| |
While trying to find an optimal way to configure cryomodule for the low energy part of a high-current, high-power superconducting linac, an option of using conductively cooled superconducting focusing lenses was evaluated. As part of this evaluation, several tests were made using existing test cryostat. The cryostat was modified by adding current feed-throughs and two conductively cooled current leads, each equipped with heat sinks at the temperatures of liquid nitrogen and liquid helium. A superconducting magnet was mounted inside the cryostat on an individual heat sink, and thermometers were installed on the leads, heat sinks, and on the magnet’s winding. In this report we provide some details of the heat exchangers’ designs, compare predicted and measured temperature distribution along the leads, and analyze results of the winding temperature measurements.
|
|