of quality management documents and data from vendor system to DESY’s EDMS, providing to industry an access to relevant documentation and processing of release procedures for acceptance levels and non-conformity reporting. A summary of documentation methods, procedures and first experiences will be presented.

MOP051	The Statistics of Industrial XFEL Cavities Fabrication at Research Instruments	234
	A.A. Sulimov, J.H. Thie DESY, Hamburg, Germany M. Pekeler, D. Trompetter RI Research Instruments GmbH, Bergisch Gladbach, Germany
	Serial production of superconducting cavities for European-XFEL was successfully started at Research Instrument (RI) at the end of last year. The production rate (3-4 cavities a week) allows us to summarize the results and present the statistics of industrial cavity fabrication. Many parameters have been traced during different steps of cavity production. The most interesting of them, as cavity length, frequency, field flatness and eccentricity, are presented and discussed.
	Poster MOP051 [0.769 MB]